The goal of this project is to make a lower cost esp32 module than the TinyPICO for my other projects.
The TinyPICO is great. It is small and uses low current in deep sleep but it costs me about 40$ CAD once it reaches me. I'd prefer if I could have something at around 10$ CAD which is the goal of this project.
The bare PCB costs 2.67$ CAD from OSH Park. Digikey BOM cost for 1 unit is 8.09$ CAD.
Total is 10.76$ CAD (worst case)
The programming is done through the JST connector using the Adafruit 3309 along with the following adapter:
The GENERIC-SPIRAM firmware can be downloaded from the following page:
https://micropython.org/download/esp32/
The module has been validated to work with:
esp32spiram-idf4-20210202-v1.14.bin
Bare PCB (OSH Park): 3.47$ CAD BOM (Digikey, 1 unit): 7.84$ CAD
Total: 11.31$ CAD (worst case)