4.15.rc4 #2

frank-w · 2017-12-18T08:10:01Z

Update

The coretemp driver build fails when CONFIG_PCI is not enabled because it uses a function that does not have a stub for that config case, so add the function stub. ../drivers/hwmon/coretemp.c: In function 'adjust_tjmax': ../drivers/hwmon/coretemp.c:250:9: error: implicit declaration of function 'pci_get_domain_bus_and_slot' [-Werror=implicit-function-declaration] struct pci_dev *host_bridge = pci_get_domain_bus_and_slot(0, 0, devfn); ../drivers/hwmon/coretemp.c:250:32: warning: initialization makes pointer from integer without a cast [enabled by default] struct pci_dev *host_bridge = pci_get_domain_bus_and_slot(0, 0, devfn); Signed-off-by: Randy Dunlap <rdunlap@infradead.org> [bhelgaas: identical patch also by Arnd Bergmann <arnd@arndb.de>] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Guenter Roeck <linux@roeck-us.net>

Break the loop if we can't find some address space for a 64bit BAR. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

When we have a multi-socket system, each CPU core needs the same setup. Since this is tricky to do in the fixup code, don't enable a 64bit BAR on multi-socket systems for now. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

…lculation Documentation/x86/topology.txt defines smp_num_siblings as "The number of threads in a core". Since commit bbb65d2 ("x86: use cpuid vector 0xb when available for detecting cpu topology") smp_num_siblings is the maximum number of threads in a core. If Simultaneous MultiThreading (SMT) is disabled on a system, smp_num_siblings is 2 and not 1 as expected. Use topology_max_smt_threads(), which contains the active numer of threads, in the __max_logical_packages calculation. On a single socket, single core, single thread system __max_smt_threads has not been updated when the __max_logical_packages calculation happens, so its zero which makes the package estimate fail. Initialize it to one, which is the minimum number of threads on a core. [ tglx: Folded the __max_smt_threads fix in ] Fixes: b4c0a73 ("x86/smpboot: Fix __max_logical_packages estimate") Reported-by: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Prarit Bhargava <prarit@redhat.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Jakub Kicinski <kubakici@wp.pl> Cc: netdev@vger.kernel.org Cc: "netdev@vger.kernel.org" Cc: Clark Williams <williams@redhat.com> Link: https://lkml.kernel.org/r/20171204164521.17870-1-prarit@redhat.com

Prerequisite for fixing the current problem of instantaneous reboots when a 5-level paging kernel is booted on 4-level paging hardware. At the same time this change prepares the decompression code to boot-time switching between 4- and 5-level paging. [ tglx: Folded the GCC < 5 fix. ] Fixes: 77ef56e ("x86: Enable 5-level paging support via CONFIG_X86_5LEVEL=y") Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andi Kleen <ak@linux.intel.com> Cc: stable@vger.kernel.org Cc: Andy Lutomirski <luto@amacapital.net> Cc: linux-mm@kvack.org Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lkml.kernel.org/r/20171204124059.63515-2-kirill.shutemov@linux.intel.com

If the machine does not support the paging mode for which the kernel was compiled, the boot process cannot continue. It's not possible to let the kernel detect the mismatch as it does not even reach the point where cpu features can be evaluted due to a triple fault in the KASLR setup. Instead of instantaneous silent reboot, emit an error message which gives the user the information why the boot fails. Fixes: 77ef56e ("x86: Enable 5-level paging support via CONFIG_X86_5LEVEL=y") Reported-by: Borislav Petkov <bp@suse.de> Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Borislav Petkov <bp@suse.de> Cc: Andi Kleen <ak@linux.intel.com> Cc: stable@vger.kernel.org Cc: Andy Lutomirski <luto@amacapital.net> Cc: linux-mm@kvack.org Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: https://lkml.kernel.org/r/20171204124059.63515-3-kirill.shutemov@linux.intel.com

platform_device_id are not supposed to change at runtime. All functions working with platform_device_id provided by <linux/platform_device.h> work with const platform_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

The alternate port number is used as an array index in the IB security implementation, invalid values can result in a kernel panic. Cc: <stable@vger.kernel.org> # v4.12 Fixes: d291f1a ("IB/core: Enforce PKey security on QPs") Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>

Per the infiniband spec an SMI MAD can have any PKey. Checking the pkey on SMI MADs is not necessary, and it seems that some older adapters using the mthca driver don't follow the convention of using the default PKey, resulting in false denials, or errors querying the PKey cache. SMI MAD security is still enforced, only agents allowed to manage the subnet are able to receive or send SMI MADs. Reported-by: Chris Blake <chrisrblake93@gmail.com> Cc: <stable@vger.kernel.org> # v4.12 Fixes: 47a2b33 ("IB/core: Enforce security on management datagrams") Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>

Mistakenly the driver didn't allow RSS hash fields combinations which involve both IPv4 and IPv6 protocols. This bug caused to failures for user's use cases for RSS. Consequently, this patch fixes this bug and allows any combination that the HW can support. Additionally, the patch fixes the driver to return an error in case the user provides an unsupported mask for RSS hash fields. Fixes: 3078f5f ("IB/mlx4: Add support for RSS QP") Signed-off-by: Guy Levi <guyle@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>

The RDMA netlink core code checks validity of messages by ensuring that type and operand are in range. It works well for almost all clients except NLDEV, which has cb_table less than number of operands. Request to access such operand will trigger the following kernel panic. This patch updates all places where cb_table is declared for the consistency, but only NLDEV is actually need it. general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN Modules linked in: CPU: 0 PID: 522 Comm: syz-executor6 Not tainted 4.13.0+ #4 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5-0-ge51488c-20140602_164612-nilsson.home.kraxel.org 04/01/2014 task: ffff8800657799c0 task.stack: ffff8800695d000 RIP: 0010:rdma_nl_rcv_msg+0x13a/0x4c0 RSP: 0018:ffff8800695d7838 EFLAGS: 00010207 RAX: dffffc0000000000 RBX: 1ffff1000d2baf0b RCX: 00000000704ff4d7 RDX: 0000000000000000 RSI: ffffffff81ddb03c RDI: 00000003827fa6bc RBP: ffff8800695d7900 R08: ffffffff82ec0578 R09: 0000000000000000 R10: ffff8800695d7900 R11: 0000000000000001 R12: 000000000000001c R13: ffff880069d31e00 R14: 00000000ffffffff R15: ffff880069d357c0 FS: 00007fee6acb8700(0000) GS:ffff88006ca00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000201a9000 CR3: 0000000059766000 CR4: 00000000000006b0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? rdma_nl_multicast+0x80/0x80 rdma_nl_rcv+0x36b/0x4d0 ? ibnl_put_attr+0xc0/0xc0 netlink_unicast+0x4bd/0x6d0 ? netlink_sendskb+0x50/0x50 ? drop_futex_key_refs.isra.4+0x68/0xb0 netlink_sendmsg+0x9ab/0xbd0 ? nlmsg_notify+0x140/0x140 ? wake_up_q+0xa1/0xf0 ? drop_futex_key_refs.isra.4+0x68/0xb0 sock_sendmsg+0x88/0xd0 sock_write_iter+0x228/0x3c0 ? sock_sendmsg+0xd0/0xd0 ? do_futex+0x3e5/0xb20 ? iov_iter_init+0xaf/0x1d0 __vfs_write+0x46e/0x640 ? sched_clock_cpu+0x1b/0x190 ? __vfs_read+0x620/0x620 ? __fget+0x23a/0x390 ? rw_verify_area+0xca/0x290 vfs_write+0x192/0x490 SyS_write+0xde/0x1c0 ? SyS_read+0x1c0/0x1c0 ? trace_hardirqs_on_thunk+0x1a/0x1c entry_SYSCALL_64_fastpath+0x18/0xad RIP: 0033:0x7fee6a74a219 RSP: 002b:00007fee6acb7d58 EFLAGS: 00000212 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000638000 RCX: 00007fee6a74a219 RDX: 0000000000000078 RSI: 0000000020141000 RDI: 0000000000000006 RBP: 0000000000000046 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000212 R12: ffff8800695d7f98 R13: 0000000020141000 R14: 0000000000000006 R15: 00000000ffffffff Code: d6 48 b8 00 00 00 00 00 fc ff df 66 41 81 e4 ff 03 44 8d 72 ff 4a 8d 3c b5 c0 a6 7f 82 44 89 b5 4c ff ff ff 48 89 f9 48 c1 e9 03 <0f> b6 0c 01 48 89 f8 83 e0 07 83 c0 03 38 c8 7c 08 84 c9 0f 85 RIP: rdma_nl_rcv_msg+0x13a/0x4c0 RSP: ffff8800695d7838 ---[ end trace ba085d123959c8ec ]--- Kernel panic - not syncing: Fatal exception Cc: syzkaller <syzkaller@googlegroups.com> Fixes: b4c598a ("RDMA/netlink: Implement nldev device dumpit calback") Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>

In __flush_qp(), the CQ ARMED bit was being cleared regardless of whether any notification is actually needed. This resulted in the iser termination logic getting stuck in ib_drain_sq() because the CQ was not marked ARMED and thus the drain CQE notification wasn't triggered. This new bug was exposed when this commit was merged: commit cbb40fa ("iw_cxgb4: only call the cq comp_handler when the cq is armed") Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

The added check produces a build error when CONFIG_PROC_FS is disabled: net/ipv4/netfilter/ipt_CLUSTERIP.c: In function 'clusterip_net_exit': net/ipv4/netfilter/ipt_CLUSTERIP.c:822:28: error: 'cn' undeclared (first use in this function) This moves the variable declaration out of the #ifdef to make it available to the WARN_ON_ONCE(). Fixes: 613d077 ("netfilter: exit_net cleanup check added") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Before commit 0df21c8 ("scsi: implement .get_budget and .put_budget for blk-mq"), we run queue after 3ms if queue is idle and SCSI device queue isn't ready, which is done in handling BLK_STS_RESOURCE. After commit 0df21c8 is introduced, queue won't be run any more under this situation. IO hang is observed when timeout happened, and this patch fixes the IO hang issue by running queue after delay in scsi_dev_queue_ready, just like non-mq. This issue can be triggered by the following script[1]. There is another issue which can be covered by running idle queue: when .get_budget() is called on request coming from hctx->dispatch_list, if one request just completes during .get_budget(), we can't depend on SCSI's restart to make progress any more. This patch fixes the race too. With this patch, we basically recover to previous behaviour (before commit 0df21c8) of handling idle queue when running out of resource. [1] script for test/verify SCSI timeout rmmod scsi_debug modprobe scsi_debug max_queue=1 DEVICE=`ls -d /sys/bus/pseudo/drivers/scsi_debug/adapter*/host*/target*/*/block/* | head -1 | xargs basename` DISK_DIR=`ls -d /sys/block/$DEVICE/device/scsi_disk/*` echo "using scsi device $DEVICE" echo "-1" >/sys/bus/pseudo/drivers/scsi_debug/every_nth echo "temporary write through" >$DISK_DIR/cache_type echo "128" >/sys/bus/pseudo/drivers/scsi_debug/opts echo none > /sys/block/$DEVICE/queue/scheduler dd if=/dev/$DEVICE of=/dev/null bs=1M iflag=direct count=1 & sleep 5 echo "0" >/sys/bus/pseudo/drivers/scsi_debug/opts wait echo "SUCCESS" Fixes: 0df21c8 ("scsi: implement .get_budget and .put_budget for blk-mq") Signed-off-by: Ming Lei <ming.lei@redhat.com> Tested-by: Holger Hoffstätte <holger@applied-asynchrony.com> Reviewed-by: Bart Van Assche <bart.vanassche@wdc.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

A regression fix introduced a harmless type mismatch warning: drivers/scsi/bfa/bfad_bsg.c: In function 'bfad_im_bsg_vendor_request': drivers/scsi/bfa/bfad_bsg.c:3137:35: error: initialization of 'struct bfad_im_port_s *' from 'long unsigned int' makes pointer from integer without a cast [-Werror=int-conversion] struct bfad_im_port_s *im_port = shost->hostdata[0]; ^~~~~ drivers/scsi/bfa/bfad_bsg.c: In function 'bfad_im_bsg_els_ct_request': drivers/scsi/bfa/bfad_bsg.c:3353:35: error: initialization of 'struct bfad_im_port_s *' from 'long unsigned int' makes pointer from integer without a cast [-Werror=int-conversion] struct bfad_im_port_s *im_port = shost->hostdata[0]; This changes the code back to shost_priv() once more, but encapsulates it in an inline function to document the rather unusual way of using the private data only as a pointer to the previously allocated structure. I did not try to get rid of the extra indirection level entirely, which would have been rather invasive and required reworking the entire initialization sequence. Fixes: 4534982 ("scsi: bfa: fix access to bfad_im_port_s") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>

Negative child dentry holds reference on inode's alias, it makes d_prune_aliases() do nothing. Cc: stable@vger.kernel.org Signed-off-by: "Yan, Zheng" <zyan@redhat.com> Reviewed-by: Jeff Layton <jlayton@redhat.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>

Add more stubs to make it build. Fixes: 81fbfe8 ("ptr_ring: use kmalloc_array()") Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Commit ca5beb7 ("dm mpath: micro-optimize the hot path relative to MPATHF_QUEUE_IF_NO_PATH") caused bio-based DM-multipath to fail mptest's "test_02_sdev_delete". Restoring the logic that existed prior to commit ca5beb7 fixes this bio-based DM-multipath regression. Also verified all mptest tests pass with request-based DM-multipath. This commit effectively reverts commit ca5beb7 -- but it does so without reintroducing the need to take the m->lock spinlock in must_push_back_{rq,bio}. Fixes: ca5beb7 ("dm mpath: micro-optimize the hot path relative to MPATHF_QUEUE_IF_NO_PATH") Cc: stable@vger.kernel.org # 4.12+ Signed-off-by: Mike Snitzer <snitzer@redhat.com>

When system is under memory pressure it is observed that dm bufio shrinker often reclaims only one buffer per scan. This change fixes the following two issues in dm bufio shrinker that cause this behavior: 1. ((nr_to_scan - freed) <= retain_target) condition is used to terminate slab scan process. This assumes that nr_to_scan is equal to the LRU size, which might not be correct because do_shrink_slab() in vmscan.c calculates nr_to_scan using multiple inputs. As a result when nr_to_scan is less than retain_target (64) the scan will terminate after the first iteration, effectively reclaiming one buffer per scan and making scans very inefficient. This hurts vmscan performance especially because mutex is acquired/released every time dm_bufio_shrink_scan() is called. New implementation uses ((LRU size - freed) <= retain_target) condition for scan termination. LRU size can be safely determined inside __scan() because this function is called after dm_bufio_lock(). 2. do_shrink_slab() uses value returned by dm_bufio_shrink_count() to determine number of freeable objects in the slab. However dm_bufio always retains retain_target buffers in its LRU and will terminate a scan when this mark is reached. Therefore returning the entire LRU size from dm_bufio_shrink_count() is misleading because that does not represent the number of freeable objects that slab will reclaim during a scan. Returning (LRU size - retain_target) better represents the number of freeable objects in the slab. This way do_shrink_slab() returns 0 when (LRU size < retain_target) and vmscan will not try to scan this shrinker avoiding scans that will not reclaim any memory. Test: tested using Android device running <AOSP>/system/extras/alloc-stress that generates memory pressure and causes intensive shrinker scans Signed-off-by: Suren Baghdasaryan <surenb@google.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com>

When babble condition happens, the musb controller might automatically turns off VBUS. On DA8xx platform, the controller generates drvvbus interrupt for turning off VBUS along with the babble interrupt. In this case, we should handle the babble interrupt first and recover from the babble condition. This change ignores the drvvbus interrupt if babble interrupt is also generated at the same time, so the babble recovery routine works properly. Cc: stable@vger.kernel.org # v3.16+ Signed-off-by: Bin Liu <b-liu@ti.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is another JMS567-based USB3 UAS enclosure (152d:0578) that fails with the following error: [sda] tag#0 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [sda] tag#0 Sense Key : Illegal Request [current] [sda] tag#0 Add. Sense: Invalid field in cdb The issue occurs both with UAS (occasionally) and mass storage (immediately after mounting a FS on a disk in the enclosure). Enabling US_FL_BROKEN_FUA quirk solves this issue. This patch adds an UNUSUAL_DEV with US_FL_BROKEN_FUA for the enclosure for both UAS and mass storage. Signed-off-by: David Kozub <zub@linux.fjfi.cvut.cz> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…ecent gcc with -Werror) Fixes following build error: vhci_driver.c: In function 'refresh_imported_device_list': vhci_driver.c:118:37: error: 'snprintf' output may be truncated before the last format character [-Werror=format-truncation=] snprintf(status, sizeof(status), "status.%d", i); ^~~~~~~~~~~ vhci_driver.c:118:4: note: 'snprintf' output between 9 and 18 bytes into a destination of size 17 snprintf(status, sizeof(status), "status.%d", i); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors Signed-off-by: Julien BOIBESSOT <julien.boibessot@armadeus.com> Acked-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

get_pipe() routine doesn't validate the input endpoint number and uses to reference ep_in and ep_out arrays. Invalid endpoint number can trigger BUG(). Range check the epnum and returning error instead of calling BUG(). Change caller stub_recv_cmd_submit() to handle the get_pipe() error return. Reported-by: Secunia Research <vuln@secunia.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Harden CMD_SUBMIT path to handle malicious input that could trigger large memory allocations. Add checks to validate transfer_buffer_length and number_of_packets to protect against bad input requesting for unbounded memory allocations. Validate early in get_pipe() and return failure. Reported-by: Secunia Research <vuln@secunia.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

When a client has a USB device attached over IP, the vhci_hcd driver is locally leaking a socket pointer address via the /sys/devices/platform/vhci_hcd/status file (world-readable) and in debug output when "usbip --debug port" is run. Fix it to not leak. The socket pointer address is not used at the moment and it was made visible as a convenient way to find IP address from socket pointer address by looking up /proc/net/{tcp,tcp6}. As this opens a security hole, the fix replaces socket pointer address with sockfd. Reported-by: Secunia Research <vuln@secunia.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

stub_send_ret_submit() handles urb with a potential null transfer_buffer, when it replays a packet with potential malicious data that could contain a null buffer. Add a check for the condition when actual_length > 0 and transfer_buffer is null. Reported-by: Secunia Research <vuln@secunia.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Avoid null pointer dereference if some function is walking through the devs array accessing members of a new virt_dev that is mid allocation. Add the virt_dev to xhci->devs[i] _after_ the virt_device and all its members are properly allocated. issue found by KASAN: null-ptr-deref in xhci_find_slot_id_by_port "Quick analysis suggests that xhci_alloc_virt_device() is not mutex protected. If so, there is a time frame where xhci->devs[slot_id] is set but not fully initialized. Specifically, xhci->devs[i]->udev can be NULL." Cc: stable <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

For MTK's xHCI 1.0 or latter, TD size is the number of max packet sized packets remaining in the TD, not including this TRB (following spec). For MTK's xHCI 0.96 and older, TD size is the number of max packet sized packets remaining in the TD, including this TRB (not following spec). Cc: stable <stable@vger.kernel.org> Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We were never releasing the initial fence reference that is obtained through dma_fence_init. Link: anholt/linux#122 Fixes: cdec4d3 ("drm/vc4: Expose dma-buf fences for V3D rendering.") Signed-off-by: Stefan Schake <stschake@gmail.com> Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/1512236444-301-1-git-send-email-stschake@gmail.com

These duplicate includes have been found with scripts/checkincludes.pl but they have been removed manually to avoid removing false positives. Signed-off-by: Pravin Shedge <pravin.shedge4linux@gmail.com> Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com> Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>

[ Upstream commit b313a8c ] Lockdep reported a warning in Linux version 6.6: [ 414.344659] ================================ [ 414.345155] WARNING: inconsistent lock state [ 414.345658] 6.6.0-07439-gba2303cacfda #6 Not tainted [ 414.346221] -------------------------------- [ 414.346712] inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. [ 414.347545] kworker/u10:3/1152 [HC0[0]:SC0[0]:HE0:SE1] takes: [ 414.349245] ffff88810edd1098 (&sbq->ws[i].wait){+.?.}-{2:2}, at: blk_mq_dispatch_rq_list+0x131c/0x1ee0 [ 414.351204] {IN-SOFTIRQ-W} state was registered at: [ 414.351751] lock_acquire+0x18d/0x460 [ 414.352218] _raw_spin_lock_irqsave+0x39/0x60 [ 414.352769] __wake_up_common_lock+0x22/0x60 [ 414.353289] sbitmap_queue_wake_up+0x375/0x4f0 [ 414.353829] sbitmap_queue_clear+0xdd/0x270 [ 414.354338] blk_mq_put_tag+0xdf/0x170 [ 414.354807] __blk_mq_free_request+0x381/0x4d0 [ 414.355335] blk_mq_free_request+0x28b/0x3e0 [ 414.355847] __blk_mq_end_request+0x242/0xc30 [ 414.356367] scsi_end_request+0x2c1/0x830 [ 414.345155] WARNING: inconsistent lock state [ 414.345658] 6.6.0-07439-gba2303cacfda #6 Not tainted [ 414.346221] -------------------------------- [ 414.346712] inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. [ 414.347545] kworker/u10:3/1152 [HC0[0]:SC0[0]:HE0:SE1] takes: [ 414.349245] ffff88810edd1098 (&sbq->ws[i].wait){+.?.}-{2:2}, at: blk_mq_dispatch_rq_list+0x131c/0x1ee0 [ 414.351204] {IN-SOFTIRQ-W} state was registered at: [ 414.351751] lock_acquire+0x18d/0x460 [ 414.352218] _raw_spin_lock_irqsave+0x39/0x60 [ 414.352769] __wake_up_common_lock+0x22/0x60 [ 414.353289] sbitmap_queue_wake_up+0x375/0x4f0 [ 414.353829] sbitmap_queue_clear+0xdd/0x270 [ 414.354338] blk_mq_put_tag+0xdf/0x170 [ 414.354807] __blk_mq_free_request+0x381/0x4d0 [ 414.355335] blk_mq_free_request+0x28b/0x3e0 [ 414.355847] __blk_mq_end_request+0x242/0xc30 [ 414.356367] scsi_end_request+0x2c1/0x830 [ 414.356863] scsi_io_completion+0x177/0x1610 [ 414.357379] scsi_complete+0x12f/0x260 [ 414.357856] blk_complete_reqs+0xba/0xf0 [ 414.358338] __do_softirq+0x1b0/0x7a2 [ 414.358796] irq_exit_rcu+0x14b/0x1a0 [ 414.359262] sysvec_call_function_single+0xaf/0xc0 [ 414.359828] asm_sysvec_call_function_single+0x1a/0x20 [ 414.360426] default_idle+0x1e/0x30 [ 414.360873] default_idle_call+0x9b/0x1f0 [ 414.361390] do_idle+0x2d2/0x3e0 [ 414.361819] cpu_startup_entry+0x55/0x60 [ 414.362314] start_secondary+0x235/0x2b0 [ 414.362809] secondary_startup_64_no_verify+0x18f/0x19b [ 414.363413] irq event stamp: 428794 [ 414.363825] hardirqs last enabled at (428793): [<ffffffff816bfd1c>] ktime_get+0x1dc/0x200 [ 414.364694] hardirqs last disabled at (428794): [<ffffffff85470177>] _raw_spin_lock_irq+0x47/0x50 [ 414.365629] softirqs last enabled at (428444): [<ffffffff85474780>] __do_softirq+0x540/0x7a2 [ 414.366522] softirqs last disabled at (428419): [<ffffffff813f65ab>] irq_exit_rcu+0x14b/0x1a0 [ 414.367425] other info that might help us debug this: [ 414.368194] Possible unsafe locking scenario: [ 414.368900] CPU0 [ 414.369225] ---- [ 414.369548] lock(&sbq->ws[i].wait); [ 414.370000] <Interrupt> [ 414.370342] lock(&sbq->ws[i].wait); [ 414.370802] *** DEADLOCK *** [ 414.371569] 5 locks held by kworker/u10:3/1152: [ 414.372088] #0: ffff88810130e938 ((wq_completion)writeback){+.+.}-{0:0}, at: process_scheduled_works+0x357/0x13f0 [ 414.373180] #1: ffff88810201fdb8 ((work_completion)(&(&wb->dwork)->work)){+.+.}-{0:0}, at: process_scheduled_works+0x3a3/0x13f0 [ 414.374384] #2: ffffffff86ffbdc0 (rcu_read_lock){....}-{1:2}, at: blk_mq_run_hw_queue+0x637/0xa00 [ 414.375342] #3: ffff88810edd1098 (&sbq->ws[i].wait){+.?.}-{2:2}, at: blk_mq_dispatch_rq_list+0x131c/0x1ee0 [ 414.376377] #4: ffff888106205a08 (&hctx->dispatch_wait_lock){+.-.}-{2:2}, at: blk_mq_dispatch_rq_list+0x1337/0x1ee0 [ 414.378607] stack backtrace: [ 414.379177] CPU: 0 PID: 1152 Comm: kworker/u10:3 Not tainted 6.6.0-07439-gba2303cacfda #6 [ 414.380032] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 414.381177] Workqueue: writeback wb_workfn (flush-253:0) [ 414.381805] Call Trace: [ 414.382136] <TASK> [ 414.382429] dump_stack_lvl+0x91/0xf0 [ 414.382884] mark_lock_irq+0xb3b/0x1260 [ 414.383367] ? __pfx_mark_lock_irq+0x10/0x10 [ 414.383889] ? stack_trace_save+0x8e/0xc0 [ 414.384373] ? __pfx_stack_trace_save+0x10/0x10 [ 414.384903] ? graph_lock+0xcf/0x410 [ 414.385350] ? save_trace+0x3d/0xc70 [ 414.385808] mark_lock.part.20+0x56d/0xa90 [ 414.386317] mark_held_locks+0xb0/0x110 [ 414.386791] ? __pfx_do_raw_spin_lock+0x10/0x10 [ 414.387320] lockdep_hardirqs_on_prepare+0x297/0x3f0 [ 414.387901] ? _raw_spin_unlock_irq+0x28/0x50 [ 414.388422] trace_hardirqs_on+0x58/0x100 [ 414.388917] _raw_spin_unlock_irq+0x28/0x50 [ 414.389422] __blk_mq_tag_busy+0x1d6/0x2a0 [ 414.389920] __blk_mq_get_driver_tag+0x761/0x9f0 [ 414.390899] blk_mq_dispatch_rq_list+0x1780/0x1ee0 [ 414.391473] ? __pfx_blk_mq_dispatch_rq_list+0x10/0x10 [ 414.392070] ? sbitmap_get+0x2b8/0x450 [ 414.392533] ? __blk_mq_get_driver_tag+0x210/0x9f0 [ 414.393095] __blk_mq_sched_dispatch_requests+0xd99/0x1690 [ 414.393730] ? elv_attempt_insert_merge+0x1b1/0x420 [ 414.394302] ? __pfx___blk_mq_sched_dispatch_requests+0x10/0x10 [ 414.394970] ? lock_acquire+0x18d/0x460 [ 414.395456] ? blk_mq_run_hw_queue+0x637/0xa00 [ 414.395986] ? __pfx_lock_acquire+0x10/0x10 [ 414.396499] blk_mq_sched_dispatch_requests+0x109/0x190 [ 414.397100] blk_mq_run_hw_queue+0x66e/0xa00 [ 414.397616] blk_mq_flush_plug_list.part.17+0x614/0x2030 [ 414.398244] ? __pfx_blk_mq_flush_plug_list.part.17+0x10/0x10 [ 414.398897] ? writeback_sb_inodes+0x241/0xcc0 [ 414.399429] blk_mq_flush_plug_list+0x65/0x80 [ 414.399957] __blk_flush_plug+0x2f1/0x530 [ 414.400458] ? __pfx___blk_flush_plug+0x10/0x10 [ 414.400999] blk_finish_plug+0x59/0xa0 [ 414.401467] wb_writeback+0x7cc/0x920 [ 414.401935] ? __pfx_wb_writeback+0x10/0x10 [ 414.402442] ? mark_held_locks+0xb0/0x110 [ 414.402931] ? __pfx_do_raw_spin_lock+0x10/0x10 [ 414.403462] ? lockdep_hardirqs_on_prepare+0x297/0x3f0 [ 414.404062] wb_workfn+0x2b3/0xcf0 [ 414.404500] ? __pfx_wb_workfn+0x10/0x10 [ 414.404989] process_scheduled_works+0x432/0x13f0 [ 414.405546] ? __pfx_process_scheduled_works+0x10/0x10 [ 414.406139] ? do_raw_spin_lock+0x101/0x2a0 [ 414.406641] ? assign_work+0x19b/0x240 [ 414.407106] ? lock_is_held_type+0x9d/0x110 [ 414.407604] worker_thread+0x6f2/0x1160 [ 414.408075] ? __kthread_parkme+0x62/0x210 [ 414.408572] ? lockdep_hardirqs_on_prepare+0x297/0x3f0 [ 414.409168] ? __kthread_parkme+0x13c/0x210 [ 414.409678] ? __pfx_worker_thread+0x10/0x10 [ 414.410191] kthread+0x33c/0x440 [ 414.410602] ? __pfx_kthread+0x10/0x10 [ 414.411068] ret_from_fork+0x4d/0x80 [ 414.411526] ? __pfx_kthread+0x10/0x10 [ 414.411993] ret_from_fork_asm+0x1b/0x30 [ 414.412489] </TASK> When interrupt is turned on while a lock holding by spin_lock_irq it throws a warning because of potential deadlock. blk_mq_prep_dispatch_rq blk_mq_get_driver_tag __blk_mq_get_driver_tag __blk_mq_alloc_driver_tag blk_mq_tag_busy -> tag is already busy // failed to get driver tag blk_mq_mark_tag_wait spin_lock_irq(&wq->lock) -> lock A (&sbq->ws[i].wait) __add_wait_queue(wq, wait) -> wait queue active blk_mq_get_driver_tag __blk_mq_tag_busy -> 1) tag must be idle, which means there can't be inflight IO spin_lock_irq(&tags->lock) -> lock B (hctx->tags) spin_unlock_irq(&tags->lock) -> unlock B, turn on interrupt accidentally -> 2) context must be preempt by IO interrupt to trigger deadlock. As shown above, the deadlock is not possible in theory, but the warning still need to be fixed. Fix it by using spin_lock_irqsave to get lockB instead of spin_lock_irq. Fixes: 4f1731d ("blk-mq: fix potential io hang by wrong 'wake_batch'") Signed-off-by: Li Lingfeng <lilingfeng3@huawei.com> Reviewed-by: Ming Lei <ming.lei@redhat.com> Reviewed-by: Yu Kuai <yukuai3@huawei.com> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Link: https://lore.kernel.org/r/20240815024736.2040971-1-lilingfeng@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit bd44ca3 ] Currently the dma debugging code can end up indirectly calling printk under the radix_lock. This happens when a radix tree node allocation fails. This is a problem because the printk code, when used together with netconsole, can end up inside the dma debugging code while trying to transmit a message over netcons. This creates the possibility of either a circular deadlock on the same CPU, with that CPU trying to grab the radix_lock twice, or an ABBA deadlock between different CPUs, where one CPU grabs the console lock first and then waits for the radix_lock, while the other CPU is holding the radix_lock and is waiting for the console lock. The trace captured by lockdep is of the ABBA variant. -> #2 (&dma_entry_hash[i].lock){-.-.}-{2:2}: _raw_spin_lock_irqsave+0x5a/0x90 debug_dma_map_page+0x79/0x180 dma_map_page_attrs+0x1d2/0x2f0 bnxt_start_xmit+0x8c6/0x1540 netpoll_start_xmit+0x13f/0x180 netpoll_send_skb+0x20d/0x320 netpoll_send_udp+0x453/0x4a0 write_ext_msg+0x1b9/0x460 console_flush_all+0x2ff/0x5a0 console_unlock+0x55/0x180 vprintk_emit+0x2e3/0x3c0 devkmsg_emit+0x5a/0x80 devkmsg_write+0xfd/0x180 do_iter_readv_writev+0x164/0x1b0 vfs_writev+0xf9/0x2b0 do_writev+0x6d/0x110 do_syscall_64+0x80/0x150 entry_SYSCALL_64_after_hwframe+0x4b/0x53 -> #0 (console_owner){-.-.}-{0:0}: __lock_acquire+0x15d1/0x31a0 lock_acquire+0xe8/0x290 console_flush_all+0x2ea/0x5a0 console_unlock+0x55/0x180 vprintk_emit+0x2e3/0x3c0 _printk+0x59/0x80 warn_alloc+0x122/0x1b0 __alloc_pages_slowpath+0x1101/0x1120 __alloc_pages+0x1eb/0x2c0 alloc_slab_page+0x5f/0x150 new_slab+0x2dc/0x4e0 ___slab_alloc+0xdcb/0x1390 kmem_cache_alloc+0x23d/0x360 radix_tree_node_alloc+0x3c/0xf0 radix_tree_insert+0xf5/0x230 add_dma_entry+0xe9/0x360 dma_map_page_attrs+0x1d2/0x2f0 __bnxt_alloc_rx_frag+0x147/0x180 bnxt_alloc_rx_data+0x79/0x160 bnxt_rx_skb+0x29/0xc0 bnxt_rx_pkt+0xe22/0x1570 __bnxt_poll_work+0x101/0x390 bnxt_poll+0x7e/0x320 __napi_poll+0x29/0x160 net_rx_action+0x1e0/0x3e0 handle_softirqs+0x190/0x510 run_ksoftirqd+0x4e/0x90 smpboot_thread_fn+0x1a8/0x270 kthread+0x102/0x120 ret_from_fork+0x2f/0x40 ret_from_fork_asm+0x11/0x20 This bug is more likely than it seems, because when one CPU has run out of memory, chances are the other has too. The good news is, this bug is hidden behind the CONFIG_DMA_API_DEBUG, so not many users are likely to trigger it. Signed-off-by: Rik van Riel <riel@surriel.com> Reported-by: Konstantin Ovsepian <ovs@meta.com> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 56f4526 ] This timer HW supports 8, 16 and 32-bit timer widths. This driver currently uses a u32 to store the max possible value of the timer. However, statements perform addition of 2 in xilinx_pwm_apply() when calculating the period_cycles and duty_cycles values. Since priv->max is a u32, this will result in an overflow to 1 which will not only be incorrect but fail on range comparison. This results in making it impossible to set the PWM in this timer mode. There are two obvious solutions to the current problem: 1. Cast each instance where overflow occurs to u64. 2. Change priv->max from a u32 to a u64. Solution #1 requires more code modifications, and leaves opportunity to introduce similar overflows if other math statements are added in the future. These may also go undetected if running in non 32-bit timer modes. Solution #2 is the much smaller and cleaner approach and thus the chosen method in this patch. This was tested on a Zynq UltraScale+ with multiple instances of the PWM IP. Signed-off-by: Ken Sloat <ksloat@designlinxhs.com> Reviewed-by: Michal Simek <michal.simek@amd.com> Reviewed-by: Sean Anderson <sean.anderson@seco.com> Link: https://lore.kernel.org/r/SJ0P222MB0107490C5371B848EF04351CA1E19@SJ0P222MB0107.NAMP222.PROD.OUTLOOK.COM Signed-off-by: Michal Simek <michal.simek@amd.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

@CFILE

commit f9c169b upstream. If smb2_compound_op() is called with a valid @CFILE and returned -EINVAL, we need to call cifs_get_writable_path() before retrying it as the reference of @CFILE was already dropped by previous call. This fixes the following KASAN splat when running fstests generic/013 against Windows Server 2022: CIFS: Attempting to mount //w22-fs0/scratch run fstests generic/013 at 2024-09-02 19:48:59 ================================================================== BUG: KASAN: slab-use-after-free in detach_if_pending+0xab/0x200 Write of size 8 at addr ffff88811f1a3730 by task kworker/3:2/176 CPU: 3 UID: 0 PID: 176 Comm: kworker/3:2 Not tainted 6.11.0-rc6 #2 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014 Workqueue: cifsoplockd cifs_oplock_break [cifs] Call Trace: <TASK> dump_stack_lvl+0x5d/0x80 ? detach_if_pending+0xab/0x200 print_report+0x156/0x4d9 ? detach_if_pending+0xab/0x200 ? __virt_addr_valid+0x145/0x300 ? __phys_addr+0x46/0x90 ? detach_if_pending+0xab/0x200 kasan_report+0xda/0x110 ? detach_if_pending+0xab/0x200 detach_if_pending+0xab/0x200 timer_delete+0x96/0xe0 ? __pfx_timer_delete+0x10/0x10 ? rcu_is_watching+0x20/0x50 try_to_grab_pending+0x46/0x3b0 __cancel_work+0x89/0x1b0 ? __pfx___cancel_work+0x10/0x10 ? kasan_save_track+0x14/0x30 cifs_close_deferred_file+0x110/0x2c0 [cifs] ? __pfx_cifs_close_deferred_file+0x10/0x10 [cifs] ? __pfx_down_read+0x10/0x10 cifs_oplock_break+0x4c1/0xa50 [cifs] ? __pfx_cifs_oplock_break+0x10/0x10 [cifs] ? lock_is_held_type+0x85/0xf0 ? mark_held_locks+0x1a/0x90 process_one_work+0x4c6/0x9f0 ? find_held_lock+0x8a/0xa0 ? __pfx_process_one_work+0x10/0x10 ? lock_acquired+0x220/0x550 ? __list_add_valid_or_report+0x37/0x100 worker_thread+0x2e4/0x570 ? __kthread_parkme+0xd1/0xf0 ? __pfx_worker_thread+0x10/0x10 kthread+0x17f/0x1c0 ? kthread+0xda/0x1c0 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x60 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> Allocated by task 1118: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 __kasan_kmalloc+0xaa/0xb0 cifs_new_fileinfo+0xc8/0x9d0 [cifs] cifs_atomic_open+0x467/0x770 [cifs] lookup_open.isra.0+0x665/0x8b0 path_openat+0x4c3/0x1380 do_filp_open+0x167/0x270 do_sys_openat2+0x129/0x160 __x64_sys_creat+0xad/0xe0 do_syscall_64+0xbb/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 83: kasan_save_stack+0x30/0x50 kasan_save_track+0x14/0x30 kasan_save_free_info+0x3b/0x70 poison_slab_object+0xe9/0x160 __kasan_slab_free+0x32/0x50 kfree+0xf2/0x300 process_one_work+0x4c6/0x9f0 worker_thread+0x2e4/0x570 kthread+0x17f/0x1c0 ret_from_fork+0x31/0x60 ret_from_fork_asm+0x1a/0x30 Last potentially related work creation: kasan_save_stack+0x30/0x50 __kasan_record_aux_stack+0xad/0xc0 insert_work+0x29/0xe0 __queue_work+0x5ea/0x760 queue_work_on+0x6d/0x90 _cifsFileInfo_put+0x3f6/0x770 [cifs] smb2_compound_op+0x911/0x3940 [cifs] smb2_set_path_size+0x228/0x270 [cifs] cifs_set_file_size+0x197/0x460 [cifs] cifs_setattr+0xd9c/0x14b0 [cifs] notify_change+0x4e3/0x740 do_truncate+0xfa/0x180 vfs_truncate+0x195/0x200 __x64_sys_truncate+0x109/0x150 do_syscall_64+0xbb/0x1d0 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fixes: 71f15c9 ("smb: client: retry compound request without reusing lease") Cc: stable@vger.kernel.org Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com> Cc: David Howells <dhowells@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d260327 upstream. Chi Zhiling reported: We found a null pointer accessing in tracefs[1], the reason is that the variable 'ei_child' is set to LIST_POISON1, that means the list was removed in eventfs_remove_rec. so when access the ei_child->is_freed, the panic triggered. by the way, the following script can reproduce this panic loop1 (){ while true do echo "p:kp submit_bio" > /sys/kernel/debug/tracing/kprobe_events echo "" > /sys/kernel/debug/tracing/kprobe_events done } loop2 (){ while true do tree /sys/kernel/debug/tracing/events/kprobes/ done } loop1 & loop2 [1]: [ 1147.959632][T17331] Unable to handle kernel paging request at virtual address dead000000000150 [ 1147.968239][T17331] Mem abort info: [ 1147.971739][T17331] ESR = 0x0000000096000004 [ 1147.976172][T17331] EC = 0x25: DABT (current EL), IL = 32 bits [ 1147.982171][T17331] SET = 0, FnV = 0 [ 1147.985906][T17331] EA = 0, S1PTW = 0 [ 1147.989734][T17331] FSC = 0x04: level 0 translation fault [ 1147.995292][T17331] Data abort info: [ 1147.998858][T17331] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 1148.005023][T17331] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 1148.010759][T17331] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 1148.016752][T17331] [dead000000000150] address between user and kernel address ranges [ 1148.024571][T17331] Internal error: Oops: 0000000096000004 [#1] SMP [ 1148.030825][T17331] Modules linked in: team_mode_loadbalance team nlmon act_gact cls_flower sch_ingress bonding tls macvlan dummy ib_core bridge stp llc veth amdgpu amdxcp mfd_core gpu_sched drm_exec drm_buddy radeon crct10dif_ce video drm_suballoc_helper ghash_ce drm_ttm_helper sha2_ce ttm sha256_arm64 i2c_algo_bit sha1_ce sbsa_gwdt cp210x drm_display_helper cec sr_mod cdrom drm_kms_helper binfmt_misc sg loop fuse drm dm_mod nfnetlink ip_tables autofs4 [last unloaded: tls] [ 1148.072808][T17331] CPU: 3 PID: 17331 Comm: ls Tainted: G W ------- ---- 6.6.43 #2 [ 1148.081751][T17331] Source Version: 21b3b386e948bedd29369af66f3e98ab01b1c650 [ 1148.088783][T17331] Hardware name: Greatwall GW-001M1A-FTF/GW-001M1A-FTF, BIOS KunLun BIOS V4.0 07/16/2020 [ 1148.098419][T17331] pstate: 20000005 (nzCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 1148.106060][T17331] pc : eventfs_iterate+0x2c0/0x398 [ 1148.111017][T17331] lr : eventfs_iterate+0x2fc/0x398 [ 1148.115969][T17331] sp : ffff80008d56bbd0 [ 1148.119964][T17331] x29: ffff80008d56bbf0 x28: ffff001ff5be2600 x27: 0000000000000000 [ 1148.127781][T17331] x26: ffff001ff52ca4e0 x25: 0000000000009977 x24: dead000000000100 [ 1148.135598][T17331] x23: 0000000000000000 x22: 000000000000000b x21: ffff800082645f10 [ 1148.143415][T17331] x20: ffff001fddf87c70 x19: ffff80008d56bc90 x18: 0000000000000000 [ 1148.151231][T17331] x17: 0000000000000000 x16: 0000000000000000 x15: ffff001ff52ca4e0 [ 1148.159048][T17331] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 1148.166864][T17331] x11: 0000000000000000 x10: 0000000000000000 x9 : ffff8000804391d0 [ 1148.174680][T17331] x8 : 0000000180000000 x7 : 0000000000000018 x6 : 0000aaab04b92862 [ 1148.182498][T17331] x5 : 0000aaab04b92862 x4 : 0000000080000000 x3 : 0000000000000068 [ 1148.190314][T17331] x2 : 000000000000000f x1 : 0000000000007ea8 x0 : 0000000000000001 [ 1148.198131][T17331] Call trace: [ 1148.201259][T17331] eventfs_iterate+0x2c0/0x398 [ 1148.205864][T17331] iterate_dir+0x98/0x188 [ 1148.210036][T17331] __arm64_sys_getdents64+0x78/0x160 [ 1148.215161][T17331] invoke_syscall+0x78/0x108 [ 1148.219593][T17331] el0_svc_common.constprop.0+0x48/0xf0 [ 1148.224977][T17331] do_el0_svc+0x24/0x38 [ 1148.228974][T17331] el0_svc+0x40/0x168 [ 1148.232798][T17331] el0t_64_sync_handler+0x120/0x130 [ 1148.237836][T17331] el0t_64_sync+0x1a4/0x1a8 [ 1148.242182][T17331] Code: 54ffff6c f9400676 910006d6 f9000676 (b9405300) [ 1148.248955][T17331] ---[ end trace 0000000000000000 ]--- The issue is that list_del() is used on an SRCU protected list variable before the synchronization occurs. This can poison the list pointers while there is a reader iterating the list. This is simply fixed by using list_del_rcu() that is specifically made for this purpose. Link: https://lore.kernel.org/linux-trace-kernel/20240829085025.3600021-1-chizhiling@163.com/ Cc: stable@vger.kernel.org Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Link: https://lore.kernel.org/20240904131605.640d42b1@gandalf.local.home Fixes: 43aa6f9 ("eventfs: Get rid of dentry pointers without refcounts") Reported-by: Chi Zhiling <chizhiling@kylinos.cn> Tested-by: Chi Zhiling <chizhiling@kylinos.cn> Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit c68bbf5 ] This adds a check before freeing the rx->skb in flush and close functions to handle the kernel crash seen while removing driver after FW download fails or before FW download completes. dmesg log: [ 54.634586] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000080 [ 54.643398] Mem abort info: [ 54.646204] ESR = 0x0000000096000004 [ 54.649964] EC = 0x25: DABT (current EL), IL = 32 bits [ 54.655286] SET = 0, FnV = 0 [ 54.658348] EA = 0, S1PTW = 0 [ 54.661498] FSC = 0x04: level 0 translation fault [ 54.666391] Data abort info: [ 54.669273] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 54.674768] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 54.674771] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 54.674775] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000048860000 [ 54.674780] [0000000000000080] pgd=0000000000000000, p4d=0000000000000000 [ 54.703880] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 54.710152] Modules linked in: btnxpuart(-) overlay fsl_jr_uio caam_jr caamkeyblob_desc caamhash_desc caamalg_desc crypto_engine authenc libdes crct10dif_ce polyval_ce polyval_generic snd_soc_imx_spdif snd_soc_imx_card snd_soc_ak5558 snd_soc_ak4458 caam secvio error snd_soc_fsl_micfil snd_soc_fsl_spdif snd_soc_fsl_sai snd_soc_fsl_utils imx_pcm_dma gpio_ir_recv rc_core sch_fq_codel fuse [ 54.744357] CPU: 3 PID: 72 Comm: kworker/u9:0 Not tainted 6.6.3-otbr-g128004619037 #2 [ 54.744364] Hardware name: FSL i.MX8MM EVK board (DT) [ 54.744368] Workqueue: hci0 hci_power_on [ 54.757244] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 54.757249] pc : kfree_skb_reason+0x18/0xb0 [ 54.772299] lr : btnxpuart_flush+0x40/0x58 [btnxpuart] [ 54.782921] sp : ffff8000805ebca0 [ 54.782923] x29: ffff8000805ebca0 x28: ffffa5c6cf1869c0 x27: ffffa5c6cf186000 [ 54.782931] x26: ffff377b84852400 x25: ffff377b848523c0 x24: ffff377b845e7230 [ 54.782938] x23: ffffa5c6ce8dbe08 x22: ffffa5c6ceb65410 x21: 00000000ffffff92 [ 54.782945] x20: ffffa5c6ce8dbe98 x19: ffffffffffffffac x18: ffffffffffffffff [ 54.807651] x17: 0000000000000000 x16: ffffa5c6ce2824ec x15: ffff8001005eb857 [ 54.821917] x14: 0000000000000000 x13: ffffa5c6cf1a02e0 x12: 0000000000000642 [ 54.821924] x11: 0000000000000040 x10: ffffa5c6cf19d690 x9 : ffffa5c6cf19d688 [ 54.821931] x8 : ffff377b86000028 x7 : 0000000000000000 x6 : 0000000000000000 [ 54.821938] x5 : ffff377b86000000 x4 : 0000000000000000 x3 : 0000000000000000 [ 54.843331] x2 : 0000000000000000 x1 : 0000000000000002 x0 : ffffffffffffffac [ 54.857599] Call trace: [ 54.857601] kfree_skb_reason+0x18/0xb0 [ 54.863878] btnxpuart_flush+0x40/0x58 [btnxpuart] [ 54.863888] hci_dev_open_sync+0x3a8/0xa04 [ 54.872773] hci_power_on+0x54/0x2e4 [ 54.881832] process_one_work+0x138/0x260 [ 54.881842] worker_thread+0x32c/0x438 [ 54.881847] kthread+0x118/0x11c [ 54.881853] ret_from_fork+0x10/0x20 [ 54.896406] Code: a9be7bfd 910003fd f9000bf3 aa0003f3 (b940d400) [ 54.896410] ---[ end trace 0000000000000000 ]--- Signed-off-by: Neeraj Sanjay Kale <neeraj.sanjaykale@nxp.com> Tested-by: Guillaume Legoupil <guillaume.legoupil@nxp.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit c3a5e3e ] When using cachefiles, lockdep may emit something similar to the circular locking dependency notice below. The problem appears to stem from the following: (1) Cachefiles manipulates xattrs on the files in its cache when called from ->writepages(). (2) The setxattr() and removexattr() system call handlers get the name (and value) from userspace after taking the sb_writers lock, putting accesses of the vma->vm_lock and mm->mmap_lock inside of that. (3) The afs filesystem uses a per-inode lock to prevent multiple revalidation RPCs and in writeback vs truncate to prevent parallel operations from deadlocking against the server on one side and local page locks on the other. Fix this by moving the getting of the name and value in {get,remove}xattr() outside of the sb_writers lock. This also has the minor benefits that we don't need to reget these in the event of a retry and we never try to take the sb_writers lock in the event we can't pull the name and value into the kernel. Alternative approaches that might fix this include moving the dispatch of a write to the cache off to a workqueue or trying to do without the validation lock in afs. Note that this might also affect other filesystems that use netfslib and/or cachefiles. ====================================================== WARNING: possible circular locking dependency detected 6.10.0-build2+ #956 Not tainted ------------------------------------------------------ fsstress/6050 is trying to acquire lock: ffff888138fd82f0 (mapping.invalidate_lock#3){++++}-{3:3}, at: filemap_fault+0x26e/0x8b0 but task is already holding lock: ffff888113f26d18 (&vma->vm_lock->lock){++++}-{3:3}, at: lock_vma_under_rcu+0x165/0x250 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #4 (&vma->vm_lock->lock){++++}-{3:3}: __lock_acquire+0xaf0/0xd80 lock_acquire.part.0+0x103/0x280 down_write+0x3b/0x50 vma_start_write+0x6b/0xa0 vma_link+0xcc/0x140 insert_vm_struct+0xb7/0xf0 alloc_bprm+0x2c1/0x390 kernel_execve+0x65/0x1a0 call_usermodehelper_exec_async+0x14d/0x190 ret_from_fork+0x24/0x40 ret_from_fork_asm+0x1a/0x30 -> #3 (&mm->mmap_lock){++++}-{3:3}: __lock_acquire+0xaf0/0xd80 lock_acquire.part.0+0x103/0x280 __might_fault+0x7c/0xb0 strncpy_from_user+0x25/0x160 removexattr+0x7f/0x100 __do_sys_fremovexattr+0x7e/0xb0 do_syscall_64+0x9f/0x100 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #2 (sb_writers#14){.+.+}-{0:0}: __lock_acquire+0xaf0/0xd80 lock_acquire.part.0+0x103/0x280 percpu_down_read+0x3c/0x90 vfs_iocb_iter_write+0xe9/0x1d0 __cachefiles_write+0x367/0x430 cachefiles_issue_write+0x299/0x2f0 netfs_advance_write+0x117/0x140 netfs_write_folio.isra.0+0x5ca/0x6e0 netfs_writepages+0x230/0x2f0 afs_writepages+0x4d/0x70 do_writepages+0x1e8/0x3e0 filemap_fdatawrite_wbc+0x84/0xa0 __filemap_fdatawrite_range+0xa8/0xf0 file_write_and_wait_range+0x59/0x90 afs_release+0x10f/0x270 __fput+0x25f/0x3d0 __do_sys_close+0x43/0x70 do_syscall_64+0x9f/0x100 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #1 (&vnode->validate_lock){++++}-{3:3}: __lock_acquire+0xaf0/0xd80 lock_acquire.part.0+0x103/0x280 down_read+0x95/0x200 afs_writepages+0x37/0x70 do_writepages+0x1e8/0x3e0 filemap_fdatawrite_wbc+0x84/0xa0 filemap_invalidate_inode+0x167/0x1e0 netfs_unbuffered_write_iter+0x1bd/0x2d0 vfs_write+0x22e/0x320 ksys_write+0xbc/0x130 do_syscall_64+0x9f/0x100 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #0 (mapping.invalidate_lock#3){++++}-{3:3}: check_noncircular+0x119/0x160 check_prev_add+0x195/0x430 __lock_acquire+0xaf0/0xd80 lock_acquire.part.0+0x103/0x280 down_read+0x95/0x200 filemap_fault+0x26e/0x8b0 __do_fault+0x57/0xd0 do_pte_missing+0x23b/0x320 __handle_mm_fault+0x2d4/0x320 handle_mm_fault+0x14f/0x260 do_user_addr_fault+0x2a2/0x500 exc_page_fault+0x71/0x90 asm_exc_page_fault+0x22/0x30 other info that might help us debug this: Chain exists of: mapping.invalidate_lock#3 --> &mm->mmap_lock --> &vma->vm_lock->lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- rlock(&vma->vm_lock->lock); lock(&mm->mmap_lock); lock(&vma->vm_lock->lock); rlock(mapping.invalidate_lock#3); *** DEADLOCK *** 1 lock held by fsstress/6050: #0: ffff888113f26d18 (&vma->vm_lock->lock){++++}-{3:3}, at: lock_vma_under_rcu+0x165/0x250 stack backtrace: CPU: 0 PID: 6050 Comm: fsstress Not tainted 6.10.0-build2+ #956 Hardware name: ASUS All Series/H97-PLUS, BIOS 2306 10/09/2014 Call Trace: <TASK> dump_stack_lvl+0x57/0x80 check_noncircular+0x119/0x160 ? queued_spin_lock_slowpath+0x4be/0x510 ? __pfx_check_noncircular+0x10/0x10 ? __pfx_queued_spin_lock_slowpath+0x10/0x10 ? mark_lock+0x47/0x160 ? init_chain_block+0x9c/0xc0 ? add_chain_block+0x84/0xf0 check_prev_add+0x195/0x430 __lock_acquire+0xaf0/0xd80 ? __pfx___lock_acquire+0x10/0x10 ? __lock_release.isra.0+0x13b/0x230 lock_acquire.part.0+0x103/0x280 ? filemap_fault+0x26e/0x8b0 ? __pfx_lock_acquire.part.0+0x10/0x10 ? rcu_is_watching+0x34/0x60 ? lock_acquire+0xd7/0x120 down_read+0x95/0x200 ? filemap_fault+0x26e/0x8b0 ? __pfx_down_read+0x10/0x10 ? __filemap_get_folio+0x25/0x1a0 filemap_fault+0x26e/0x8b0 ? __pfx_filemap_fault+0x10/0x10 ? find_held_lock+0x7c/0x90 ? __pfx___lock_release.isra.0+0x10/0x10 ? __pte_offset_map+0x99/0x110 __do_fault+0x57/0xd0 do_pte_missing+0x23b/0x320 __handle_mm_fault+0x2d4/0x320 ? __pfx___handle_mm_fault+0x10/0x10 handle_mm_fault+0x14f/0x260 do_user_addr_fault+0x2a2/0x500 exc_page_fault+0x71/0x90 asm_exc_page_fault+0x22/0x30 Signed-off-by: David Howells <dhowells@redhat.com> Link: https://lore.kernel.org/r/2136178.1721725194@warthog.procyon.org.uk cc: Alexander Viro <viro@zeniv.linux.org.uk> cc: Christian Brauner <brauner@kernel.org> cc: Jan Kara <jack@suse.cz> cc: Jeff Layton <jlayton@kernel.org> cc: Gao Xiang <xiang@kernel.org> cc: Matthew Wilcox <willy@infradead.org> cc: netfs@lists.linux.dev cc: linux-erofs@lists.ozlabs.org cc: linux-fsdevel@vger.kernel.org [brauner: fix minor issues] Signed-off-by: Christian Brauner <brauner@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

…-level' Eduard Zingerman says: ==================== bpf: track find_equal_scalars history on per-instruction level This is a fix for precision tracking bug reported in [0]. It supersedes my previous attempt to fix similar issue in commit [1]. Here is a minimized test case from [0]: 0: call bpf_get_prandom_u32; 1: r7 = r0; 2: r8 = r0; 3: call bpf_get_prandom_u32; 4: if r0 > 1 goto +0; /* --- checkpoint #1: r7.id=1, r8.id=1 --- */ 5: if r8 >= r0 goto 9f; 6: r8 += r8; /* --- checkpoint #2: r7.id=1, r8.id=0 --- */ 7: if r7 == 0 goto 9f; 8: r0 /= 0; /* --- checkpoint #3 --- */ 9: r0 = 42; 10: exit; W/o this fix verifier incorrectly assumes that instruction at label (8) is unreachable. The issue is caused by failure to infer precision mark for r0 at checkpoint #1: - first verification path is: - (0-4): r0 range [0,1]; - (5): r8 range [0,0], propagated to r7; - (6): r8.id is reset; - (7): jump is predicted to happen; - (9-10): safe exit. - when jump at (7) is predicted mark_chain_precision() for r7 is called and backtrack_insn() proceeds as follows: - at (7) r7 is marked as precise; - at (5) r8 is not currently tracked and thus r0 is not marked; - at (4-5) boundary logic from [1] is triggered and r7,r8 are marked as precise; - => r0 precision mark is missed. - when second branch of (4) is considered, verifier prunes the state because r0 is not marked as precise in the visited state. Basically, backtracking logic fails to notice that at (5) range information is gained for both r7 and r8, and thus both r8 and r0 have to be marked as precise. This happens because [1] can only account for such range transfers at parent/child state boundaries. The solution suggested by Andrii Nakryiko in [0] is to use jump history to remember which registers gained range as a result of find_equal_scalars() [renamed to sync_linked_regs()] and use this information in backtrack_insn(). Which is what this patch-set does. The patch-set uses u64 value as a vector of 10-bit values that identify registers gaining range in find_equal_scalars(). This amounts to maximum of 6 possible values. To check if such capacity is sufficient I've instrumented kernel to track a histogram for maximal amount of registers that gain range in find_equal_scalars per program verification [2]. Measurements done for verifier selftests and Cilium bpf object files from [3] show that number of such registers is *always* <= 4 and in 98% of cases it is <= 2. When tested on a subset of selftests identified by selftests/bpf/veristat.cfg and Cilium bpf object files from [3] this patch-set has minimal verification performance impact: File Program Insns (DIFF) States (DIFF) ------------------------ ------------------------ -------------- ------------- bpf_host.o tail_handle_nat_fwd_ipv4 -75 (-0.61%) -3 (-0.39%) pyperf600_nounroll.bpf.o on_event +1673 (+0.33%) +3 (+0.01%) [0] https://lore.kernel.org/bpf/CAEf4BzZ0xidVCqB47XnkXcNhkPWF6_nTV7yt+_Lf0kcFEut2Mg@mail.gmail.com/ [1] commit 904e6dd ("bpf: Use scalar ids in mark_chain_precision()") [2] https://github.com/eddyz87/bpf/tree/find-equal-scalars-in-jump-history-with-stats [3] https://github.com/anakryiko/cilium Changes: - v2 -> v3: A number of stylistic changes suggested by Andrii: - renamings: - struct reg_or_spill -> linked_reg; - find_equal_scalars() -> collect_linked_regs; - copy_known_reg() -> sync_linked_regs; - collect_linked_regs() now returns linked regs set of size 2 or larger; - dropped usage of bit fields in struct linked_reg; - added a patch changing references to find_equal_scalars() in selftests comments. - v1 -> v2: - patch "bpf: replace env->cur_hist_ent with a getter function" is dropped (Andrii); - added structure linked_regs and helper functions to [de]serialize u64 value as such structure (Andrii); - bt_set_equal_scalars() renamed to bt_sync_linked_regs(), moved to start and end of backtrack_insn() in order to untie linked register logic from conditional jumps backtracking. Andrii requested a more radical change of moving linked registers processing to bt_set_xxx() functions, I did an experiment in this direction: https://github.com/eddyz87/bpf/tree/find-equal-scalars-in-jump-history--linked-regs-in-bt-set-reg the end result of the experiment seems much uglier than version presented in v2. Revisions: - v1: https://lore.kernel.org/bpf/20240222005005.31784-1-eddyz87@gmail.com/ - v2: https://lore.kernel.org/bpf/20240705205851.2635794-1-eddyz87@gmail.com/ ==================== Link: https://lore.kernel.org/r/20240718202357.1746514-1-eddyz87@gmail.com Signed-off-by: Andrii Nakryiko <andrii@kernel.org>

Leak sanitizer will report memory leaks from python and the leak sanitizer output causes tests to fail. For example: ``` $ perf test 98 -v 98: perf script tests: --- start --- test child forked, pid 1272962 DB test [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.046 MB /tmp/perf-test-script.x0EktdCel8/perf.data (8 samples) ] call_path_table((1, 0, 0, 0) call_path_table((2, 1, 0, 140339508617447) call_path_table((3, 2, 2, 0) call_path_table((4, 3, 3, 0) call_path_table((5, 4, 4, 0) call_path_table((6, 5, 5, 0) call_path_table((7, 6, 6, 0) call_path_table((8, 7, 7, 0) call_path_table((9, 8, 8, 0) call_path_table((10, 9, 9, 0) call_path_table((11, 10, 10, 0) call_path_table((12, 11, 11, 0) call_path_table((13, 12, 1, 0) sample_table((1, 1, 1, 1, 1, 1, 1, 8, -2058824120, 588306954119000, -1, 0, 0, 0, 0, 1, 0, 0, 128933429281, 0, 0, 13, 0, 0, 0, -1, -1)) sample_table((2, 1, 1, 1, 1, 1, 1, 8, -2058824120, 588306954137053, -1, 0, 0, 0, 0, 1, 0, 0, 128933429281, 0, 0, 13, 0, 0, 0, -1, -1)) sample_table((3, 1, 1, 1, 1, 1, 1, 8, -2058824120, 588306954140089, -1, 0, 0, 0, 0, 9, 0, 0, 128933429281, 0, 0, 13, 0, 0, 0, -1, -1)) sample_table((4, 1, 1, 1, 1, 1, 1, 8, -2058824120, 588306954142376, -1, 0, 0, 0, 0, 155, 0, 0, 128933429281, 0, 0, 13, 0, 0, 0, -1, -1)) sample_table((5, 1, 1, 1, 1, 1, 1, 8, -2058824120, 588306954144045, -1, 0, 0, 0, 0, 2493, 0, 0, 128933429281, 0, 0, 13, 0, 0, 0, -1, -1)) sample_table((6, 1, 1, 1, 1, 1, 12, 77, -2046828595, 588306954145722, -1, 0, 0, 0, 0, 47555, 0, 0, 128933429281, 0, 0, 13, 0, 0, 0, -1, -1)) call_path_table((14, 9, 14, 0) call_path_table((15, 14, 15, 0) call_path_table((16, 15, 0, -1040969624) call_path_table((17, 16, 16, 0) call_path_table((18, 17, 17, 0) call_path_table((19, 18, 18, 0) call_path_table((20, 19, 19, 0) call_path_table((21, 20, 13, 0) sample_table((7, 1, 1, 1, 2, 1, 13, 46, -2053700898, 588306954157436, -1, 0, 0, 0, 0, 964078, 0, 0, 128933429281, 0, 0, 21, 0, 0, 0, -1, -1)) call_path_table((22, 1, 21, 0) call_path_table((23, 22, 22, 0) call_path_table((24, 23, 23, 0) call_path_table((25, 24, 24, 0) call_path_table((26, 25, 25, 0) call_path_table((27, 26, 26, 0) call_path_table((28, 27, 27, 0) call_path_table((29, 28, 28, 0) call_path_table((30, 29, 29, 0) call_path_table((31, 30, 30, 0) call_path_table((32, 31, 31, 0) call_path_table((33, 32, 32, 0) call_path_table((34, 33, 33, 0) call_path_table((35, 34, 20, 0) sample_table((8, 1, 1, 1, 2, 1, 20, 49, -2046878127, 588306954378624, -1, 0, 0, 0, 0, 2534317, 0, 0, 128933429281, 0, 0, 35, 0, 0, 0, -1, -1)) ================================================================= ==1272975==ERROR: LeakSanitizer: detected memory leaks Direct leak of 13628 byte(s) in 6 object(s) allocated from: #0 0x56354f60c092 in malloc (/tmp/perf/perf+0x29c092) #1 0x7ff25c7d02e7 in _PyObject_Malloc /build/python3.11/../Objects/obmalloc.c:2003:11 #2 0x7ff25c7d02e7 in _PyObject_Malloc /build/python3.11/../Objects/obmalloc.c:1996:1 SUMMARY: AddressSanitizer: 13628 byte(s) leaked in 6 allocation(s). --- Cleaning up --- ---- end(-1) ---- 98: perf script tests : FAILED! ``` Disable leak sanitizer when running specific perf+python tests to avoid this. This causes the tests to pass when run with leak sanitizer. Reviewed-by: Aditya Gupta <adityag@linux.ibm.com> Signed-off-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Richter <tmricht@linux.ibm.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

iter_finish_branch_entry() doesn't put the branch_info from/to map elements creating memory leaks. This can be seen with: ``` $ perf record -e cycles -b perf test -w noploop $ perf report -D ... Direct leak of 984344 byte(s) in 123043 object(s) allocated from: #0 0x7fb2654f3bd7 in malloc libsanitizer/asan/asan_malloc_linux.cpp:69 #1 0x564d3400d10b in map__get util/map.h:186 #2 0x564d3400d10b in ip__resolve_ams util/machine.c:1981 #3 0x564d34014d81 in sample__resolve_bstack util/machine.c:2151 #4 0x564d34094790 in iter_prepare_branch_entry util/hist.c:898 #5 0x564d34098fa4 in hist_entry_iter__add util/hist.c:1238 #6 0x564d33d1f0c7 in process_sample_event tools/perf/builtin-report.c:334 #7 0x564d34031eb7 in perf_session__deliver_event util/session.c:1655 #8 0x564d3403ba52 in do_flush util/ordered-events.c:245 #9 0x564d3403ba52 in __ordered_events__flush util/ordered-events.c:324 #10 0x564d3402d32e in perf_session__process_user_event util/session.c:1708 #11 0x564d34032480 in perf_session__process_event util/session.c:1877 #12 0x564d340336ad in reader__read_event util/session.c:2399 #13 0x564d34033fdc in reader__process_events util/session.c:2448 #14 0x564d34033fdc in __perf_session__process_events util/session.c:2495 #15 0x564d34033fdc in perf_session__process_events util/session.c:2661 #16 0x564d33d27113 in __cmd_report tools/perf/builtin-report.c:1065 #17 0x564d33d27113 in cmd_report tools/perf/builtin-report.c:1805 #18 0x564d33e0ccb7 in run_builtin tools/perf/perf.c:350 #19 0x564d33e0d45e in handle_internal_command tools/perf/perf.c:403 #20 0x564d33cdd827 in run_argv tools/perf/perf.c:447 #21 0x564d33cdd827 in main tools/perf/perf.c:561 ... ``` Clearing up the map_symbols properly creates maps reference count issues so resolve those. Resolving this issue doesn't improve peak heap consumption for the test above. Committer testing: $ sudo dnf install libasan $ make -k CORESIGHT=1 EXTRA_CFLAGS="-fsanitize=address" CC=clang O=/tmp/build/$(basename $PWD)/ -C tools/perf install-bin Reviewed-by: Kan Liang <kan.liang@linux.intel.com> Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sun Haiyong <sunhaiyong@loongson.cn> Cc: Yanteng Si <siyanteng@loongson.cn> Link: https://lore.kernel.org/r/20240807065136.1039977-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

AddressSanitizer found a use-after-free bug in the symbol code which manifested as 'perf top' segfaulting. ==1238389==ERROR: AddressSanitizer: heap-use-after-free on address 0x60b00c48844b at pc 0x5650d8035961 bp 0x7f751aaecc90 sp 0x7f751aaecc80 READ of size 1 at 0x60b00c48844b thread T193 #0 0x5650d8035960 in _sort__sym_cmp util/sort.c:310 #1 0x5650d8043744 in hist_entry__cmp util/hist.c:1286 #2 0x5650d8043951 in hists__findnew_entry util/hist.c:614 #3 0x5650d804568f in __hists__add_entry util/hist.c:754 #4 0x5650d8045bf9 in hists__add_entry util/hist.c:772 #5 0x5650d8045df1 in iter_add_single_normal_entry util/hist.c:997 #6 0x5650d8043326 in hist_entry_iter__add util/hist.c:1242 #7 0x5650d7ceeefe in perf_event__process_sample /home/matt/src/linux/tools/perf/builtin-top.c:845 #8 0x5650d7ceeefe in deliver_event /home/matt/src/linux/tools/perf/builtin-top.c:1208 #9 0x5650d7fdb51b in do_flush util/ordered-events.c:245 #10 0x5650d7fdb51b in __ordered_events__flush util/ordered-events.c:324 #11 0x5650d7ced743 in process_thread /home/matt/src/linux/tools/perf/builtin-top.c:1120 #12 0x7f757ef1f133 in start_thread nptl/pthread_create.c:442 #13 0x7f757ef9f7db in clone3 ../sysdeps/unix/sysv/linux/x86_64/clone3.S:81 When updating hist maps it's also necessary to update the hist symbol reference because the old one gets freed in map__put(). While this bug was probably introduced with 5c24b67 ("perf tools: Replace map->referenced & maps->removed_maps with map->refcnt"), the symbol objects were leaked until c087e94 ("perf machine: Fix refcount usage when processing PERF_RECORD_KSYMBOL") was merged so the bug was masked. Fixes: c087e94 ("perf machine: Fix refcount usage when processing PERF_RECORD_KSYMBOL") Reported-by: Yunzhao Li <yunzhao@cloudflare.com> Signed-off-by: Matt Fleming (Cloudflare) <matt@readmodwrite.com> Cc: Ian Rogers <irogers@google.com> Cc: kernel-team@cloudflare.com Cc: Namhyung Kim <namhyung@kernel.org> Cc: Riccardo Mancini <rickyman7@gmail.com> Cc: stable@vger.kernel.org # v5.13+ Link: https://lore.kernel.org/r/20240815142212.3834625-1-matt@readmodwrite.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Eduard Zingerman says: ==================== __jited test tag to check disassembly after jit Some of the logic in the BPF jits might be non-trivial. It might be useful to allow testing this logic by comparing generated native code with expected code template. This patch set adds a macro __jited() that could be used for test_loader based tests in a following manner: SEC("tp") __arch_x86_64 __jited(" endbr64") __jited(" nopl (%rax,%rax)") __jited(" xorq %rax, %rax") ... __naked void some_test(void) { ... } Also add a test for jit code generated for tail calls handling to demonstrate the feature. The feature uses LLVM libraries to do the disassembly. At selftests compilation time Makefile detects if these libraries are available. When libraries are not available tests using __jit_x86() are skipped. Current CI environment does not include llvm development libraries, but changes to add these are trivial. This was previously discussed here: https://lore.kernel.org/bpf/20240718205158.3651529-1-yonghong.song@linux.dev/ Patch-set includes a few auxiliary steps: - patches #2 and #3 fix a few bugs in test_loader behaviour; - patch #4 replaces __regex macro with ability to specify regular expressions in __msg and __xlated using "{{" "}}" escapes; - patch #8 updates __xlated to match disassembly lines consequently, same way as __jited does. Changes v2->v3: - changed macro name from __jit_x86 to __jited with __arch_* to specify disassembly arch (Yonghong); - __jited matches disassembly lines consequently with "..." allowing to skip some number of lines (Andrii); - __xlated matches disassembly lines consequently, same as __jited; - "{{...}}" regex brackets instead of __regex macro; - bug fixes for old commits. Changes v1->v2: - stylistic changes suggested by Yonghong; - fix for -Wformat-truncation related warning when compiled with llvm15 (Yonghong). v1: https://lore.kernel.org/bpf/20240809010518.1137758-1-eddyz87@gmail.com/ v2: https://lore.kernel.org/bpf/20240815205449.242556-1-eddyz87@gmail.com/ ==================== Link: https://lore.kernel.org/r/20240820102357.3372779-1-eddyz87@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Add nested locking with I_MUTEX_XATTR subclass to avoid lockdep warning while handling xattr inode on file open syscall at ext4_xattr_inode_iget. Backtrace EXT4-fs (loop0): Ignoring removed oldalloc option ====================================================== WARNING: possible circular locking dependency detected 5.10.0-syzkaller #0 Not tainted ------------------------------------------------------ syz-executor543/2794 is trying to acquire lock: ffff8880215e1a48 (&ea_inode->i_rwsem#7/1){+.+.}-{3:3}, at: inode_lock include/linux/fs.h:782 [inline] ffff8880215e1a48 (&ea_inode->i_rwsem#7/1){+.+.}-{3:3}, at: ext4_xattr_inode_iget+0x42a/0x5c0 fs/ext4/xattr.c:425 but task is already holding lock: ffff8880215e3278 (&ei->i_data_sem/3){++++}-{3:3}, at: ext4_setattr+0x136d/0x19c0 fs/ext4/inode.c:5559 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&ei->i_data_sem/3){++++}-{3:3}: lock_acquire+0x197/0x480 kernel/locking/lockdep.c:5566 down_write+0x93/0x180 kernel/locking/rwsem.c:1564 ext4_update_i_disksize fs/ext4/ext4.h:3267 [inline] ext4_xattr_inode_write fs/ext4/xattr.c:1390 [inline] ext4_xattr_inode_lookup_create fs/ext4/xattr.c:1538 [inline] ext4_xattr_set_entry+0x331a/0x3d80 fs/ext4/xattr.c:1662 ext4_xattr_ibody_set+0x124/0x390 fs/ext4/xattr.c:2228 ext4_xattr_set_handle+0xc27/0x14e0 fs/ext4/xattr.c:2385 ext4_xattr_set+0x219/0x390 fs/ext4/xattr.c:2498 ext4_xattr_user_set+0xc9/0xf0 fs/ext4/xattr_user.c:40 __vfs_setxattr+0x404/0x450 fs/xattr.c:177 __vfs_setxattr_noperm+0x11d/0x4f0 fs/xattr.c:208 __vfs_setxattr_locked+0x1f9/0x210 fs/xattr.c:266 vfs_setxattr+0x112/0x2c0 fs/xattr.c:283 setxattr+0x1db/0x3e0 fs/xattr.c:548 path_setxattr+0x15a/0x240 fs/xattr.c:567 __do_sys_setxattr fs/xattr.c:582 [inline] __se_sys_setxattr fs/xattr.c:578 [inline] __x64_sys_setxattr+0xc5/0xe0 fs/xattr.c:578 do_syscall_64+0x6d/0xa0 arch/x86/entry/common.c:62 entry_SYSCALL_64_after_hwframe+0x61/0xcb -> #0 (&ea_inode->i_rwsem#7/1){+.+.}-{3:3}: check_prev_add kernel/locking/lockdep.c:2988 [inline] check_prevs_add kernel/locking/lockdep.c:3113 [inline] validate_chain+0x1695/0x58f0 kernel/locking/lockdep.c:3729 __lock_acquire+0x12fd/0x20d0 kernel/locking/lockdep.c:4955 lock_acquire+0x197/0x480 kernel/locking/lockdep.c:5566 down_write+0x93/0x180 kernel/locking/rwsem.c:1564 inode_lock include/linux/fs.h:782 [inline] ext4_xattr_inode_iget+0x42a/0x5c0 fs/ext4/xattr.c:425 ext4_xattr_inode_get+0x138/0x410 fs/ext4/xattr.c:485 ext4_xattr_move_to_block fs/ext4/xattr.c:2580 [inline] ext4_xattr_make_inode_space fs/ext4/xattr.c:2682 [inline] ext4_expand_extra_isize_ea+0xe70/0x1bb0 fs/ext4/xattr.c:2774 __ext4_expand_extra_isize+0x304/0x3f0 fs/ext4/inode.c:5898 ext4_try_to_expand_extra_isize fs/ext4/inode.c:5941 [inline] __ext4_mark_inode_dirty+0x591/0x810 fs/ext4/inode.c:6018 ext4_setattr+0x1400/0x19c0 fs/ext4/inode.c:5562 notify_change+0xbb6/0xe60 fs/attr.c:435 do_truncate+0x1de/0x2c0 fs/open.c:64 handle_truncate fs/namei.c:2970 [inline] do_open fs/namei.c:3311 [inline] path_openat+0x29f3/0x3290 fs/namei.c:3425 do_filp_open+0x20b/0x450 fs/namei.c:3452 do_sys_openat2+0x124/0x460 fs/open.c:1207 do_sys_open fs/open.c:1223 [inline] __do_sys_open fs/open.c:1231 [inline] __se_sys_open fs/open.c:1227 [inline] __x64_sys_open+0x221/0x270 fs/open.c:1227 do_syscall_64+0x6d/0xa0 arch/x86/entry/common.c:62 entry_SYSCALL_64_after_hwframe+0x61/0xcb other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&ei->i_data_sem/3); lock(&ea_inode->i_rwsem#7/1); lock(&ei->i_data_sem/3); lock(&ea_inode->i_rwsem#7/1); *** DEADLOCK *** 5 locks held by syz-executor543/2794: #0: ffff888026fbc448 (sb_writers#4){.+.+}-{0:0}, at: mnt_want_write+0x4a/0x2a0 fs/namespace.c:365 #1: ffff8880215e3488 (&sb->s_type->i_mutex_key#7){++++}-{3:3}, at: inode_lock include/linux/fs.h:782 [inline] #1: ffff8880215e3488 (&sb->s_type->i_mutex_key#7){++++}-{3:3}, at: do_truncate+0x1cf/0x2c0 fs/open.c:62 #2: ffff8880215e3310 (&ei->i_mmap_sem){++++}-{3:3}, at: ext4_setattr+0xec4/0x19c0 fs/ext4/inode.c:5519 #3: ffff8880215e3278 (&ei->i_data_sem/3){++++}-{3:3}, at: ext4_setattr+0x136d/0x19c0 fs/ext4/inode.c:5559 #4: ffff8880215e30c8 (&ei->xattr_sem){++++}-{3:3}, at: ext4_write_trylock_xattr fs/ext4/xattr.h:162 [inline] #4: ffff8880215e30c8 (&ei->xattr_sem){++++}-{3:3}, at: ext4_try_to_expand_extra_isize fs/ext4/inode.c:5938 [inline] #4: ffff8880215e30c8 (&ei->xattr_sem){++++}-{3:3}, at: __ext4_mark_inode_dirty+0x4fb/0x810 fs/ext4/inode.c:6018 stack backtrace: CPU: 1 PID: 2794 Comm: syz-executor543 Not tainted 5.10.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x177/0x211 lib/dump_stack.c:118 print_circular_bug+0x146/0x1b0 kernel/locking/lockdep.c:2002 check_noncircular+0x2cc/0x390 kernel/locking/lockdep.c:2123 check_prev_add kernel/locking/lockdep.c:2988 [inline] check_prevs_add kernel/locking/lockdep.c:3113 [inline] validate_chain+0x1695/0x58f0 kernel/locking/lockdep.c:3729 __lock_acquire+0x12fd/0x20d0 kernel/locking/lockdep.c:4955 lock_acquire+0x197/0x480 kernel/locking/lockdep.c:5566 down_write+0x93/0x180 kernel/locking/rwsem.c:1564 inode_lock include/linux/fs.h:782 [inline] ext4_xattr_inode_iget+0x42a/0x5c0 fs/ext4/xattr.c:425 ext4_xattr_inode_get+0x138/0x410 fs/ext4/xattr.c:485 ext4_xattr_move_to_block fs/ext4/xattr.c:2580 [inline] ext4_xattr_make_inode_space fs/ext4/xattr.c:2682 [inline] ext4_expand_extra_isize_ea+0xe70/0x1bb0 fs/ext4/xattr.c:2774 __ext4_expand_extra_isize+0x304/0x3f0 fs/ext4/inode.c:5898 ext4_try_to_expand_extra_isize fs/ext4/inode.c:5941 [inline] __ext4_mark_inode_dirty+0x591/0x810 fs/ext4/inode.c:6018 ext4_setattr+0x1400/0x19c0 fs/ext4/inode.c:5562 notify_change+0xbb6/0xe60 fs/attr.c:435 do_truncate+0x1de/0x2c0 fs/open.c:64 handle_truncate fs/namei.c:2970 [inline] do_open fs/namei.c:3311 [inline] path_openat+0x29f3/0x3290 fs/namei.c:3425 do_filp_open+0x20b/0x450 fs/namei.c:3452 do_sys_openat2+0x124/0x460 fs/open.c:1207 do_sys_open fs/open.c:1223 [inline] __do_sys_open fs/open.c:1231 [inline] __se_sys_open fs/open.c:1227 [inline] __x64_sys_open+0x221/0x270 fs/open.c:1227 do_syscall_64+0x6d/0xa0 arch/x86/entry/common.c:62 entry_SYSCALL_64_after_hwframe+0x61/0xcb RIP: 0033:0x7f0cde4ea229 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 21 18 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffd81d1c978 EFLAGS: 00000246 ORIG_RAX: 0000000000000002 RAX: ffffffffffffffda RBX: 0030656c69662f30 RCX: 00007f0cde4ea229 RDX: 0000000000000089 RSI: 00000000000a0a00 RDI: 00000000200001c0 RBP: 2f30656c69662f2e R08: 0000000000208000 R09: 0000000000208000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007ffd81d1c9c0 R13: 00007ffd81d1ca00 R14: 0000000000080000 R15: 0000000000000003 EXT4-fs error (device loop0): ext4_expand_extra_isize_ea:2730: inode #13: comm syz-executor543: corrupted in-inode xattr Signed-off-by: Wojciech Gładysz <wojciech.gladysz@infogain.com> Link: https://patch.msgid.link/20240801143827.19135-1-wojciech.gladysz@infogain.com Signed-off-by: Theodore Ts'o <tytso@mit.edu>

The fields in the hist_entry are filled on-demand which means they only have meaningful values when relevant sort keys are used. So if neither of 'dso' nor 'sym' sort keys are used, the map/symbols in the hist entry can be garbage. So it shouldn't access it unconditionally. I got a segfault, when I wanted to see cgroup profiles. $ sudo perf record -a --all-cgroups --synth=cgroup true $ sudo perf report -s cgroup Program received signal SIGSEGV, Segmentation fault. 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48 48 return RC_CHK_ACCESS(map)->dso; (gdb) bt #0 0x00005555557a8d90 in map__dso (map=0x0) at util/map.h:48 #1 0x00005555557aa39b in map__load (map=0x0) at util/map.c:344 #2 0x00005555557aa592 in map__find_symbol (map=0x0, addr=140736115941088) at util/map.c:385 #3 0x00005555557ef000 in hists__findnew_entry (hists=0x555556039d60, entry=0x7fffffffa4c0, al=0x7fffffffa8c0, sample_self=true) at util/hist.c:644 #4 0x00005555557ef61c in __hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0, block_info=0x0, sample=0x7fffffffaa90, sample_self=true, ops=0x0) at util/hist.c:761 #5 0x00005555557ef71f in hists__add_entry (hists=0x555556039d60, al=0x7fffffffa8c0, sym_parent=0x0, bi=0x0, mi=0x0, ki=0x0, sample=0x7fffffffaa90, sample_self=true) at util/hist.c:779 #6 0x00005555557f00fb in iter_add_single_normal_entry (iter=0x7fffffffa900, al=0x7fffffffa8c0) at util/hist.c:1015 #7 0x00005555557f09a7 in hist_entry_iter__add (iter=0x7fffffffa900, al=0x7fffffffa8c0, max_stack_depth=127, arg=0x7fffffffbce0) at util/hist.c:1260 #8 0x00005555555ba7ce in process_sample_event (tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at builtin-report.c:334 #9 0x00005555557b30c8 in evlist__deliver_sample (evlist=0x555556039010, tool=0x7fffffffbce0, event=0x7ffff7c14128, sample=0x7fffffffaa90, evsel=0x555556039ad0, machine=0x5555560388e8) at util/session.c:1232 #10 0x00005555557b32bc in machines__deliver_event (machines=0x5555560388e8, evlist=0x555556039010, event=0x7ffff7c14128, sample=0x7fffffffaa90, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1271 #11 0x00005555557b3848 in perf_session__deliver_event (session=0x5555560386d0, event=0x7ffff7c14128, tool=0x7fffffffbce0, file_offset=110888, file_path=0x555556038ff0 "perf.data") at util/session.c:1354 #12 0x00005555557affaf in ordered_events__deliver_event (oe=0x555556038e60, event=0x555556135aa0) at util/session.c:132 #13 0x00005555557bb605 in do_flush (oe=0x555556038e60, show_progress=false) at util/ordered-events.c:245 #14 0x00005555557bb95c in __ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND, timestamp=0) at util/ordered-events.c:324 #15 0x00005555557bba46 in ordered_events__flush (oe=0x555556038e60, how=OE_FLUSH__ROUND) at util/ordered-events.c:342 #16 0x00005555557b1b3b in perf_event__process_finished_round (tool=0x7fffffffbce0, event=0x7ffff7c15bb8, oe=0x555556038e60) at util/session.c:780 #17 0x00005555557b3b27 in perf_session__process_user_event (session=0x5555560386d0, event=0x7ffff7c15bb8, file_offset=117688, file_path=0x555556038ff0 "perf.data") at util/session.c:1406 As you can see the entry->ms.map was NULL even if he->ms.map has a value. This is because 'sym' sort key is not given, so it cannot assume whether he->ms.sym and entry->ms.sym is the same. I only checked the 'sym' sort key here as it implies 'dso' behavior (so maps are the same). Fixes: ac01c8c ("perf hist: Update hist symbol when updating maps") Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Matt Fleming <matt@readmodwrite.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20240826221045.1202305-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

…ptions Patch series "mm: split PTE/PMD PT table Kconfig cleanups+clarifications". This series is a follow up to the fixes: "[PATCH v1 0/2] mm/hugetlb: fix hugetlb vs. core-mm PT locking" When working on the fixes, I wondered why 8xx is fine (-> never uses split PT locks) and how PT locking even works properly with PMD page table sharing (-> always requires split PMD PT locks). Let's improve the split PT lock detection, make hugetlb properly depend on it and make 8xx bail out if it would ever get enabled by accident. As an alternative to patch #3 we could extend the Kconfig SPLIT_PTE_PTLOCKS option from patch #2 -- but enforcing it closer to the code that actually implements it feels a bit nicer for documentation purposes, and there is no need to actually disable it because it should always be disabled (!SMP). Did a bunch of cross-compilations to make sure that split PTE/PMD PT locks are still getting used where we would expect them. [1] https://lkml.kernel.org/r/20240725183955.2268884-1-david@redhat.com This patch (of 3): Let's clean that up a bit and prepare for depending on CONFIG_SPLIT_PMD_PTLOCKS in other Kconfig options. More cleanups would be reasonable (like the arch-specific "depends on" for CONFIG_SPLIT_PTE_PTLOCKS), but we'll leave that for another day. Link: https://lkml.kernel.org/r/20240726150728.3159964-1-david@redhat.com Link: https://lkml.kernel.org/r/20240726150728.3159964-2-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Mike Rapoport (Microsoft) <rppt@kernel.org> Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Qi Zheng <zhengqi.arch@bytedance.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Borislav Petkov <bp@alien8.de> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Christian Brauner <brauner@kernel.org> Cc: Christophe Leroy <christophe.leroy@csgroup.eu> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Juergen Gross <jgross@suse.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Muchun Song <muchun.song@linux.dev> Cc: "Naveen N. Rao" <naveen.n.rao@linux.ibm.com> Cc: Nicholas Piggin <npiggin@gmail.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Peter Xu <peterx@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

commit 823430c ("memory tier: consolidate the initialization of memory tiers") introduces a locking change that use guard(mutex) to instead of mutex_lock/unlock() for memory_tier_lock. It unexpectedly expanded the locked region to include the hotplug_memory_notifier(), as a result, it triggers an locking dependency detected of ABBA deadlock. Exclude hotplug_memory_notifier() from the locked region to fixing it. The deadlock scenario is that when a memory online event occurs, the execution of memory notifier will access the read lock of the memory_chain.rwsem, then the reigistration of the memory notifier in memory_tier_init() acquires the write lock of the memory_chain.rwsem while holding memory_tier_lock. Then the memory online event continues to invoke the memory hotplug callback registered by memory_tier_init(). Since this callback tries to acquire the memory_tier_lock, a deadlock occurs. In fact, this deadlock can't happen because memory_tier_init() always executes before memory online events happen due to the subsys_initcall() has an higher priority than module_init(). [ 133.491106] WARNING: possible circular locking dependency detected [ 133.493656] 6.11.0-rc2+ #146 Tainted: G O N [ 133.504290] ------------------------------------------------------ [ 133.515194] (udev-worker)/1133 is trying to acquire lock: [ 133.525715] ffffffff87044e28 (memory_tier_lock){+.+.}-{3:3}, at: memtier_hotplug_callback+0x383/0x4b0 [ 133.536449] [ 133.536449] but task is already holding lock: [ 133.549847] ffffffff875d3310 ((memory_chain).rwsem){++++}-{3:3}, at: blocking_notifier_call_chain+0x60/0xb0 [ 133.556781] [ 133.556781] which lock already depends on the new lock. [ 133.556781] [ 133.569957] [ 133.569957] the existing dependency chain (in reverse order) is: [ 133.577618] [ 133.577618] -> #1 ((memory_chain).rwsem){++++}-{3:3}: [ 133.584997] down_write+0x97/0x210 [ 133.588647] blocking_notifier_chain_register+0x71/0xd0 [ 133.592537] register_memory_notifier+0x26/0x30 [ 133.596314] memory_tier_init+0x187/0x300 [ 133.599864] do_one_initcall+0x117/0x5d0 [ 133.603399] kernel_init_freeable+0xab0/0xeb0 [ 133.606986] kernel_init+0x28/0x2f0 [ 133.610312] ret_from_fork+0x59/0x90 [ 133.613652] ret_from_fork_asm+0x1a/0x30 [ 133.617012] [ 133.617012] -> #0 (memory_tier_lock){+.+.}-{3:3}: [ 133.623390] __lock_acquire+0x2efd/0x5c60 [ 133.626730] lock_acquire+0x1ce/0x580 [ 133.629757] __mutex_lock+0x15c/0x1490 [ 133.632731] mutex_lock_nested+0x1f/0x30 [ 133.635717] memtier_hotplug_callback+0x383/0x4b0 [ 133.638748] notifier_call_chain+0xbf/0x370 [ 133.641647] blocking_notifier_call_chain+0x76/0xb0 [ 133.644636] memory_notify+0x2e/0x40 [ 133.647427] online_pages+0x597/0x720 [ 133.650246] memory_subsys_online+0x4f6/0x7f0 [ 133.653107] device_online+0x141/0x1d0 [ 133.655831] online_memory_block+0x4d/0x60 [ 133.658616] walk_memory_blocks+0xc0/0x120 [ 133.661419] add_memory_resource+0x51d/0x6c0 [ 133.664202] add_memory_driver_managed+0xf5/0x180 [ 133.667060] dev_dax_kmem_probe+0x7f7/0xb40 [kmem] [ 133.669949] dax_bus_probe+0x147/0x230 [ 133.672687] really_probe+0x27f/0xac0 [ 133.675463] __driver_probe_device+0x1f3/0x460 [ 133.678493] driver_probe_device+0x56/0x1b0 [ 133.681366] __driver_attach+0x277/0x570 [ 133.684149] bus_for_each_dev+0x145/0x1e0 [ 133.686937] driver_attach+0x49/0x60 [ 133.689673] bus_add_driver+0x2f3/0x6b0 [ 133.692421] driver_register+0x170/0x4b0 [ 133.695118] __dax_driver_register+0x141/0x1b0 [ 133.697910] dax_kmem_init+0x54/0xff0 [kmem] [ 133.700794] do_one_initcall+0x117/0x5d0 [ 133.703455] do_init_module+0x277/0x750 [ 133.706054] load_module+0x5d1d/0x74f0 [ 133.708602] init_module_from_file+0x12c/0x1a0 [ 133.711234] idempotent_init_module+0x3f1/0x690 [ 133.713937] __x64_sys_finit_module+0x10e/0x1a0 [ 133.716492] x64_sys_call+0x184d/0x20d0 [ 133.719053] do_syscall_64+0x6d/0x140 [ 133.721537] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 133.724239] [ 133.724239] other info that might help us debug this: [ 133.724239] [ 133.730832] Possible unsafe locking scenario: [ 133.730832] [ 133.735298] CPU0 CPU1 [ 133.737759] ---- ---- [ 133.740165] rlock((memory_chain).rwsem); [ 133.742623] lock(memory_tier_lock); [ 133.745357] lock((memory_chain).rwsem); [ 133.748141] lock(memory_tier_lock); [ 133.750489] [ 133.750489] *** DEADLOCK *** [ 133.750489] [ 133.756742] 6 locks held by (udev-worker)/1133: [ 133.759179] #0: ffff888207be6158 (&dev->mutex){....}-{3:3}, at: __driver_attach+0x26c/0x570 [ 133.762299] #1: ffffffff875b5868 (device_hotplug_lock){+.+.}-{3:3}, at: lock_device_hotplug+0x20/0x30 [ 133.765565] #2: ffff88820cf6a108 (&dev->mutex){....}-{3:3}, at: device_online+0x2f/0x1d0 [ 133.768978] #3: ffffffff86d08ff0 (cpu_hotplug_lock){++++}-{0:0}, at: mem_hotplug_begin+0x17/0x30 [ 133.772312] #4: ffffffff8702dfb0 (mem_hotplug_lock){++++}-{0:0}, at: mem_hotplug_begin+0x23/0x30 [ 133.775544] #5: ffffffff875d3310 ((memory_chain).rwsem){++++}-{3:3}, at: blocking_notifier_call_chain+0x60/0xb0 [ 133.779113] [ 133.779113] stack backtrace: [ 133.783728] CPU: 5 UID: 0 PID: 1133 Comm: (udev-worker) Tainted: G O N 6.11.0-rc2+ #146 [ 133.787220] Tainted: [O]=OOT_MODULE, [N]=TEST [ 133.789948] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 [ 133.793291] Call Trace: [ 133.795826] <TASK> [ 133.798284] dump_stack_lvl+0xea/0x150 [ 133.801025] dump_stack+0x19/0x20 [ 133.803609] print_circular_bug+0x477/0x740 [ 133.806341] check_noncircular+0x2f4/0x3e0 [ 133.809056] ? __pfx_check_noncircular+0x10/0x10 [ 133.811866] ? __pfx_lockdep_lock+0x10/0x10 [ 133.814670] ? __sanitizer_cov_trace_const_cmp8+0x1c/0x30 [ 133.817610] __lock_acquire+0x2efd/0x5c60 [ 133.820339] ? __pfx___lock_acquire+0x10/0x10 [ 133.823128] ? __dax_driver_register+0x141/0x1b0 [ 133.825926] ? do_one_initcall+0x117/0x5d0 [ 133.828648] lock_acquire+0x1ce/0x580 [ 133.831349] ? memtier_hotplug_callback+0x383/0x4b0 [ 133.834293] ? __pfx_lock_acquire+0x10/0x10 [ 133.837134] __mutex_lock+0x15c/0x1490 [ 133.839829] ? memtier_hotplug_callback+0x383/0x4b0 [ 133.842753] ? memtier_hotplug_callback+0x383/0x4b0 [ 133.845602] ? __this_cpu_preempt_check+0x21/0x30 [ 133.848438] ? __pfx___mutex_lock+0x10/0x10 [ 133.851200] ? __pfx_lock_acquire+0x10/0x10 [ 133.853935] ? global_dirty_limits+0xc0/0x160 [ 133.856699] ? __sanitizer_cov_trace_switch+0x58/0xa0 [ 133.859564] mutex_lock_nested+0x1f/0x30 [ 133.862251] ? mutex_lock_nested+0x1f/0x30 [ 133.864964] memtier_hotplug_callback+0x383/0x4b0 [ 133.867752] notifier_call_chain+0xbf/0x370 [ 133.870550] ? writeback_set_ratelimit+0xe8/0x160 [ 133.873372] blocking_notifier_call_chain+0x76/0xb0 [ 133.876311] memory_notify+0x2e/0x40 [ 133.879013] online_pages+0x597/0x720 [ 133.881686] ? irqentry_exit+0x3e/0xa0 [ 133.884397] ? __pfx_online_pages+0x10/0x10 [ 133.887244] ? __sanitizer_cov_trace_const_cmp8+0x1c/0x30 [ 133.890299] ? mhp_init_memmap_on_memory+0x7a/0x1c0 [ 133.893203] memory_subsys_online+0x4f6/0x7f0 [ 133.896099] ? __pfx_memory_subsys_online+0x10/0x10 [ 133.899039] ? xa_load+0x16d/0x2e0 [ 133.901667] ? __pfx_xa_load+0x10/0x10 [ 133.904366] ? __pfx_memory_subsys_online+0x10/0x10 [ 133.907218] device_online+0x141/0x1d0 [ 133.909845] online_memory_block+0x4d/0x60 [ 133.912494] walk_memory_blocks+0xc0/0x120 [ 133.915104] ? __pfx_online_memory_block+0x10/0x10 [ 133.917776] add_memory_resource+0x51d/0x6c0 [ 133.920404] ? __pfx_add_memory_resource+0x10/0x10 [ 133.923104] ? _raw_write_unlock+0x31/0x60 [ 133.925781] ? register_memory_resource+0x119/0x180 [ 133.928450] add_memory_driver_managed+0xf5/0x180 [ 133.931036] dev_dax_kmem_probe+0x7f7/0xb40 [kmem] [ 133.933665] ? __pfx_dev_dax_kmem_probe+0x10/0x10 [kmem] [ 133.936332] ? __pfx___up_read+0x10/0x10 [ 133.938878] dax_bus_probe+0x147/0x230 [ 133.941332] ? __pfx_dax_bus_probe+0x10/0x10 [ 133.943954] really_probe+0x27f/0xac0 [ 133.946387] ? __sanitizer_cov_trace_const_cmp1+0x1e/0x30 [ 133.949106] __driver_probe_device+0x1f3/0x460 [ 133.951704] ? parse_option_str+0x149/0x190 [ 133.954241] driver_probe_device+0x56/0x1b0 [ 133.956749] __driver_attach+0x277/0x570 [ 133.959228] ? __pfx___driver_attach+0x10/0x10 [ 133.961776] bus_for_each_dev+0x145/0x1e0 [ 133.964367] ? __pfx_bus_for_each_dev+0x10/0x10 [ 133.967019] ? __kasan_check_read+0x15/0x20 [ 133.969543] ? _raw_spin_unlock+0x31/0x60 [ 133.972132] driver_attach+0x49/0x60 [ 133.974536] bus_add_driver+0x2f3/0x6b0 [ 133.977044] driver_register+0x170/0x4b0 [ 133.979480] __dax_driver_register+0x141/0x1b0 [ 133.982126] ? __pfx_dax_kmem_init+0x10/0x10 [kmem] [ 133.984724] dax_kmem_init+0x54/0xff0 [kmem] [ 133.987284] ? __pfx_dax_kmem_init+0x10/0x10 [kmem] [ 133.989965] do_one_initcall+0x117/0x5d0 [ 133.992506] ? __pfx_do_one_initcall+0x10/0x10 [ 133.995185] ? __kasan_kmalloc+0x88/0xa0 [ 133.997748] ? kasan_poison+0x3e/0x60 [ 134.000288] ? kasan_unpoison+0x2c/0x60 [ 134.002762] ? kasan_poison+0x3e/0x60 [ 134.005202] ? __asan_register_globals+0x62/0x80 [ 134.007753] ? __pfx_dax_kmem_init+0x10/0x10 [kmem] [ 134.010439] do_init_module+0x277/0x750 [ 134.012953] load_module+0x5d1d/0x74f0 [ 134.015406] ? __pfx_load_module+0x10/0x10 [ 134.017887] ? __pfx_ima_post_read_file+0x10/0x10 [ 134.020470] ? __sanitizer_cov_trace_const_cmp8+0x1c/0x30 [ 134.023127] ? __sanitizer_cov_trace_const_cmp4+0x1a/0x20 [ 134.025767] ? security_kernel_post_read_file+0xa2/0xd0 [ 134.028429] ? __sanitizer_cov_trace_const_cmp4+0x1a/0x20 [ 134.031162] ? kernel_read_file+0x503/0x820 [ 134.033645] ? __pfx_kernel_read_file+0x10/0x10 [ 134.036232] ? __pfx___lock_acquire+0x10/0x10 [ 134.038766] init_module_from_file+0x12c/0x1a0 [ 134.041291] ? init_module_from_file+0x12c/0x1a0 [ 134.043936] ? __pfx_init_module_from_file+0x10/0x10 [ 134.046516] ? __this_cpu_preempt_check+0x21/0x30 [ 134.049091] ? __kasan_check_read+0x15/0x20 [ 134.051551] ? do_raw_spin_unlock+0x60/0x210 [ 134.054077] idempotent_init_module+0x3f1/0x690 [ 134.056643] ? __pfx_idempotent_init_module+0x10/0x10 [ 134.059318] ? __sanitizer_cov_trace_const_cmp4+0x1a/0x20 [ 134.061995] ? __fget_light+0x17d/0x210 [ 134.064428] __x64_sys_finit_module+0x10e/0x1a0 [ 134.066976] x64_sys_call+0x184d/0x20d0 [ 134.069405] do_syscall_64+0x6d/0x140 [ 134.071926] entry_SYSCALL_64_after_hwframe+0x76/0x7e [yanfei.xu@intel.com: add mutex_lock/unlock() pair back] Link: https://lkml.kernel.org/r/20240830102447.1445296-1-yanfei.xu@intel.com Link: https://lkml.kernel.org/r/20240827113614.1343049-1-yanfei.xu@intel.com Fixes: 823430c ("memory tier: consolidate the initialization of memory tiers") Signed-off-by: Yanfei Xu <yanfei.xu@intel.com> Reviewed-by: "Huang, Ying" <ying.huang@intel.com> Cc: Ho-Ren (Jack) Chuang <horen.chuang@linux.dev> Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Patch series "zram: introduce custom comp backends API", v7. This series introduces support for run-time compression algorithms tuning, so users, for instance, can adjust compression/acceleration levels and provide pre-trained compression/decompression dictionaries which certain algorithms support. At this point we stop supporting (old/deprecated) comp API. We may add new acomp API support in the future, but before that zram needs to undergo some major rework (we are not ready for async compression). Some benchmarks for reference (look at column #2) *** init zstd /sys/block/zram0/mm_stat 1750659072 504622188 514355200 0 514355200 1 0 34204 34204 *** init zstd dict=/home/ss/zstd-dict-amd64 /sys/block/zram0/mm_stat 1750650880 465908890 475398144 0 475398144 1 0 34185 34185 *** init zstd level=8 dict=/home/ss/zstd-dict-amd64 /sys/block/zram0/mm_stat 1750654976 430803319 439873536 0 439873536 1 0 34185 34185 *** init lz4 /sys/block/zram0/mm_stat 1750646784 664266564 677060608 0 677060608 1 0 34288 34288 *** init lz4 dict=/home/ss/lz4-dict-amd64 /sys/block/zram0/mm_stat 1750650880 619990300 632102912 0 632102912 1 0 34278 34278 *** init lz4hc /sys/block/zram0/mm_stat 1750630400 609023822 621232128 0 621232128 1 0 34288 34288 *** init lz4hc dict=/home/ss/lz4-dict-amd64 /sys/block/zram0/mm_stat 1750659072 505133172 515231744 0 515231744 1 0 34278 34278 Recompress init zram zstd (prio=0), zstd level=5 (prio 1), zstd with dict (prio 2) *** zstd /sys/block/zram0/mm_stat 1750982656 504630584 514269184 0 514269184 1 0 34204 34204 *** idle recompress priority=1 (zstd level=5) /sys/block/zram0/mm_stat 1750982656 488645601 525438976 0 514269184 1 0 34204 34204 *** idle recompress priority=2 (zstd dict) /sys/block/zram0/mm_stat 1750982656 460869640 517914624 0 514269184 1 0 34185 34204 This patch (of 24): We need to export a number of API functions that enable advanced zstd usage - C/D dictionaries, dictionaries sharing between contexts, etc. Link: https://lkml.kernel.org/r/20240902105656.1383858-1-senozhatsky@chromium.org Link: https://lkml.kernel.org/r/20240902105656.1383858-2-senozhatsky@chromium.org Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Nick Terrell <terrelln@fb.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Hou Tao says: ==================== The tiny patch set aims to fix two problems found during the development of supporting dynptr key in hash table. Patch #1 fixes the missed btf_record_free() when map creation fails and patch #2 fixes the missed kfree() when there is no special field in the passed btf. ==================== Link: https://lore.kernel.org/r/20240912012845.3458483-1-houtao@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>

The following calculation used in coalesced_mmio_has_room() to check whether the ring buffer is full is wrong and results in premature exits if the start of the valid entries is in the first half of the ring buffer. avail = (ring->first - last - 1) % KVM_COALESCED_MMIO_MAX; if (avail == 0) /* full */ Because negative values are handled using two's complement, and KVM computes the result as an unsigned value, the above will get a false positive if "first < last" and the ring is half-full. The above might have worked as expected in python for example: >>> (-86) % 170 84 However it doesn't work the same way in C. printf("avail: %d\n", (-86) % 170); printf("avail: %u\n", (-86) % 170); printf("avail: %u\n", (-86u) % 170u); Using gcc-11 these print: avail: -86 avail: 4294967210 avail: 0 For illustration purposes, given a 4-bit integer and a ring size of 0xA (unsigned), 0xA == 0x1010 == -6, and thus (-6u % 0xA) == 0. Fix the calculation and allow all but one entries in the buffer to be used as originally intended. Note, KVM's behavior is self-healing to some extent, as KVM will allow the entire buffer to be used if ring->first is beyond the halfway point. In other words, in the unlikely scenario that a use case benefits from being able to coalesce more than 86 entries at once, KVM will still provide such behavior, sometimes. Note #2, the % operator in C is not the modulo operator but the remainder operator. Modulo and remainder operators differ with respect to negative values. But, the relevant values in KVM are all unsigned, so it's a moot point in this case anyway. Note #3, this is almost a pure revert of the buggy commit, plus a READ_ONCE() to provide additional safety. Thue buggy commit justified the change with "it paves the way for making this function lockless", but it's not at all clear what was intended, nor is there any evidence that the buggy code was somehow safer. (a) the fields in question were already accessed locklessly, from the perspective that they could be modified by userspace at any time, and (b) the lock guarding the ring itself was changed, but never dropped, i.e. whatever lockless scheme (SRCU?) was planned never landed. Fixes: 105f8d4 ("KVM: Calculate available entries in coalesced mmio ring") Signed-off-by: Ilias Stamatis <ilstam@amazon.com> Reviewed-by: Paul Durrant <paul@xen.org> Link: https://lore.kernel.org/r/20240718193543.624039-2-ilstam@amazon.com [sean: rework changelog to clarify behavior, call out weirdness of buggy commit] Signed-off-by: Sean Christopherson <seanjc@google.com>

Use a dedicated mutex to guard kvm_usage_count to fix a potential deadlock on x86 due to a chain of locks and SRCU synchronizations. Translating the below lockdep splat, CPU1 #6 will wait on CPU0 #1, CPU0 #8 will wait on CPU2 #3, and CPU2 #7 will wait on CPU1 #4 (if there's a writer, due to the fairness of r/w semaphores). CPU0 CPU1 CPU2 1 lock(&kvm->slots_lock); 2 lock(&vcpu->mutex); 3 lock(&kvm->srcu); 4 lock(cpu_hotplug_lock); 5 lock(kvm_lock); 6 lock(&kvm->slots_lock); 7 lock(cpu_hotplug_lock); 8 sync(&kvm->srcu); Note, there are likely more potential deadlocks in KVM x86, e.g. the same pattern of taking cpu_hotplug_lock outside of kvm_lock likely exists with __kvmclock_cpufreq_notifier(): cpuhp_cpufreq_online() | -> cpufreq_online() | -> cpufreq_gov_performance_limits() | -> __cpufreq_driver_target() | -> __target_index() | -> cpufreq_freq_transition_begin() | -> cpufreq_notify_transition() | -> ... __kvmclock_cpufreq_notifier() But, actually triggering such deadlocks is beyond rare due to the combination of dependencies and timings involved. E.g. the cpufreq notifier is only used on older CPUs without a constant TSC, mucking with the NX hugepage mitigation while VMs are running is very uncommon, and doing so while also onlining/offlining a CPU (necessary to generate contention on cpu_hotplug_lock) would be even more unusual. The most robust solution to the general cpu_hotplug_lock issue is likely to switch vm_list to be an RCU-protected list, e.g. so that x86's cpufreq notifier doesn't to take kvm_lock. For now, settle for fixing the most blatant deadlock, as switching to an RCU-protected list is a much more involved change, but add a comment in locking.rst to call out that care needs to be taken when walking holding kvm_lock and walking vm_list. ====================================================== WARNING: possible circular locking dependency detected 6.10.0-smp--c257535a0c9d-pip #330 Tainted: G S O ------------------------------------------------------ tee/35048 is trying to acquire lock: ff6a80eced71e0a8 (&kvm->slots_lock){+.+.}-{3:3}, at: set_nx_huge_pages+0x179/0x1e0 [kvm] but task is already holding lock: ffffffffc07abb08 (kvm_lock){+.+.}-{3:3}, at: set_nx_huge_pages+0x14a/0x1e0 [kvm] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #3 (kvm_lock){+.+.}-{3:3}: __mutex_lock+0x6a/0xb40 mutex_lock_nested+0x1f/0x30 kvm_dev_ioctl+0x4fb/0xe50 [kvm] __se_sys_ioctl+0x7b/0xd0 __x64_sys_ioctl+0x21/0x30 x64_sys_call+0x15d0/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #2 (cpu_hotplug_lock){++++}-{0:0}: cpus_read_lock+0x2e/0xb0 static_key_slow_inc+0x16/0x30 kvm_lapic_set_base+0x6a/0x1c0 [kvm] kvm_set_apic_base+0x8f/0xe0 [kvm] kvm_set_msr_common+0x9ae/0xf80 [kvm] vmx_set_msr+0xa54/0xbe0 [kvm_intel] __kvm_set_msr+0xb6/0x1a0 [kvm] kvm_arch_vcpu_ioctl+0xeca/0x10c0 [kvm] kvm_vcpu_ioctl+0x485/0x5b0 [kvm] __se_sys_ioctl+0x7b/0xd0 __x64_sys_ioctl+0x21/0x30 x64_sys_call+0x15d0/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #1 (&kvm->srcu){.+.+}-{0:0}: __synchronize_srcu+0x44/0x1a0 synchronize_srcu_expedited+0x21/0x30 kvm_swap_active_memslots+0x110/0x1c0 [kvm] kvm_set_memslot+0x360/0x620 [kvm] __kvm_set_memory_region+0x27b/0x300 [kvm] kvm_vm_ioctl_set_memory_region+0x43/0x60 [kvm] kvm_vm_ioctl+0x295/0x650 [kvm] __se_sys_ioctl+0x7b/0xd0 __x64_sys_ioctl+0x21/0x30 x64_sys_call+0x15d0/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #0 (&kvm->slots_lock){+.+.}-{3:3}: __lock_acquire+0x15ef/0x2e30 lock_acquire+0xe0/0x260 __mutex_lock+0x6a/0xb40 mutex_lock_nested+0x1f/0x30 set_nx_huge_pages+0x179/0x1e0 [kvm] param_attr_store+0x93/0x100 module_attr_store+0x22/0x40 sysfs_kf_write+0x81/0xb0 kernfs_fop_write_iter+0x133/0x1d0 vfs_write+0x28d/0x380 ksys_write+0x70/0xe0 __x64_sys_write+0x1f/0x30 x64_sys_call+0x281b/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e Cc: Chao Gao <chao.gao@intel.com> Fixes: 0bf5049 ("KVM: Drop kvm_count_lock and instead protect kvm_usage_count with kvm_lock") Cc: stable@vger.kernel.org Reviewed-by: Kai Huang <kai.huang@intel.com> Acked-by: Kai Huang <kai.huang@intel.com> Tested-by: Farrah Chen <farrah.chen@intel.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-ID: <20240830043600.127750-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

[ Upstream commit 1a0bd28 ] Case frank-w#1: SQLite App GC Thread Kworker Shrinker - f2fs_ioc_start_atomic_write - f2fs_ioc_commit_atomic_write - f2fs_commit_atomic_write - filemap_write_and_wait_range : write atomic_file's data to cow_inode echo 3 > drop_caches to drop atomic_file's cache. - f2fs_gc - gc_data_segment - move_data_page - set_page_dirty - writepages - f2fs_do_write_data_page : overwrite atomic_file's data to cow_inode - f2fs_down_write(&fi->i_gc_rwsem[WRITE]) - __f2fs_commit_atomic_write - f2fs_up_write(&fi->i_gc_rwsem[WRITE]) Case frank-w#2: SQLite App GC Thread Kworker - f2fs_ioc_start_atomic_write - __writeback_single_inode - do_writepages - f2fs_write_cache_pages - f2fs_write_single_data_page - f2fs_do_write_data_page : write atomic_file's data to cow_inode - f2fs_gc - gc_data_segment - move_data_page - set_page_dirty - writepages - f2fs_do_write_data_page : overwrite atomic_file's data to cow_inode - f2fs_ioc_commit_atomic_write In above cases racing in between atomic_write and GC, previous data in atomic_file may be overwrited to cow_file, result in data corruption. This patch introduces PAGE_PRIVATE_ATOMIC_WRITE bit flag in page.private, and use it to indicate that there is last dirty data in atomic file, and the data should be writebacked into cow_file, if the flag is not tagged in page, we should never write data across files. Fixes: 3db1de0 ("f2fs: change the current atomic write way") Cc: Daeho Jeong <daehojeong@google.com> Signed-off-by: Chao Yu <chao@kernel.org> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 44d1745 upstream. Use a dedicated mutex to guard kvm_usage_count to fix a potential deadlock on x86 due to a chain of locks and SRCU synchronizations. Translating the below lockdep splat, CPU1 frank-w#6 will wait on CPU0 frank-w#1, CPU0 frank-w#8 will wait on CPU2 frank-w#3, and CPU2 frank-w#7 will wait on CPU1 frank-w#4 (if there's a writer, due to the fairness of r/w semaphores). CPU0 CPU1 CPU2 1 lock(&kvm->slots_lock); 2 lock(&vcpu->mutex); 3 lock(&kvm->srcu); 4 lock(cpu_hotplug_lock); 5 lock(kvm_lock); 6 lock(&kvm->slots_lock); 7 lock(cpu_hotplug_lock); 8 sync(&kvm->srcu); Note, there are likely more potential deadlocks in KVM x86, e.g. the same pattern of taking cpu_hotplug_lock outside of kvm_lock likely exists with __kvmclock_cpufreq_notifier(): cpuhp_cpufreq_online() | -> cpufreq_online() | -> cpufreq_gov_performance_limits() | -> __cpufreq_driver_target() | -> __target_index() | -> cpufreq_freq_transition_begin() | -> cpufreq_notify_transition() | -> ... __kvmclock_cpufreq_notifier() But, actually triggering such deadlocks is beyond rare due to the combination of dependencies and timings involved. E.g. the cpufreq notifier is only used on older CPUs without a constant TSC, mucking with the NX hugepage mitigation while VMs are running is very uncommon, and doing so while also onlining/offlining a CPU (necessary to generate contention on cpu_hotplug_lock) would be even more unusual. The most robust solution to the general cpu_hotplug_lock issue is likely to switch vm_list to be an RCU-protected list, e.g. so that x86's cpufreq notifier doesn't to take kvm_lock. For now, settle for fixing the most blatant deadlock, as switching to an RCU-protected list is a much more involved change, but add a comment in locking.rst to call out that care needs to be taken when walking holding kvm_lock and walking vm_list. ====================================================== WARNING: possible circular locking dependency detected 6.10.0-smp--c257535a0c9d-pip #330 Tainted: G S O ------------------------------------------------------ tee/35048 is trying to acquire lock: ff6a80eced71e0a8 (&kvm->slots_lock){+.+.}-{3:3}, at: set_nx_huge_pages+0x179/0x1e0 [kvm] but task is already holding lock: ffffffffc07abb08 (kvm_lock){+.+.}-{3:3}, at: set_nx_huge_pages+0x14a/0x1e0 [kvm] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> frank-w#3 (kvm_lock){+.+.}-{3:3}: __mutex_lock+0x6a/0xb40 mutex_lock_nested+0x1f/0x30 kvm_dev_ioctl+0x4fb/0xe50 [kvm] __se_sys_ioctl+0x7b/0xd0 __x64_sys_ioctl+0x21/0x30 x64_sys_call+0x15d0/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> frank-w#2 (cpu_hotplug_lock){++++}-{0:0}: cpus_read_lock+0x2e/0xb0 static_key_slow_inc+0x16/0x30 kvm_lapic_set_base+0x6a/0x1c0 [kvm] kvm_set_apic_base+0x8f/0xe0 [kvm] kvm_set_msr_common+0x9ae/0xf80 [kvm] vmx_set_msr+0xa54/0xbe0 [kvm_intel] __kvm_set_msr+0xb6/0x1a0 [kvm] kvm_arch_vcpu_ioctl+0xeca/0x10c0 [kvm] kvm_vcpu_ioctl+0x485/0x5b0 [kvm] __se_sys_ioctl+0x7b/0xd0 __x64_sys_ioctl+0x21/0x30 x64_sys_call+0x15d0/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> frank-w#1 (&kvm->srcu){.+.+}-{0:0}: __synchronize_srcu+0x44/0x1a0 synchronize_srcu_expedited+0x21/0x30 kvm_swap_active_memslots+0x110/0x1c0 [kvm] kvm_set_memslot+0x360/0x620 [kvm] __kvm_set_memory_region+0x27b/0x300 [kvm] kvm_vm_ioctl_set_memory_region+0x43/0x60 [kvm] kvm_vm_ioctl+0x295/0x650 [kvm] __se_sys_ioctl+0x7b/0xd0 __x64_sys_ioctl+0x21/0x30 x64_sys_call+0x15d0/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e -> #0 (&kvm->slots_lock){+.+.}-{3:3}: __lock_acquire+0x15ef/0x2e30 lock_acquire+0xe0/0x260 __mutex_lock+0x6a/0xb40 mutex_lock_nested+0x1f/0x30 set_nx_huge_pages+0x179/0x1e0 [kvm] param_attr_store+0x93/0x100 module_attr_store+0x22/0x40 sysfs_kf_write+0x81/0xb0 kernfs_fop_write_iter+0x133/0x1d0 vfs_write+0x28d/0x380 ksys_write+0x70/0xe0 __x64_sys_write+0x1f/0x30 x64_sys_call+0x281b/0x2e60 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e Cc: Chao Gao <chao.gao@intel.com> Fixes: 0bf5049 ("KVM: Drop kvm_count_lock and instead protect kvm_usage_count with kvm_lock") Cc: stable@vger.kernel.org Reviewed-by: Kai Huang <kai.huang@intel.com> Acked-by: Kai Huang <kai.huang@intel.com> Tested-by: Farrah Chen <farrah.chen@intel.com> Signed-off-by: Sean Christopherson <seanjc@google.com> Message-ID: <20240830043600.127750-2-seanjc@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

On the node of an NFS client, some files saved in the mountpoint of the NFS server were copied to another location of the same NFS server. Accidentally, the nfs42_complete_copies() got a NULL-pointer dereference crash with the following syslog: [232064.838881] NFSv4: state recovery failed for open file nfs/pvc-12b5200d-cd0f-46a3-b9f0-af8f4fe0ef64.qcow2, error = -116 [232064.839360] NFSv4: state recovery failed for open file nfs/pvc-12b5200d-cd0f-46a3-b9f0-af8f4fe0ef64.qcow2, error = -116 [232066.588183] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000058 [232066.588586] Mem abort info: [232066.588701] ESR = 0x0000000096000007 [232066.588862] EC = 0x25: DABT (current EL), IL = 32 bits [232066.589084] SET = 0, FnV = 0 [232066.589216] EA = 0, S1PTW = 0 [232066.589340] FSC = 0x07: level 3 translation fault [232066.589559] Data abort info: [232066.589683] ISV = 0, ISS = 0x00000007 [232066.589842] CM = 0, WnR = 0 [232066.589967] user pgtable: 64k pages, 48-bit VAs, pgdp=00002000956ff400 [232066.590231] [0000000000000058] pgd=08001100ae100003, p4d=08001100ae100003, pud=08001100ae100003, pmd=08001100b3c00003, pte=0000000000000000 [232066.590757] Internal error: Oops: 96000007 [#1] SMP [232066.590958] Modules linked in: rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs ocfs2_dlmfs ocfs2_stack_o2cb ocfs2_dlm vhost_net vhost vhost_iotlb tap tun ipt_rpfilter xt_multiport ip_set_hash_ip ip_set_hash_net xfrm_interface xfrm6_tunnel tunnel4 tunnel6 esp4 ah4 wireguard libcurve25519_generic veth xt_addrtype xt_set nf_conntrack_netlink ip_set_hash_ipportnet ip_set_hash_ipportip ip_set_bitmap_port ip_set_hash_ipport dummy ip_set ip_vs_sh ip_vs_wrr ip_vs_rr ip_vs iptable_filter sch_ingress nfnetlink_cttimeout vport_gre ip_gre ip_tunnel gre vport_geneve geneve vport_vxlan vxlan ip6_udp_tunnel udp_tunnel openvswitch nf_conncount dm_round_robin dm_service_time dm_multipath xt_nat xt_MASQUERADE nft_chain_nat nf_nat xt_mark xt_conntrack xt_comment nft_compat nft_counter nf_tables nfnetlink ocfs2 ocfs2_nodemanager ocfs2_stackglue iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ipmi_ssif nbd overlay 8021q garp mrp bonding tls rfkill sunrpc ext4 mbcache jbd2 [232066.591052] vfat fat cas_cache cas_disk ses enclosure scsi_transport_sas sg acpi_ipmi ipmi_si ipmi_devintf ipmi_msghandler ip_tables vfio_pci vfio_pci_core vfio_virqfd vfio_iommu_type1 vfio dm_mirror dm_region_hash dm_log dm_mod nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter bridge stp llc fuse xfs libcrc32c ast drm_vram_helper qla2xxx drm_kms_helper syscopyarea crct10dif_ce sysfillrect ghash_ce sysimgblt sha2_ce fb_sys_fops cec sha256_arm64 sha1_ce drm_ttm_helper ttm nvme_fc igb sbsa_gwdt nvme_fabrics drm nvme_core i2c_algo_bit i40e scsi_transport_fc megaraid_sas aes_neon_bs [232066.596953] CPU: 6 PID: 4124696 Comm: 10.253.166.125- Kdump: loaded Not tainted 5.15.131-9.cl9_ocfs2.aarch64 #1 [232066.597356] Hardware name: Great Wall .\x93\x8e...RF6260 V5/GWMSSE2GL1T, BIOS T656FBE_V3.0.18 2024-01-06 [232066.597721] pstate: 20400009 (nzCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [232066.598034] pc : nfs4_reclaim_open_state+0x220/0x800 [nfsv4] [232066.598327] lr : nfs4_reclaim_open_state+0x12c/0x800 [nfsv4] [232066.598595] sp : ffff8000f568fc70 [232066.598731] x29: ffff8000f568fc70 x28: 0000000000001000 x27: ffff21003db33000 [232066.599030] x26: ffff800005521ae0 x25: ffff0100f98fa3f0 x24: 0000000000000001 [232066.599319] x23: ffff800009920008 x22: ffff21003db33040 x21: ffff21003db33050 [232066.599628] x20: ffff410172fe9e40 x19: ffff410172fe9e00 x18: 0000000000000000 [232066.599914] x17: 0000000000000000 x16: 0000000000000004 x15: 0000000000000000 [232066.600195] x14: 0000000000000000 x13: ffff800008e685a8 x12: 00000000eac0c6e6 [232066.600498] x11: 0000000000000000 x10: 0000000000000008 x9 : ffff8000054e5828 [232066.600784] x8 : 00000000ffffffbf x7 : 0000000000000001 x6 : 000000000a9eb14a [232066.601062] x5 : 0000000000000000 x4 : ffff70ff8a14a800 x3 : 0000000000000058 [232066.601348] x2 : 0000000000000001 x1 : 54dce46366daa6c6 x0 : 0000000000000000 [232066.601636] Call trace: [232066.601749] nfs4_reclaim_open_state+0x220/0x800 [nfsv4] [232066.601998] nfs4_do_reclaim+0x1b8/0x28c [nfsv4] [232066.602218] nfs4_state_manager+0x928/0x10f0 [nfsv4] [232066.602455] nfs4_run_state_manager+0x78/0x1b0 [nfsv4] [232066.602690] kthread+0x110/0x114 [232066.602830] ret_from_fork+0x10/0x20 [232066.602985] Code: 1400000d f9403f20 f9402e61 91016003 (f9402c00) [232066.603284] SMP: stopping secondary CPUs [232066.606936] Starting crashdump kernel... [232066.607146] Bye! Analysing the vmcore, we know that nfs4_copy_state listed by destination nfs_server->ss_copies was added by the field copies in handle_async_copy(), and we found a waiting copy process with the stack as: PID: 3511963 TASK: ffff710028b47e00 CPU: 0 COMMAND: "cp" #0 [ffff8001116ef740] __switch_to at ffff8000081b92f4 #1 [ffff8001116ef760] __schedule at ffff800008dd0650 #2 [ffff8001116ef7c0] schedule at ffff800008dd0a00 #3 [ffff8001116ef7e0] schedule_timeout at ffff800008dd6aa0 #4 [ffff8001116ef860] __wait_for_common at ffff800008dd166c #5 [ffff8001116ef8e0] wait_for_completion_interruptible at ffff800008dd1898 #6 [ffff8001116ef8f0] handle_async_copy at ffff8000055142f4 [nfsv4] #7 [ffff8001116ef970] _nfs42_proc_copy at ffff8000055147c8 [nfsv4] #8 [ffff8001116efa80] nfs42_proc_copy at ffff800005514cf0 [nfsv4] #9 [ffff8001116efc50] __nfs4_copy_file_range.constprop.0 at ffff8000054ed694 [nfsv4] The NULL-pointer dereference was due to nfs42_complete_copies() listed the nfs_server->ss_copies by the field ss_copies of nfs4_copy_state. So the nfs4_copy_state address ffff0100f98fa3f0 was offset by 0x10 and the data accessed through this pointer was also incorrect. Generally, the ordered list nfs4_state_owner->so_states indicate open(O_RDWR) or open(O_WRITE) states are reclaimed firstly by nfs4_reclaim_open_state(). When destination state reclaim is failed with NFS_STATE_RECOVERY_FAILED and copies are not deleted in nfs_server->ss_copies, the source state may be passed to the nfs42_complete_copies() process earlier, resulting in this crash scene finally. To solve this issue, we add a list_head nfs_server->ss_src_copies for a server-to-server copy specially. Fixes: 0e65a32 ("NFS: handle source server reboot") Signed-off-by: Yanjun Zhang <zhangyanjun@cestc.cn> Reviewed-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <anna.schumaker@oracle.com>

Fix a kernel panic in the br_netfilter module when sending untagged traffic via a VxLAN device. This happens during the check for fragmentation in br_nf_dev_queue_xmit. It is dependent on: 1) the br_netfilter module being loaded; 2) net.bridge.bridge-nf-call-iptables set to 1; 3) a bridge with a VxLAN (single-vxlan-device) netdevice as a bridge port; 4) untagged frames with size higher than the VxLAN MTU forwarded/flooded When forwarding the untagged packet to the VxLAN bridge port, before the netfilter hooks are called, br_handle_egress_vlan_tunnel is called and changes the skb_dst to the tunnel dst. The tunnel_dst is a metadata type of dst, i.e., skb_valid_dst(skb) is false, and metadata->dst.dev is NULL. Then in the br_netfilter hooks, in br_nf_dev_queue_xmit, there's a check for frames that needs to be fragmented: frames with higher MTU than the VxLAN device end up calling br_nf_ip_fragment, which in turns call ip_skb_dst_mtu. The ip_dst_mtu tries to use the skb_dst(skb) as if it was a valid dst with valid dst->dev, thus the crash. This case was never supported in the first place, so drop the packet instead. PING 10.0.0.2 (10.0.0.2) from 0.0.0.0 h1-eth0: 2000(2028) bytes of data. [ 176.291791] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000110 [ 176.292101] Mem abort info: [ 176.292184] ESR = 0x0000000096000004 [ 176.292322] EC = 0x25: DABT (current EL), IL = 32 bits [ 176.292530] SET = 0, FnV = 0 [ 176.292709] EA = 0, S1PTW = 0 [ 176.292862] FSC = 0x04: level 0 translation fault [ 176.293013] Data abort info: [ 176.293104] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 176.293488] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 176.293787] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 176.293995] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000043ef5000 [ 176.294166] [0000000000000110] pgd=0000000000000000, p4d=0000000000000000 [ 176.294827] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 176.295252] Modules linked in: vxlan ip6_udp_tunnel udp_tunnel veth br_netfilter bridge stp llc ipv6 crct10dif_ce [ 176.295923] CPU: 0 PID: 188 Comm: ping Not tainted 6.8.0-rc3-g5b3fbd61b9d1 #2 [ 176.296314] Hardware name: linux,dummy-virt (DT) [ 176.296535] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 176.296808] pc : br_nf_dev_queue_xmit+0x390/0x4ec [br_netfilter] [ 176.297382] lr : br_nf_dev_queue_xmit+0x2ac/0x4ec [br_netfilter] [ 176.297636] sp : ffff800080003630 [ 176.297743] x29: ffff800080003630 x28: 0000000000000008 x27: ffff6828c49ad9f8 [ 176.298093] x26: ffff6828c49ad000 x25: 0000000000000000 x24: 00000000000003e8 [ 176.298430] x23: 0000000000000000 x22: ffff6828c4960b40 x21: ffff6828c3b16d28 [ 176.298652] x20: ffff6828c3167048 x19: ffff6828c3b16d00 x18: 0000000000000014 [ 176.298926] x17: ffffb0476322f000 x16: ffffb7e164023730 x15: 0000000095744632 [ 176.299296] x14: ffff6828c3f1c880 x13: 0000000000000002 x12: ffffb7e137926a70 [ 176.299574] x11: 0000000000000001 x10: ffff6828c3f1c898 x9 : 0000000000000000 [ 176.300049] x8 : ffff6828c49bf070 x7 : 0008460f18d5f20e x6 : f20e0100bebafeca [ 176.300302] x5 : ffff6828c7f918fe x4 : ffff6828c49bf070 x3 : 0000000000000000 [ 176.300586] x2 : 0000000000000000 x1 : ffff6828c3c7ad00 x0 : ffff6828c7f918f0 [ 176.300889] Call trace: [ 176.301123] br_nf_dev_queue_xmit+0x390/0x4ec [br_netfilter] [ 176.301411] br_nf_post_routing+0x2a8/0x3e4 [br_netfilter] [ 176.301703] nf_hook_slow+0x48/0x124 [ 176.302060] br_forward_finish+0xc8/0xe8 [bridge] [ 176.302371] br_nf_hook_thresh+0x124/0x134 [br_netfilter] [ 176.302605] br_nf_forward_finish+0x118/0x22c [br_netfilter] [ 176.302824] br_nf_forward_ip.part.0+0x264/0x290 [br_netfilter] [ 176.303136] br_nf_forward+0x2b8/0x4e0 [br_netfilter] [ 176.303359] nf_hook_slow+0x48/0x124 [ 176.303803] __br_forward+0xc4/0x194 [bridge] [ 176.304013] br_flood+0xd4/0x168 [bridge] [ 176.304300] br_handle_frame_finish+0x1d4/0x5c4 [bridge] [ 176.304536] br_nf_hook_thresh+0x124/0x134 [br_netfilter] [ 176.304978] br_nf_pre_routing_finish+0x29c/0x494 [br_netfilter] [ 176.305188] br_nf_pre_routing+0x250/0x524 [br_netfilter] [ 176.305428] br_handle_frame+0x244/0x3cc [bridge] [ 176.305695] __netif_receive_skb_core.constprop.0+0x33c/0xecc [ 176.306080] __netif_receive_skb_one_core+0x40/0x8c [ 176.306197] __netif_receive_skb+0x18/0x64 [ 176.306369] process_backlog+0x80/0x124 [ 176.306540] __napi_poll+0x38/0x17c [ 176.306636] net_rx_action+0x124/0x26c [ 176.306758] __do_softirq+0x100/0x26c [ 176.307051] ____do_softirq+0x10/0x1c [ 176.307162] call_on_irq_stack+0x24/0x4c [ 176.307289] do_softirq_own_stack+0x1c/0x2c [ 176.307396] do_softirq+0x54/0x6c [ 176.307485] __local_bh_enable_ip+0x8c/0x98 [ 176.307637] __dev_queue_xmit+0x22c/0xd28 [ 176.307775] neigh_resolve_output+0xf4/0x1a0 [ 176.308018] ip_finish_output2+0x1c8/0x628 [ 176.308137] ip_do_fragment+0x5b4/0x658 [ 176.308279] ip_fragment.constprop.0+0x48/0xec [ 176.308420] __ip_finish_output+0xa4/0x254 [ 176.308593] ip_finish_output+0x34/0x130 [ 176.308814] ip_output+0x6c/0x108 [ 176.308929] ip_send_skb+0x50/0xf0 [ 176.309095] ip_push_pending_frames+0x30/0x54 [ 176.309254] raw_sendmsg+0x758/0xaec [ 176.309568] inet_sendmsg+0x44/0x70 [ 176.309667] __sys_sendto+0x110/0x178 [ 176.309758] __arm64_sys_sendto+0x28/0x38 [ 176.309918] invoke_syscall+0x48/0x110 [ 176.310211] el0_svc_common.constprop.0+0x40/0xe0 [ 176.310353] do_el0_svc+0x1c/0x28 [ 176.310434] el0_svc+0x34/0xb4 [ 176.310551] el0t_64_sync_handler+0x120/0x12c [ 176.310690] el0t_64_sync+0x190/0x194 [ 176.311066] Code: f9402e61 79402aa2 927ff821 f9400023 (f9408860) [ 176.315743] ---[ end trace 0000000000000000 ]--- [ 176.316060] Kernel panic - not syncing: Oops: Fatal exception in interrupt [ 176.316371] Kernel Offset: 0x37e0e3000000 from 0xffff800080000000 [ 176.316564] PHYS_OFFSET: 0xffff97d780000000 [ 176.316782] CPU features: 0x0,88000203,3c020000,0100421b [ 176.317210] Memory Limit: none [ 176.317527] ---[ end Kernel panic - not syncing: Oops: Fatal Exception in interrupt ]---\ Fixes: 11538d0 ("bridge: vlan dst_metadata hooks in ingress and egress paths") Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Andy Roulin <aroulin@nvidia.com> Acked-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/20241001154400.22787-2-aroulin@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Andy Roulin says: ==================== netfilter: br_netfilter: fix panic with metadata_dst skb There's a kernel panic possible in the br_netfilter module when sending untagged traffic via a VxLAN device. Traceback is included below. This happens during the check for fragmentation in br_nf_dev_queue_xmit if the MTU on the VxLAN device is not big enough. It is dependent on: 1) the br_netfilter module being loaded; 2) net.bridge.bridge-nf-call-iptables set to 1; 3) a bridge with a VxLAN (single-vxlan-device) netdevice as a bridge port; 4) untagged frames with size higher than the VxLAN MTU forwarded/flooded This case was never supported in the first place, so the first patch drops such packets. A regression selftest is added as part of the second patch. PING 10.0.0.2 (10.0.0.2) from 0.0.0.0 h1-eth0: 2000(2028) bytes of data. [ 176.291791] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000110 [ 176.292101] Mem abort info: [ 176.292184] ESR = 0x0000000096000004 [ 176.292322] EC = 0x25: DABT (current EL), IL = 32 bits [ 176.292530] SET = 0, FnV = 0 [ 176.292709] EA = 0, S1PTW = 0 [ 176.292862] FSC = 0x04: level 0 translation fault [ 176.293013] Data abort info: [ 176.293104] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 176.293488] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 176.293787] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 176.293995] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000043ef5000 [ 176.294166] [0000000000000110] pgd=0000000000000000, p4d=0000000000000000 [ 176.294827] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 176.295252] Modules linked in: vxlan ip6_udp_tunnel udp_tunnel veth br_netfilter bridge stp llc ipv6 crct10dif_ce [ 176.295923] CPU: 0 PID: 188 Comm: ping Not tainted 6.8.0-rc3-g5b3fbd61b9d1 #2 [ 176.296314] Hardware name: linux,dummy-virt (DT) [ 176.296535] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 176.296808] pc : br_nf_dev_queue_xmit+0x390/0x4ec [br_netfilter] [ 176.297382] lr : br_nf_dev_queue_xmit+0x2ac/0x4ec [br_netfilter] [ 176.297636] sp : ffff800080003630 [ 176.297743] x29: ffff800080003630 x28: 0000000000000008 x27: ffff6828c49ad9f8 [ 176.298093] x26: ffff6828c49ad000 x25: 0000000000000000 x24: 00000000000003e8 [ 176.298430] x23: 0000000000000000 x22: ffff6828c4960b40 x21: ffff6828c3b16d28 [ 176.298652] x20: ffff6828c3167048 x19: ffff6828c3b16d00 x18: 0000000000000014 [ 176.298926] x17: ffffb0476322f000 x16: ffffb7e164023730 x15: 0000000095744632 [ 176.299296] x14: ffff6828c3f1c880 x13: 0000000000000002 x12: ffffb7e137926a70 [ 176.299574] x11: 0000000000000001 x10: ffff6828c3f1c898 x9 : 0000000000000000 [ 176.300049] x8 : ffff6828c49bf070 x7 : 0008460f18d5f20e x6 : f20e0100bebafeca [ 176.300302] x5 : ffff6828c7f918fe x4 : ffff6828c49bf070 x3 : 0000000000000000 [ 176.300586] x2 : 0000000000000000 x1 : ffff6828c3c7ad00 x0 : ffff6828c7f918f0 [ 176.300889] Call trace: [ 176.301123] br_nf_dev_queue_xmit+0x390/0x4ec [br_netfilter] [ 176.301411] br_nf_post_routing+0x2a8/0x3e4 [br_netfilter] [ 176.301703] nf_hook_slow+0x48/0x124 [ 176.302060] br_forward_finish+0xc8/0xe8 [bridge] [ 176.302371] br_nf_hook_thresh+0x124/0x134 [br_netfilter] [ 176.302605] br_nf_forward_finish+0x118/0x22c [br_netfilter] [ 176.302824] br_nf_forward_ip.part.0+0x264/0x290 [br_netfilter] [ 176.303136] br_nf_forward+0x2b8/0x4e0 [br_netfilter] [ 176.303359] nf_hook_slow+0x48/0x124 [ 176.303803] __br_forward+0xc4/0x194 [bridge] [ 176.304013] br_flood+0xd4/0x168 [bridge] [ 176.304300] br_handle_frame_finish+0x1d4/0x5c4 [bridge] [ 176.304536] br_nf_hook_thresh+0x124/0x134 [br_netfilter] [ 176.304978] br_nf_pre_routing_finish+0x29c/0x494 [br_netfilter] [ 176.305188] br_nf_pre_routing+0x250/0x524 [br_netfilter] [ 176.305428] br_handle_frame+0x244/0x3cc [bridge] [ 176.305695] __netif_receive_skb_core.constprop.0+0x33c/0xecc [ 176.306080] __netif_receive_skb_one_core+0x40/0x8c [ 176.306197] __netif_receive_skb+0x18/0x64 [ 176.306369] process_backlog+0x80/0x124 [ 176.306540] __napi_poll+0x38/0x17c [ 176.306636] net_rx_action+0x124/0x26c [ 176.306758] __do_softirq+0x100/0x26c [ 176.307051] ____do_softirq+0x10/0x1c [ 176.307162] call_on_irq_stack+0x24/0x4c [ 176.307289] do_softirq_own_stack+0x1c/0x2c [ 176.307396] do_softirq+0x54/0x6c [ 176.307485] __local_bh_enable_ip+0x8c/0x98 [ 176.307637] __dev_queue_xmit+0x22c/0xd28 [ 176.307775] neigh_resolve_output+0xf4/0x1a0 [ 176.308018] ip_finish_output2+0x1c8/0x628 [ 176.308137] ip_do_fragment+0x5b4/0x658 [ 176.308279] ip_fragment.constprop.0+0x48/0xec [ 176.308420] __ip_finish_output+0xa4/0x254 [ 176.308593] ip_finish_output+0x34/0x130 [ 176.308814] ip_output+0x6c/0x108 [ 176.308929] ip_send_skb+0x50/0xf0 [ 176.309095] ip_push_pending_frames+0x30/0x54 [ 176.309254] raw_sendmsg+0x758/0xaec [ 176.309568] inet_sendmsg+0x44/0x70 [ 176.309667] __sys_sendto+0x110/0x178 [ 176.309758] __arm64_sys_sendto+0x28/0x38 [ 176.309918] invoke_syscall+0x48/0x110 [ 176.310211] el0_svc_common.constprop.0+0x40/0xe0 [ 176.310353] do_el0_svc+0x1c/0x28 [ 176.310434] el0_svc+0x34/0xb4 [ 176.310551] el0t_64_sync_handler+0x120/0x12c [ 176.310690] el0t_64_sync+0x190/0x194 [ 176.311066] Code: f9402e61 79402aa2 927ff821 f9400023 (f9408860) [ 176.315743] ---[ end trace 0000000000000000 ]--- [ 176.316060] Kernel panic - not syncing: Oops: Fatal exception in interrupt [ 176.316371] Kernel Offset: 0x37e0e3000000 from 0xffff800080000000 [ 176.316564] PHYS_OFFSET: 0xffff97d780000000 [ 176.316782] CPU features: 0x0,88000203,3c020000,0100421b [ 176.317210] Memory Limit: none [ 176.317527] ---[ end Kernel panic - not syncing: Oops: Fatal Exception in interrupt ]---\ ==================== Link: https://patch.msgid.link/20241001154400.22787-1-aroulin@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Hou Tao says: ==================== Check the remaining info_cnt before repeating btf fields From: Hou Tao <houtao1@huawei.com> Hi, The patch set adds the missed check again info_cnt when flattening the array of nested struct. The problem was spotted when developing dynptr key support for hash map. Patch #1 adds the missed check and patch #2 adds three success test cases and one failure test case for the problem. Comments are always welcome. Change Log: v2: * patch #1: check info_cnt in btf_repeat_fields() * patch #2: use a hard-coded number instead of BTF_FIELDS_MAX, because BTF_FIELDS_MAX is not always available in vmlinux.h (e.g., for llvm 17/18) v1: https://lore.kernel.org/bpf/20240911110557.2759801-1-houtao@huaweicloud.com/T/#t ==================== Link: https://lore.kernel.org/r/20241008071114.3718177-1-houtao@huaweicloud.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Syzkaller reported a lockdep splat: ============================================ WARNING: possible recursive locking detected 6.11.0-rc6-syzkaller-00019-g67784a74e258 #0 Not tainted -------------------------------------------- syz-executor364/5113 is trying to acquire lock: ffff8880449f1958 (k-slock-AF_INET){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] ffff8880449f1958 (k-slock-AF_INET){+.-.}-{2:2}, at: sk_clone_lock+0x2cd/0xf40 net/core/sock.c:2328 but task is already holding lock: ffff88803fe3cb58 (k-slock-AF_INET){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] ffff88803fe3cb58 (k-slock-AF_INET){+.-.}-{2:2}, at: sk_clone_lock+0x2cd/0xf40 net/core/sock.c:2328 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(k-slock-AF_INET); lock(k-slock-AF_INET); *** DEADLOCK *** May be due to missing lock nesting notation 7 locks held by syz-executor364/5113: #0: ffff8880449f0e18 (sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1607 [inline] #0: ffff8880449f0e18 (sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_sendmsg+0x153/0x1b10 net/mptcp/protocol.c:1806 #1: ffff88803fe39ad8 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1607 [inline] #1: ffff88803fe39ad8 (k-sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_sendmsg_fastopen+0x11f/0x530 net/mptcp/protocol.c:1727 #2: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:326 [inline] #2: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:838 [inline] #2: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: __ip_queue_xmit+0x5f/0x1b80 net/ipv4/ip_output.c:470 #3: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:326 [inline] #3: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:838 [inline] #3: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: ip_finish_output2+0x45f/0x1390 net/ipv4/ip_output.c:228 #4: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: local_lock_acquire include/linux/local_lock_internal.h:29 [inline] #4: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: process_backlog+0x33b/0x15b0 net/core/dev.c:6104 #5: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_lock_acquire include/linux/rcupdate.h:326 [inline] #5: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: rcu_read_lock include/linux/rcupdate.h:838 [inline] #5: ffffffff8e938320 (rcu_read_lock){....}-{1:2}, at: ip_local_deliver_finish+0x230/0x5f0 net/ipv4/ip_input.c:232 #6: ffff88803fe3cb58 (k-slock-AF_INET){+.-.}-{2:2}, at: spin_lock include/linux/spinlock.h:351 [inline] #6: ffff88803fe3cb58 (k-slock-AF_INET){+.-.}-{2:2}, at: sk_clone_lock+0x2cd/0xf40 net/core/sock.c:2328 stack backtrace: CPU: 0 UID: 0 PID: 5113 Comm: syz-executor364 Not tainted 6.11.0-rc6-syzkaller-00019-g67784a74e258 #0 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 check_deadlock kernel/locking/lockdep.c:3061 [inline] validate_chain+0x15d3/0x5900 kernel/locking/lockdep.c:3855 __lock_acquire+0x137a/0x2040 kernel/locking/lockdep.c:5142 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5759 __raw_spin_lock include/linux/spinlock_api_smp.h:133 [inline] _raw_spin_lock+0x2e/0x40 kernel/locking/spinlock.c:154 spin_lock include/linux/spinlock.h:351 [inline] sk_clone_lock+0x2cd/0xf40 net/core/sock.c:2328 mptcp_sk_clone_init+0x32/0x13c0 net/mptcp/protocol.c:3279 subflow_syn_recv_sock+0x931/0x1920 net/mptcp/subflow.c:874 tcp_check_req+0xfe4/0x1a20 net/ipv4/tcp_minisocks.c:853 tcp_v4_rcv+0x1c3e/0x37f0 net/ipv4/tcp_ipv4.c:2267 ip_protocol_deliver_rcu+0x22e/0x440 net/ipv4/ip_input.c:205 ip_local_deliver_finish+0x341/0x5f0 net/ipv4/ip_input.c:233 NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314 NF_HOOK+0x3a4/0x450 include/linux/netfilter.h:314 __netif_receive_skb_one_core net/core/dev.c:5661 [inline] __netif_receive_skb+0x2bf/0x650 net/core/dev.c:5775 process_backlog+0x662/0x15b0 net/core/dev.c:6108 __napi_poll+0xcb/0x490 net/core/dev.c:6772 napi_poll net/core/dev.c:6841 [inline] net_rx_action+0x89b/0x1240 net/core/dev.c:6963 handle_softirqs+0x2c4/0x970 kernel/softirq.c:554 do_softirq+0x11b/0x1e0 kernel/softirq.c:455 </IRQ> <TASK> __local_bh_enable_ip+0x1bb/0x200 kernel/softirq.c:382 local_bh_enable include/linux/bottom_half.h:33 [inline] rcu_read_unlock_bh include/linux/rcupdate.h:908 [inline] __dev_queue_xmit+0x1763/0x3e90 net/core/dev.c:4450 dev_queue_xmit include/linux/netdevice.h:3105 [inline] neigh_hh_output include/net/neighbour.h:526 [inline] neigh_output include/net/neighbour.h:540 [inline] ip_finish_output2+0xd41/0x1390 net/ipv4/ip_output.c:235 ip_local_out net/ipv4/ip_output.c:129 [inline] __ip_queue_xmit+0x118c/0x1b80 net/ipv4/ip_output.c:535 __tcp_transmit_skb+0x2544/0x3b30 net/ipv4/tcp_output.c:1466 tcp_rcv_synsent_state_process net/ipv4/tcp_input.c:6542 [inline] tcp_rcv_state_process+0x2c32/0x4570 net/ipv4/tcp_input.c:6729 tcp_v4_do_rcv+0x77d/0xc70 net/ipv4/tcp_ipv4.c:1934 sk_backlog_rcv include/net/sock.h:1111 [inline] __release_sock+0x214/0x350 net/core/sock.c:3004 release_sock+0x61/0x1f0 net/core/sock.c:3558 mptcp_sendmsg_fastopen+0x1ad/0x530 net/mptcp/protocol.c:1733 mptcp_sendmsg+0x1884/0x1b10 net/mptcp/protocol.c:1812 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x1a6/0x270 net/socket.c:745 ____sys_sendmsg+0x525/0x7d0 net/socket.c:2597 ___sys_sendmsg net/socket.c:2651 [inline] __sys_sendmmsg+0x3b2/0x740 net/socket.c:2737 __do_sys_sendmmsg net/socket.c:2766 [inline] __se_sys_sendmmsg net/socket.c:2763 [inline] __x64_sys_sendmmsg+0xa0/0xb0 net/socket.c:2763 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f04fb13a6b9 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 01 1a 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffd651f42d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f04fb13a6b9 RDX: 0000000000000001 RSI: 0000000020000d00 RDI: 0000000000000004 RBP: 00007ffd651f4310 R08: 0000000000000001 R09: 0000000000000001 R10: 0000000020000080 R11: 0000000000000246 R12: 00000000000f4240 R13: 00007f04fb187449 R14: 00007ffd651f42f4 R15: 00007ffd651f4300 </TASK> As noted by Cong Wang, the splat is false positive, but the code path leading to the report is an unexpected one: a client is attempting an MPC handshake towards the in-kernel listener created by the in-kernel PM for a port based signal endpoint. Such connection will be never accepted; many of them can make the listener queue full and preventing the creation of MPJ subflow via such listener - its intended role. Explicitly detect this scenario at initial-syn time and drop the incoming MPC request. Fixes: 1729cf1 ("mptcp: create the listening socket for new port") Cc: stable@vger.kernel.org Reported-by: syzbot+f4aacdfef2c6a6529c3e@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=f4aacdfef2c6a6529c3e Cc: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20241014-net-mptcp-mpc-port-endp-v2-1-7faea8e6b6ae@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>

…/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.12, take #2 - Fix the guest view of the ID registers, making the relevant fields writable from userspace (affecting ID_AA64DFR0_EL1 and ID_AA64PFR1_EL1) - Correcly expose S1PIE to guests, fixing a regression introduced in 6.12-rc1 with the S1POE support - Fix the recycling of stage-2 shadow MMUs by tracking the context (are we allowed to block or not) as well as the recycling state - Address a couple of issues with the vgic when userspace misconfigures the emulation, resulting in various splats. Headaches courtesy of our Syzkaller friends

Fix possible use-after-free in 'taprio_dump()' by adding RCU read-side critical section there. Never seen on x86 but found on a KASAN-enabled arm64 system when investigating https://syzkaller.appspot.com/bug?extid=b65e0af58423fc8a73aa: [T15862] BUG: KASAN: slab-use-after-free in taprio_dump+0xa0c/0xbb0 [T15862] Read of size 4 at addr ffff0000d4bb88f8 by task repro/15862 [T15862] [T15862] CPU: 0 UID: 0 PID: 15862 Comm: repro Not tainted 6.11.0-rc1-00293-gdefaf1a2113a-dirty #2 [T15862] Hardware name: QEMU QEMU Virtual Machine, BIOS edk2-20240524-5.fc40 05/24/2024 [T15862] Call trace: [T15862] dump_backtrace+0x20c/0x220 [T15862] show_stack+0x2c/0x40 [T15862] dump_stack_lvl+0xf8/0x174 [T15862] print_report+0x170/0x4d8 [T15862] kasan_report+0xb8/0x1d4 [T15862] __asan_report_load4_noabort+0x20/0x2c [T15862] taprio_dump+0xa0c/0xbb0 [T15862] tc_fill_qdisc+0x540/0x1020 [T15862] qdisc_notify.isra.0+0x330/0x3a0 [T15862] tc_modify_qdisc+0x7b8/0x1838 [T15862] rtnetlink_rcv_msg+0x3c8/0xc20 [T15862] netlink_rcv_skb+0x1f8/0x3d4 [T15862] rtnetlink_rcv+0x28/0x40 [T15862] netlink_unicast+0x51c/0x790 [T15862] netlink_sendmsg+0x79c/0xc20 [T15862] __sock_sendmsg+0xe0/0x1a0 [T15862] ____sys_sendmsg+0x6c0/0x840 [T15862] ___sys_sendmsg+0x1ac/0x1f0 [T15862] __sys_sendmsg+0x110/0x1d0 [T15862] __arm64_sys_sendmsg+0x74/0xb0 [T15862] invoke_syscall+0x88/0x2e0 [T15862] el0_svc_common.constprop.0+0xe4/0x2a0 [T15862] do_el0_svc+0x44/0x60 [T15862] el0_svc+0x50/0x184 [T15862] el0t_64_sync_handler+0x120/0x12c [T15862] el0t_64_sync+0x190/0x194 [T15862] [T15862] Allocated by task 15857: [T15862] kasan_save_stack+0x3c/0x70 [T15862] kasan_save_track+0x20/0x3c [T15862] kasan_save_alloc_info+0x40/0x60 [T15862] __kasan_kmalloc+0xd4/0xe0 [T15862] __kmalloc_cache_noprof+0x194/0x334 [T15862] taprio_change+0x45c/0x2fe0 [T15862] tc_modify_qdisc+0x6a8/0x1838 [T15862] rtnetlink_rcv_msg+0x3c8/0xc20 [T15862] netlink_rcv_skb+0x1f8/0x3d4 [T15862] rtnetlink_rcv+0x28/0x40 [T15862] netlink_unicast+0x51c/0x790 [T15862] netlink_sendmsg+0x79c/0xc20 [T15862] __sock_sendmsg+0xe0/0x1a0 [T15862] ____sys_sendmsg+0x6c0/0x840 [T15862] ___sys_sendmsg+0x1ac/0x1f0 [T15862] __sys_sendmsg+0x110/0x1d0 [T15862] __arm64_sys_sendmsg+0x74/0xb0 [T15862] invoke_syscall+0x88/0x2e0 [T15862] el0_svc_common.constprop.0+0xe4/0x2a0 [T15862] do_el0_svc+0x44/0x60 [T15862] el0_svc+0x50/0x184 [T15862] el0t_64_sync_handler+0x120/0x12c [T15862] el0t_64_sync+0x190/0x194 [T15862] [T15862] Freed by task 6192: [T15862] kasan_save_stack+0x3c/0x70 [T15862] kasan_save_track+0x20/0x3c [T15862] kasan_save_free_info+0x4c/0x80 [T15862] poison_slab_object+0x110/0x160 [T15862] __kasan_slab_free+0x3c/0x74 [T15862] kfree+0x134/0x3c0 [T15862] taprio_free_sched_cb+0x18c/0x220 [T15862] rcu_core+0x920/0x1b7c [T15862] rcu_core_si+0x10/0x1c [T15862] handle_softirqs+0x2e8/0xd64 [T15862] __do_softirq+0x14/0x20 Fixes: 18cdd2f ("net/sched: taprio: taprio_dump and taprio_change are protected by rtnl_mutex") Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru> Link: https://patch.msgid.link/20241018051339.418890-2-dmantipov@yandex.ru Signed-off-by: Paolo Abeni <pabeni@redhat.com>

Hou Tao says: ==================== Add the missing BPF_LINK_TYPE invocation for sockmap From: Hou Tao <houtao1@huawei.com> Hi, The tiny patch set fixes the out-of-bound read problem when reading the fdinfo of sock map link fd. And in order to spot such omission early for the newly-added link type in the future, it also checks the validity of the link->type and adds a WARN_ONCE() for missed invocation. Please see individual patches for more details. And comments are always welcome. v3: * patch #2: check and warn the validity of link->type instead of adding a static assertion for bpf_link_type_strs array. v2: http://lore.kernel.org/bpf/d49fa2f4-f743-c763-7579-c3cab4dd88cb@huaweicloud.com ==================== Link: https://lore.kernel.org/r/20241024013558.1135167-1-houtao@huaweicloud.com Signed-off-by: Andrii Nakryiko <andrii@kernel.org>

rddunlap and others added 30 commits December 6, 2017 14:55

x86/PCI: Fix infinite loop in search for 64bit BAR placement

470195f

Break the loop if we can't find some address space for a 64bit BAR. Signed-off-by: Christian König <christian.koenig@amd.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

ptr_ring: fix up after recent ptr_ring changes

5790eab

Add more stubs to make it build. Fixes: 81fbfe8 ("ptr_ring: use kmalloc_array()") Signed-off-by: Michael S. Tsirkin <mst@redhat.com>

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

4.15.rc4 #2

4.15.rc4 #2

frank-w commented Dec 18, 2017

4.15.rc4 #2

4.15.rc4 #2

Conversation

frank-w commented Dec 18, 2017