Skip to content

Commit

Permalink
Add Aurora One Variant
Browse files Browse the repository at this point in the history 
https://www.bfykorea.com/aurora-one/

Supersede stm32duino#1176

Signed-off-by: JongHyeon Lee <jhlee@bfykorea.com>
Co-authored-by: Frederic.Pillon <frederic.pillon@st.com>
  • Loading branch information
@fpistm
JongHyeon Lee and fpistm committed Dec 11, 2020
1 parent 46158a3 commit 1070737
Show file tree
Hide file tree
Showing 7 changed files with 419 additions and 2 deletions.
1 change: 1 addition & 0 deletions README.md
View file
Original file line number Diff line number Diff line change
Expand Up @@ -209,6 +209,7 @@ User can add a STM32 based board following this [wiki](https://github.com/stm32d

| Status | Device(s) | Name | Release | Notes |
| :----: | :-------: | ---- | :-----: | :---- |
| :yellow_heart: | STM32G030K8 | [Aurora One](https://www.bfykorea.com/aurora-one) | **2.0.0** |
| :yellow_heart: | STM32G031K6<br>STM32G030K8 | Generic Board | **2.0.0** | |
| :yellow_heart: | STM32G031J4<br>STM32G031J6 | Generic Board | **2.0.0** | |
| :yellow_heart: | STM32G071R6<br>STM32G071R8<br>STM32G071RB | Generic Board | **2.0.0** | |
Expand Down
8 changes: 8 additions & 0 deletions boards.txt
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1661,6 +1661,14 @@ GenG0.menu.pnum.Generic_G030K8.build.board=GENERIC_G030K8
GenG0.menu.pnum.Generic_G030K8.build.product_line=STM32G030xx
GenG0.menu.pnum.Generic_G030K8.build.variant=STM32G0xx/Generic_G030Kx

# Aurora One G030K8
GenG0.menu.pnum.AURORA_ONE=Aurora One
GenG0.menu.pnum.AURORA_ONE.upload.maximum_size=65536
GenG0.menu.pnum.AURORA_ONE.upload.maximum_data_size=16384
GenG0.menu.pnum.AURORA_ONE.build.board=Aurora_One
GenG0.menu.pnum.AURORA_ONE.build.product_line=STM32G030xx
GenG0.menu.pnum.AURORA_ONE.build.variant=STM32G0xx/Generic_G030Kx

# Generic G031J4
GenG0.menu.pnum.Generic_G031J4=Generic G031J4
GenG0.menu.pnum.Generic_G031J4.upload.maximum_size=16384
Expand Down
156 changes: 156 additions & 0 deletions variants/Aurora_One_G030K8/PeripheralPins.c
View file
Original file line number Diff line number Diff line change
@@ -0,0 +1,156 @@
/*
*******************************************************************************
* Copyright (c) 2020, STMicroelectronics
* All rights reserved.
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
*******************************************************************************
* Automatically generated from STM32G030K(6-8)Tx.xml
*/
#include "Arduino.h"
#include "PeripheralPins.h"

/* =====
* Note: Commented lines are alternative possibilities which are not used per default.
* If you change them, you will have to know what you do
* =====
*/

//*** ADC ***

#ifdef HAL_ADC_MODULE_ENABLED
WEAK const PinMap PinMap_ADC[] = {
{PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0
{PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
{PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2
{PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
{PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
{PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
{PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
{PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
{PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
{PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
{NC, NP, 0}
};
#endif

//*** No DAC ***

//*** I2C ***

#ifdef HAL_I2C_MODULE_ENABLED
WEAK const PinMap PinMap_I2C_SDA[] = {
{PA_12, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C2)},
{PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)},
{NC, NP, 0}
};
#endif

#ifdef HAL_I2C_MODULE_ENABLED
WEAK const PinMap PinMap_I2C_SCL[] = {
{PA_11, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C2)},
{PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C1)},
{NC, NP, 0}
};
#endif

//*** PWM ***

#ifdef HAL_TIM_MODULE_ENABLED
WEAK const PinMap PinMap_PWM[] = {
{PA_6, TIM16, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM16, 1, 0)}, // TIM16_CH1
{PA_7, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM14, 1, 0)}, // TIM14_CH1
{PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 1, 0)}, // TIM1_CH1
{PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 3, 0)}, // TIM1_CH3
{PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM1, 4, 0)}, // TIM1_CH4
{PB_0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 3, 0)}, // TIM3_CH3
{PB_1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 4, 0)}, // TIM3_CH4
{PB_3, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
{PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 1, 0)}, // TIM3_CH1
{PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM3, 2, 0)}, // TIM3_CH2
{PB_9, TIM17, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM17, 1, 0)}, // TIM17_CH1
{NC, NP, 0}
};
#endif

//*** SERIAL ***

#ifdef HAL_UART_MODULE_ENABLED
WEAK const PinMap PinMap_UART_TX[] = {
{PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
{PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
{NC, NP, 0}
};
#endif

#ifdef HAL_UART_MODULE_ENABLED
WEAK const PinMap PinMap_UART_RX[] = {
{PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
{PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART1)},
{NC, NP, 0}
};
#endif

#ifdef HAL_UART_MODULE_ENABLED
WEAK const PinMap PinMap_UART_RTS[] = {
{PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
{PB_3, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)},
{NC, NP, 0}
};
#endif

#ifdef HAL_UART_MODULE_ENABLED
WEAK const PinMap PinMap_UART_CTS[] = {
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_USART2)},
{PB_4, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)},
{NC, NP, 0}
};
#endif

//*** SPI ***

#ifdef HAL_SPI_MODULE_ENABLED
WEAK const PinMap PinMap_SPI_MOSI[] = {
{PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
{PB_7, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI2)},
{NC, NP, 0}
};
#endif

#ifdef HAL_SPI_MODULE_ENABLED
WEAK const PinMap PinMap_SPI_MISO[] = {
{PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
{PB_2, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI2)},
{NC, NP, 0}
};
#endif

#ifdef HAL_SPI_MODULE_ENABLED
WEAK const PinMap PinMap_SPI_SCLK[] = {
{PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
{PB_8, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI2)},
{NC, NP, 0}
};
#endif

#ifdef HAL_SPI_MODULE_ENABLED
WEAK const PinMap PinMap_SPI_SSEL[] = {
{PA_8, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_SPI2)},
{PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
{NC, NP, 0}
};
#endif

//*** No CAN ***

//*** No ETHERNET ***

//*** No QUADSPI ***

//*** No USB ***

//*** No SD ***
3 changes: 2 additions & 1 deletion variants/STM32G0xx/Generic_G030Kx/variant.cpp
View file
Original file line number Diff line number Diff line change
Expand Up @@ -10,7 +10,7 @@
*
*******************************************************************************
*/

#if defined(ARDUINO_GENERIC_G030K6) || defined(ARDUINO_GENERIC_G030K8)
#include "pins_arduino.h"

#ifdef __cplusplus
Expand Down Expand Up @@ -179,3 +179,4 @@ WEAK void SystemClock_Config(void)
#ifdef __cplusplus
} // extern "C"
#endif
#endif /* ARDUINO_GENERIC_* */
6 changes: 5 additions & 1 deletion variants/STM32G0xx/Generic_G030Kx/variant.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -10,9 +10,12 @@
*
*******************************************************************************
*/

#if !defined(ARDUINO_GENERIC_G030K6) && !defined(ARDUINO_GENERIC_G030K8)
#include "variant_Aurora_One.h"
#else
#ifndef _VARIANT_ARDUINO_STM32_
#define _VARIANT_ARDUINO_STM32_

#ifdef __cplusplus
extern "C" {
#endif // __cplusplus
Expand Down Expand Up @@ -158,3 +161,4 @@ extern "C" {
#endif

#endif /* _VARIANT_ARDUINO_STM32_ */
#endif /* ARDUINO_GENERIC_* */
136 changes: 136 additions & 0 deletions variants/STM32G0xx/Generic_G030Kx/variant_Aurora_One.cpp
View file
Original file line number Diff line number Diff line change
@@ -0,0 +1,136 @@
/*
*******************************************************************************
* Copyright (c) 2020, STMicroelectronics
* All rights reserved.
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
*******************************************************************************
*/
#if defined(ARDUINO_AURORA_ONE)
#include "pins_arduino.h"

#ifdef __cplusplus
extern "C" {
#endif

// Digital PinName array
const PinName digitalPin[] = {
PA_10, //D0
PA_9, //D1
PA_6, //D2/A6
PA_7, //D3/A7
PA_8, //D4
PC_6, //D5
PA_11, //D6/A10
PA_12, //D7/A11
PB_2, //D8/A12
PB_1, //D9/A9
PB_0, //D10/A8
PB_5, //D11
PB_4, //D12
PB_3, //D13/LED
PB_7, //D14/A13
PB_6, //D15
PB_9, //D16/MAINSL
PB_8, //D17/MAINSL
PA_15, //D18/MAINSL
PA_14, //D19/A14/SWCLK
PA_13, //D20/A15/SWDIO
PA_0, //D21/A0
PA_1, //D22/A1
PA_2, //D23/A2
PA_3, //D24/A3
PA_4, //D25/A4
PA_5, //D26/A5
PA_9_ALTR, //D27
PA_10_ALTR, //D28
PA_6_ALT0, //D29
PA_7_ALT0, //D30
PA_7_ALT1, //D31
PA_7_ALT2, //D32
PB_0_ALT0, //D33
PB_1_ALT0, //D34
PB_1_ALT1, //D35
PB_6_ALT0 //D36
};

// Analog (Ax) pin number array
const uint32_t analogInputPin[] = {
21, //A0
22, //A1
23, //A2
24, //A3
25, //A4
26, //A5
2, //A6
3, //A7
10, //A8
9, //A9
6, //A10
7, //A11
8, //A12
14, //A13
19, //A14
20 //A15
};

#ifdef __cplusplus
}
#endif

// ----------------------------------------------------------------------------

#ifdef __cplusplus
extern "C" {
#endif

/**
* @brief System Clock Configuration
* @param None
* @retval None
*/
WEAK void SystemClock_Config(void)
{
RCC_OscInitTypeDef RCC_OscInitStruct = {};
RCC_ClkInitTypeDef RCC_ClkInitStruct = {};
RCC_PeriphCLKInitTypeDef PeriphClkInit = {};

/* Configure the main internal regulator output voltage */
HAL_PWREx_ControlVoltageScaling(PWR_REGULATOR_VOLTAGE_SCALE1);
/*
* Initializes the RCC Oscillators according to the specified parameters
* in the RCC_OscInitTypeDef structure.
*/
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
RCC_OscInitStruct.HSIDiv = RCC_HSI_DIV1;
RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
RCC_OscInitStruct.PLL.PLLM = RCC_PLLM_DIV1;
RCC_OscInitStruct.PLL.PLLN = 8;
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
RCC_OscInitStruct.PLL.PLLR = RCC_PLLR_DIV2;
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
Error_Handler();
}
/* Initializes the CPU, AHB and APB buses clocks */
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK
| RCC_CLOCKTYPE_PCLK1;
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;

if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_2) != HAL_OK) {
Error_Handler();
}
}

#ifdef __cplusplus
}
#endif
#endif /* ARDUINO_AURORA_ONE */
Loading

0 comments on commit 1070737

Please sign in to comment.