Merge pull request #10627 from filecoin-project/phi/v1210

build: release: v1.21.0 prep

CHANGELOG.md

@@ -1,6 +1,6 @@
 # Lotus changelog
 
-# v1.21.0-rc2 / 2023-03-29
+# v1.21.0 / 2023-04-05
 
 This is an optional but highly recommended feature release of Lotus. It includes numerous improvements and enhancements for node operators, ETH RPC-providers and storage providers.
 
@@ -11,7 +11,7 @@ Before upgrading to this feature release read carefully through these bullet poi
 - Starting from this release, the SplitStore feature is automatically activated on new nodes. However, for existing Lotus users, you need to explicitly configure SplitStore by uncommenting the `EnableSplitstore` option in your `config.toml` file. To enable SplitStore, set `EnableSplitstore=true`, and to disable it, set `EnableSplitstore=false`. **It's important to note that your Lotus node will not start unless this configuration is properly set. Set it to false if you are running a full archival node!**
 - This feature release requires a **minimum Go version of v1.19.7 or higher to successfully build Lotus**. Additionally, Go version v1.20 and higher is now also supported.
 - **Storage Providers:** The proofs libraries now have CUDA enabled by default, which requires you to install (CUDA)[https://lotus.filecoin.io/tutorials/lotus-miner/cuda/] if you haven't already done so. If you prefer to use OpenCL on your GPUs instead, you can use the `FFI_USE_OPENCL=1` flag when building from source. On the other hand, if you want to disable GPUs altogether, you can use the `FFI_NO_GPU=1` environment variable when building from source.
-- **Storage Providers:** The `lotus-miner sectors extend` command has been refactored to the functionality of `lotus-miner sectors renew`. The issue where extions did not work has been fixed in this release candidate.
+- **Storage Providers:** The `lotus-miner sectors extend` command has been refactored to the functionality of `lotus-miner sectors renew`.
 - **Exchanges/Node operators/RPC-providers::** Execution traces (returned from `lotus state exec-trace`, `lotus state replay`, etc.), has changed to account for changes introduced by the by the FVM. **Please make sure to read the `Execution trace format change` section carefully, as these are interface breaking changes**
 - **Syncing issues:** If you have been struggling with syncing issues in normal operations you can try to adjust the amount of threads used for more concurrent FMV execution through via the `LOTUS_FVM_CONCURRENCY` enviroment variable. It is set to 4 threads by default. Recommended formula for concurrency == YOUR_RAM/4 , but max is 128. If you are a Storage Provider and are pushing many messages within a short period of time, exporting `LOTUS_SKIP_APPLY_TS_MESSAGE_CALL_WITH_GAS=1` will also help with keeping in sync.
 - **Catching up from a Snapshot:** Users have noticed that catching up sync from a snapshot is taking a lot longer these day. This is largely related to the built-in market actor consuming a lot of computational demand for block validation. A FIP for a short-term mitigation for this is currently in Last Call and will be included network version 19 upgrade if accepted. You [can read the FIP here.](https://github.com/filecoin-project/FIPs/blob/master/FIPS/fip-0060.md)
@@ -44,7 +44,7 @@ Node operators with higher memory specs can experiment with setting LOTUS_FVM_CO
 
 In this release there are four new expirmental scheduler assigners:
 
-- The `experiment-spread-qcount` - similar to the spread assigner but also takes nto account task counts which are in running/preparing/queued states.
+- The `experiment-spread-qcount` - similar to the spread assigner but also takes into account task counts which are in running/preparing/queued states.
 - The `experiment-spread-tasks` - similar to the spread assigner, but counts running tasks on a per-task-type basis
 - The `experiment-spread-tasks-qcount` -  similar to the spread assigner, but also takes into account task counts which are in running/preparing/queued states, as well as counting running tasks on a per-task-type basis. Check the results for this assigner on ([storage-only lotus-workers here](https://github.com/filecoin-project/lotus/issues/8566#issuecomment-1446978856)).
 - The `experiment-random` - In each schedule loop the assinger figures a set of all workers which can handle the task and then picks a random one. Check the results for this assigner on ([storage-only lotus-workers here](https://github.com/filecoin-project/lotus/issues/8566#issuecomment-1447064218)).
@@ -57,9 +57,13 @@ We have cleaned up some commands in the `lotus-worker` to make it less confusing
 
 **CLI speedups**
 
-The `lotus-Miner sector list` is now running in parallel - which should speed up the process from anywhere between 2x-10x+. You can tune it additionally with the `check-parallelism` option in the command. The `Lotus-Miner info` command also has a large speed improvement, as calls to the lotus legacy market has been removed.
+The `lotus-miner sector list` is now running in parallel - which should speed up the process from anywhere between 2x-10x+. You can tune it additionally with the `check-parallelism` option in the command. The `Lotus-Miner info` command also has a large speed improvement, as calls to the lotus legacy market has been removed.
 
 ## New features
+- feat: splitstore: limit moving gc threads (#10621) ([filecoin-project/lotus/#10621](https://github.com/filecoin-project/lotus/pull/10621))
+   - Makes moving gc less likely to cause node falling out of sync.
+- feat: splitstore: Update config default value (#10605) ([filecoin-project/lotus/#10605](https://github.com/filecoin-project/lotus/pull/10605))
+   - Sets Splitstore HotStoreMaxSpaceTarget config to 650GB as default
 - feat: splitstore: Splitstore enabled by default (#10429) ([filecoin-project/lotus#10429](https://github.com/filecoin-project/lotus/pull/10429))
    - Enables SplitStore by default on new Lotus nodes. Existing Lotus users need to explicitly configure 
 - feat: splitstore: Configure max space used by hotstore and GC makes best effort to respect ([filecoin-project/lotus#10391](https://github.com/filecoin-project/lotus/pull/10391))
@@ -182,9 +186,11 @@ The `lotus-Miner sector list` is now running in parallel - which should speed up
 - github.com/filecoin-project/go-fil-markets (v1.25.2 -> v1.27.0-rc1):
 - github.com/filecoin-project/go-jsonrpc (v0.2.1 -> v0.2.3):
 - github.com/filecoin-project/go-statemachine (v1.0.2 -> v1.0.3):
+- github.com/filecoin-project/go-state-types (v0.10.0 -> v0.11.0-alpha-3)
 - github.com/ipfs/go-cid (v0.3.2 -> v0.4.0):
 - github.com/ipfs/go-libipfs (v0.5.0 -> v0.7.0):
 - github.com/ipfs/go-path (v0.3.0 -> v0.3.1):
+- chore: deps: update to go-state-types v0.11.0-alpha-3 (([filecoin-project/lotus#10606](https://github.com/filecoin-project/lotus/pull/10606))
 - deps: update go-libp2p-pubsub to v0.9.3 ([filecoin-project/lotus#10483](https://github.com/filecoin-project/lotus/pull/10483))
 - deps: Update go-jsonrpc to v0.2.2 ([filecoin-project/lotus#10395](https://github.com/filecoin-project/lotus/pull/10395))
 - Update to go-data-transfer v2 and libp2p, still wip ([filecoin-project/lotus#10382](https://github.com/filecoin-project/lotus/pull/10382))

build/version.go

@@ -37,7 +37,7 @@ func BuildTypeString() string {
 }
 
 // BuildVersion is the local build version
-const BuildVersion = "1.21.0-rc2"
+const BuildVersion = "1.21.0"
 
 func UserVersion() string {
 	if os.Getenv("LOTUS_VERSION_IGNORE_COMMIT") == "1" {

documentation/en/cli-lotus-miner.md

@@ -7,7 +7,7 @@ USAGE:
    lotus-miner [global options] command [command options] [arguments...]
 
 VERSION:
-   1.21.0-rc2
+   1.21.0
 
 COMMANDS:
    init     Initialize a lotus miner repo

documentation/en/cli-lotus-worker.md

@@ -7,7 +7,7 @@ USAGE:
    lotus-worker [global options] command [command options] [arguments...]
 
 VERSION:
-   1.21.0-rc2
+   1.21.0
 
 COMMANDS:
    run        Start lotus worker

documentation/en/cli-lotus.md

@@ -7,7 +7,7 @@ USAGE:
    lotus [global options] command [command options] [arguments...]
 
 VERSION:
-   1.21.0-rc2
+   1.21.0
 
 COMMANDS:
    daemon   Start a lotus daemon process