-
-
Notifications
You must be signed in to change notification settings - Fork 231
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Urgent help - please! #714
Comments
@flobz if you get this. |
I have the standalone docker install, not via addon, but it should be similar. you can put this in your browser window
|
Amazing. Should this work via the casa login? Currently out with no local access? It’s https not http |
I cant seem to access via the HA IP address with get_vehicleinfo + VIN... is there another way? |
Mine says this does it mean its not supported!? "last_position": {"type": "Feature", "geometry": {"coordinates": [null, null, null], "type": "Point"}, |
@wifispray contact Peugeot assistance they might help you. |
No luck this time of year. You guys were my last hope. Thanks for replying.
…On Sat, 23 Dec 2023 at 16:58, Florian BEZANNIER ***@***.***> wrote:
@wifispray <https://github.com/wifispray> contact Peugeot they might help
you.
—
Reply to this email directly, view it on GitHub
<#714 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AGW4MA7BI6JQ732DIFQSO3DYK4ET5AVCNFSM6AAAAABBAXSCT6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQNRYGMZTCMJUGU>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
|
Also it’s a Corsa E
…On Sun, 24 Dec 2023 at 11:04, Wifi Guy ***@***.***> wrote:
No luck this time of year. You guys were my last hope. Thanks for
replying.
On Sat, 23 Dec 2023 at 16:58, Florian BEZANNIER ***@***.***>
wrote:
> @wifispray <https://github.com/wifispray> contact Peugeot they might
> help you.
>
> —
> Reply to this email directly, view it on GitHub
> <#714 (comment)>,
> or unsubscribe
> <https://github.com/notifications/unsubscribe-auth/AGW4MA7BI6JQ732DIFQSO3DYK4ET5AVCNFSM6AAAAABBAXSCT6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQNRYGMZTCMJUGU>
> .
> You are receiving this because you were mentioned.Message ID:
> ***@***.***>
>
|
I think it is depending on trim level of the car. |
Mine is also a Corsa E. assume it’s the same for all
…On Mon, 25 Dec 2023 at 10:31, larskarla ***@***.***> wrote:
I think it is depending on trim level of the car.
get_vehicleinfo gives me {"coordinates": [null, null, null] because my car
(Corsa-e) does not have GPS.
The only thing you can do is to start preconditioning until the battery
drops down to 50%...
—
Reply to this email directly, view it on GitHub
<#714 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AGW4MA5AZTIVU5C7LZH3MHLYLFIW7AVCNFSM6AAAAABBAXSCT6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQNRYHEYTMMRQGA>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
|
Some time has passed since the first post and I noticed you haven’t figured out a way to get this working. My eC4 wouldn’t show gps coordinates on the app. I thought it was some kind of error on it (sorry @flobz) but upon careful inspection of the payloads I understood Stellantis was just not providing it. The latitude and longitude were empty, as a lot of other fields. I found it odd but at some point a friend of mine who bought another eC4 with a higher trim level got an email from Stellantis saying they were upgrading his remote services to provide vehicle position over the API. At this point I gave up and understood this was a limitation imposed by Stellantis for the current api level used by this project, as other apps I was using at the time provided location. Fast forward to a few months later, at which point I start seeing altitude entries on the trips list out of nowhere. Needless to say, the map page was now being wonderfully rendered with my car trips on it. The only thing I did different was that I installed eevee (as they started providing support for our platform) and allowed them access to the Stellantis platform. (In the meantime I’ve seen some comments here on GitHub mentioning the API has some B2C and B2B levels and that may be it, I’m not into the subject and if there is any confirmation on this I would appreciate the added knowledge) It may be worth the shot and trying it. The process can be done in five minutes. Then it’s a matter of looking at the car info structure to see if it returns location data. |
Thanks for your email
Would love to give this a try. Did you follow any kind of guide to setup?
…On Mon, 25 Dec 2023 at 12:19, nosuchuser ***@***.***> wrote:
Hi All
thanks for reading. My car has been stolen, worse scenario. But I can see
in my paw dashboard that the last trip was 1km. But the info doesn’t show
in the map or can I find any GpS… is there anything I can find from my PSA
TO HA integration. Time is of the essence on this one.
Please can someone help
Some time has passed since the first post and I noticed you haven’t
figured out a way to get this working.
My eC4 wouldn’t show gps coordinates on the app. I thought it was some
kind of error on it (sorry @flobz <https://github.com/flobz>) but upon
careful inspection of the payloads I understood Stellantis was just not
providing it. The latitude and longitude were empty, as a lot of other
fields.
I found it odd but at some point a friend of mine who bought another eC4
with a higher trim level got an email from Stellantis saying they were
upgrading his remote services to provide vehicle position over the API. At
this point I gave up and understood this was a limitation imposed by
Stellantis for the current api level used by this project, as other apps I
was using at the time provided location.
Fast forward to a few months later, at which point I start seeing altitude
entries on the trips list out of nowhere. Needless to say, the map page was
now being wonderfully rendered with my car trips on it.
The only thing I did different was that I installed eevee (as they started
providing support for our platform) and allowed them access to the
Stellantis platform.
(In the meantime I’ve seen some comments here on GitHub mentioning the API
has some B2C and B2B levels and that may be it, I’m not into the subject
and if there is any confirmation on this I would appreciate the added
knowledge)
It may be worth the shot and trying it. The process can be done in five
minutes. Then it’s a matter of looking at the car info structure to see if
it returns location data.
https://eeveeapp.com
IMG_2098.png (view on web)
<https://github.com/flobz/psa_car_controller/assets/1007018/f64d6c41-2d81-4150-8149-81191d227f53>
IMG_2099.png (view on web)
<https://github.com/flobz/psa_car_controller/assets/1007018/d35fb278-a418-45d0-b783-154bde432c0c>
—
Reply to this email directly, view it on GitHub
<#714 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AGW4MA4TCY4QH3N3JG2IIM3YLFVNJAVCNFSM6AAAAABBAXSCT6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQNRYHE2TSOJZGU>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
|
It worked! Downloaded eevee app to android phone, signed up an added the car with stellantis password. Added a home location, and today eevee app tells me "charging, location home" |
I get a 400 error when I try to connect EEVEE app to the Vaxhqul account.
Did I do something wrong?
…On Wed, 27 Dec 2023 at 19:43, larskarla ***@***.***> wrote:
It worked! Downloaded eevee app to android phone, signed up an added the
car with stellantis password. Added a home location, and today eevee app
tells me "charging, location home"
get_vehicleinfo/ has gps location now!
Also, PSA car controller has altitude diff for the first time after more
than 600 trips, and the map is getting data.
Corsa-e, lowest trim level, phone not connected to car with cable during
the two trips tested.
—
Reply to this email directly, view it on GitHub
<#714 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AGW4MA45LYF5YTQ3KFCLSJDYLR24NAVCNFSM6AAAAABBAXSCT6VHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMYTQNZQGU3TSOJYG4>
.
You are receiving this because you were mentioned.Message ID:
***@***.***>
|
I'm also happy to confirm that the Eeveeapp trick worked! Yesterday I installed the app and today for the first time in 17 months I'm able to see trips on the map. Also some other data has changed from null to real figures like for example: Speed, Direction, Signal quality etc. Thanx @nosuchuser for a great tip! |
just to add on this. My location worked before. Though my trips showed on the map to be flying from start to end in a direct line. Out of curiosity I also registered in the eevee app and now my position gets updated more regularly showing close to actual routes taken. |
I get that as well :( I know the credentials are correct, as I use them to log in on this script (and have it saved in a password manager) |
As this post is referenced a lot, just wanted to mention that I went through the same issues (geo coordinates and SoH not provided by Stellantis servers in the beginning), but decided not to give another party access to my data. Instead, it fixed itself a few days later out of nowhere (in case of SoH, it even took a week or so before the first data points appeared...). So perhaps, just waiting a few days might also help. :-) |
what do you guys recommend for an petrol car? Am I able to add it to Eevee or is there another way to get full position information? |
I can confirm that this solves the issue on missing trips im maps. Just install EEVEE and added car and trips in maps are now shown. |
This also appears to work on similar apps - I was having an issue getting my Vauxhall to work with the Eevee app (getting a 400 error as above). Instead I registered my car on the Tronity (tronity.io) app and the location started working a couple of hours later. |
Hi All
thanks for reading. My car has been stolen, worse scenario. But I can see in my paw dashboard that the last trip was 1km. But the info doesn’t show in the map or can I find any GpS… is there anything I can find from my PSA TO HA integration. Time is of the essence on this one.
Please can someone help
The text was updated successfully, but these errors were encountered: