Skip to content

A WebRTC-SIP gateway for AVM Fritz!Box based on Kamailio and rtpengine.

License

Notifications You must be signed in to change notification settings

florian-h05/webrtc-sip-gw

Repository files navigation

webrtc-sip-gw

A SIP over WebSocket - SIP gateway for the AVM Fritz!Box based on Kamailio and rtpengine.

This gateway allows any SIP user of your Fritz!Box to perform calls with SIP over WebSocket, which is unsupported by the Fritz!Box.

Please note that this might also work for other SIP servers, however this container is developed for and tested with AVM Fritz!Boxes.

Important Information

To connect to the SIP over WebSocket from mobile clients like Android & iOS, it is required that you use TLS. webrtc-sip-gw will enable it’s internal TLS by default and therefore requires a certificate, but you can disable the internal TLS if you want to use a proxy like nginx instead.

The Docker container will automatically configure IP address and hostname/domain name for the webrtc-sip-gw, however in some cases (e.g. with multiplce NICs) this auto-configuration may pick the "wrong" settings. Set the MY_IP and MY_DOMAIN environment variables in the environment section of the docker-compose file to override the auto-configured values.

Internal TLS

Unless internal TLS is not explicitly disabled, TLS certificate and private key are required at these (container internal) paths:

  • certificate: /etc/ssl/fullchain.pem
  • private key: /etc/ssl/privkey.pem

The provided docker-compose file includes mounts for these two files.

nginx Reverse Proxy

Instead of using the internal TLS and therefore needing to provide a certificate, you can use an existing nginx reverse proxy.

Just add this location block to a valid server configuration:

    location /sip {
        proxy_pass                    http://FILL_YOUR_IP:8090; # Adjust to your webrtc-sip-gw Docker host's IP
        proxy_http_version            1.1;
        proxy_set_header Upgrade      $http_upgrade;
        proxy_set_header Connection   "upgrade";
        proxy_read_timeout            86400;
    }

Ports

SIP over WebSocket is exposed on TCP ports 8090 (unsecured) and, if internal TLS is enabled, 4443 (secured). Additionally, UDP ports 23400-23500 are exposed by rtpengine.

If you use any firewall, these ports need to be open! For ufw, you can open these ports using the following command:

ufw allow in from any to any port 23400:23500 proto udp comment "webrtc-sip-gw"

Platform Support

webrtc-sip-gw is built for Linux on amd64, arm64 and armv7l, so it should run on most modern Linux machines, including Raspberry Pis.

I have tested it on amd64, in case someone can test on arm64 or armv7, please report (open an issue) how it works.

Container Setup Guide

Directory & Docker Compose File

Create a new directory on your Docker host and place the docker-compose.yml there.

If you want to disable the internal TLS, set the value of the TLS_DISABLE environment variable in the docker-compose file to true:

Unless you have not explicitly disabled TLS:

  • cd into the new directory.
  • Create a ssl folder.

Hostname & IP Address

By default, webrtc-sip-gw is automatically using the hostname of your Docker host and the IP address of an interface.

In case you need to use a different hostname or IP address than the automatically set, e.g. because you have multiple interfaces and webrtc-sip-gw selected the wrong one, you can overwrite the automatically set values.

Set the MY_IP environment variable to overwrite the IP address, and set the MY_DOMAIN environment variable to overwrite the hostname.

Certificate

The certificate should be placed in the ssl directory and named sipgw.crt. The private key should also be placed on the ssl directory and named sipgw.key.

The certificate needs to be installed and trusted on your clients.

You can either use a certificate from a (public or private) CA or generate your own self-signed certificate.

Using OpenSSL to Generate Self-Signed Certificates

OpenSSL is packaged for most Linux distributions, installing it should be as simple as:

sudo apt install openssl

OpenSSL can be told to generate a 2048 bit long RSA key and a certificate that is valid for 825 days, but there are some important requirements:

  • You have any hostname for the CN (common name) of the certificate. Enter this hostname when OpenSSL asks for Common Name (e.g. server FQDN or YOUR name) []:. It is not required that the server can be reached under this hostname, but the certificate must have a hostname as CN.
  • Replace <IP-ADDRESS> with your server's IP address.
  • Replace <ADDITIONAL-HOSTNAME> with another hostname the certificate should be valid for, or delete ,DNS:<ADDITIONAL-HOSTNAME>.
openssl req -x509 -nodes -days 825 -newkey rsa:2048 -addext 'subjectAltName=IP:<IP-ADDRESS>,DNS:<ADDITIONAL-HOSTNAME>' -addext 'keyUsage = digitalSignature,keyEncipherment' -addext 'extendedKeyUsage = serverAuth' -keyout ./ssl/sipgw.key -out ./ssl/sipgw.crt

This certificate follows the Requirements for trusted certificates in iOS 13 and macOS 10.15. Key usage and extended key usage are set as defined in RFC5280.

You will be prompted for some information which you will need to fill out for the certificate, please remember to fill in a hostname when it asks for Common Name.

Container Start-Up

Execute the following:

sudo docker-compose up -d

The following error messages can be ignored during startup:

ERROR: rtpengine [rtpengine.c:2887]: send_rtpp_command(): can’t send command „ping“ to RTPEngine <udp:127.0.0.1:22222>
ERROR: rtpengine [rtpengine.c:2788]: rtpp_test(): proxy did not respond to ping

Client Setup Guide

Install & Trust Certificate on Clients

Copy the sipgw.crt (only this file, not the key!) to your clients and open the file.

On Android and Windows, a popup with a certificate installation wizard should open up.

On iOS/iPadOS, a popup that tells you to visit the settings should open up. Visit the settings as told and proceed.

openHAB MainUI Setup

Using the oh-sipclient component or widget, use the following configuration:

  • websocketUrl: wss://YOUR-DOCKER-HOST:4443
  • domain: fritz.box
  • username: any valid SIP user in your Fritz!Box
  • password: password of your valid SIP user

Acknowledgments

Thanks to @havfo for sharing the configuration files on havfo/WEBRTC-to-SIP. Huge thanks to @nanosonde for initially creating this project.