libfranka is a C++ library that provides low-level control of Franka Robotics research robots. The generated API documentation offers an overview of its capabilities, while the Franka Control Interface (FCI) documentation provides more information on setting up the robot and utilizing its features and functionalities.
To find the appropriate version to use, please refer to the Compatibility Matrix.
- Low-level control: Access precise motion control for research robots.
- Real-time communication: Interact with the robot in real-time.
Before using libfranka, ensure your system meets the following requirements:
- Operating System: Linux with PREEMPT_RT patched kernel (Ubuntu 16.04 or later, Ubuntu 22.04 recommended)
- Compiler: GCC 7 or later
- CMake: Version 3.10 or later
- Robot: Franka Robotics robot with FCI feature installed
sudo apt-get update
sudo apt-get install -y \
build-essential \
cmake \
git \
libpoco-dev \
libeigen3-dev \
dpkg
To use libfranka version 0.14.0
or later, you will need to install pinocchio and some more dependencies:
sudo apt-get install -y \
liburdfdom-headers-dev \
libconsole-bridge-dev \
libtinyxml2-dev
sudo apt-get install -qqy lsb-release curl
mkdir -p /etc/apt/keyrings
curl http://robotpkg.openrobots.org/packages/debian/robotpkg.asc \
| sudo tee /etc/apt/keyrings/robotpkg.asc
echo "deb [arch=amd64 signed-by=/etc/apt/keyrings/robotpkg.asc] http://robotpkg.openrobots.org/packages/debian/pub $(lsb_release -cs) robotpkg" \
| sudo tee /etc/apt/sources.list.d/robotpkg.list
sudo apt-get update \
&& sudo apt-get install -qqy robotpkg-pinocchio
Before building and installing from source, please uninstall existing installations of libfranka to avoid conflicts:
sudo apt remove "*libfranka*"
You can clone the repository and choose the version you need by selecting a specific tag:
# Clone the repository
git clone --recursive https://github.com/frankaemika/libfranka.git
cd libfranka
# List available tags
git tag -l
# Checkout a specific tag (e.g., 0.14.1)
git checkout 0.14.1
# Update submodules
git submodule update
# Create a build directory and navigate to it
mkdir build
cd build
# You may encounter problems during the cmake configure process
# without first setting:
export CMAKE_PREFIX_PATH=/opt/openrobots/lib/cmake # for pinocchio, etc...
# or as a parameter to cmake explicitely.
# Configure the project and build
cmake -DCMAKE_BUILD_TYPE=Release -DBUILD_TESTS=OFF [-DCMAKE_PREFIX_PATH=/opt/openrobots/lib/cmake] ..
cmake --build .
Building a Debian package is optional but recommended for easier installation and management. In the build folder, execute:
cpack -G DEB
This command creates a Debian package named libfranka--.deb. You can then install it with:
sudo dpkg -i libfranka*.deb
Installing via a Debian package simplifies the process compared to building from source every time. Additionally the package integrates better with system tools and package managers, which can help manage updates and dependencies more effectively.
After installation, check the Minimum System and Network Requirements for network settings, the Operating System and PC Configuration for system setup, and the Getting Started Manual for initial steps. Once configured, you can control the robot using the example applications provided in the examples folder.
To run a sample program, navigate to the build folder and execute the following command:
./examples/communication_test <robot-ip>
libfranka
is licensed under the Apache 2.0 license.