I got a strange problem that the macOS's booting procedure was quited after selecting macOS from OpenCore and then reboot. After removing the OnBoard M.2 WiFi & Bluetooth(Because no options found to disable OnBoard M.2 WiFi & Bluetooth), it boots normally.
Item | Detail |
---|---|
Motherboard | Gigabyte Z790 Aorus Elite AX DDR5 Ver1.0 |
CPU | i5-13600K |
GPU | AMD Radeon RX6800 XT |
WiFi & Blutooth(PCIE) | Fenvi T919 |
WiFi & Blutooth(M.2 On board) | REMOVED PHYSICALLY |
Memory | Kinston DDR5 5200MHz 16GB x 2 |
Storages | M.2 SSD x 4 |
BIOS Version | F7 |
- OpenCore 0.9.3
- macOS Ventura 13.5
- Start and shutdown
- App Store login and download
- iCloud,iMessage,AirDrop
- WiFi, Bluetooth, Ethernet
- Can't sleep in both Windows 11 and macOS after booting from OpenCore. If boot from Windows 11's bootloader directly, sleeps as expected. This config may need to be fixed later.
- Google Chrome tab collapsed occasionally. Tried to close hardware acceleration options but didn't work, after reopening the same tabs for several times it works fine for that site.
- Secure Boot : Disabled
- Internal Graphics : Disabled
- Above 4G Decoding : Enabled
- Above 4GB MMIO BIOS assignment : Enabled
- Re-Size BAR Support : Disabled
- Intel Platform Trust Technology(PTT): Disabled
- Hyper-Threading : Enabled
- CFG Lock : Disabled
- Fast Boot - Disabled
- CSM - Disabled
- VT-d, Thunderbolt - Disabled
- Serial port - Disabled
- Intel SGX - Disabled
- OS type: Other OS
- EHCI/XHCI Hand-off - Enabled
- Security Device Support - Disable
- Internal Graphics - Disabled
- Generate model information after selecting
iMac 7,1
. - Hope your hackintosh come to you as soon as possibile and have a good night!
- Reset NVRAM after changing EFI
Key Shot | Functionality |
---|---|
Del | Get into BIOS Setup |
F12 | Select bootloader to start |
F10 | Save & Quit |
F2 | Change to Advanced Mode in BIOS UI |