Copyright 2018-2020 Freetronics Pty Ltd www.freetronics.com
Pick and place feeder controller for DIY feeders. Compatible with the 0816 feeders designed by MGRL:
https://docs.mgrl.de/maschine:pickandplace:feeder:0816feeder
These feeders are commonly used with DIY pick and place machines running OpenPNP:
Run the MGRL feeder control firmware.
Adds an I2C display that can be used for reporting events and part counts.
Uses 10-way IDC cables to connect batches of 4 feeders. Mates to the MGRL0816 Feeder Link board, which bridges across the 4-pin connections on 4 feeders mounted side by side.
Features:
- 24 feeder outputs
- PWM output and feedback input
- GND and 5V supply to feeders
- Software controlled feeder power
- 128x32 OLED
You can view more online at:
http://www.freetronics.com.au/fsm
The design is saved as an EAGLE project. EAGLE PCB design software is available from www.cadsoftusa.com free for non-commercial use. To use this project download it and place the directory containing these files into the "eagle" directory on your computer. Then open EAGLE and navigate to the project.
The specific terms of distribution of this project are governed by the license referenced below.
Licensed under the TAPR Open Hardware License (www.tapr.org/OHL). The "license" folder within this repository also contains a copy of this license in plain text format.