School IoT Project for the M5Stack Basic. With a ESP32 Chip
To be able to use the project on your own, you will need to create a new Thing at the Arduino IoT Cloud.
Configure the following Variables inside the Arduino IoT Cloud:
| Name | Type |
|---|---|
| enableLED | bool |
| hpa | float |
| hpa_scale | int |
| hum | float |
| tmp | float |
Follow the steps at Arduino Cloud to configure ur device correctly with the service.
u should then be able to Upload the Sketch and run it on ur Device.
For this to work propperly there should be connected two Modules to ur M5Stack. One beeing a ENV Module to detect hum/tmp and pressure. The secound Module is the RGB module which is used to Show the current Temperature in its Color representation.
Ports:
RGB Module: Black
ENV Module: Red
