docs: Add v2022.1.4 release notes

README.md

@@ -30,7 +30,7 @@ the future development of Gluon.
 
 Please refrain from using the `master` branch for anything else but development purposes!
 Use the most recent release instead. You can list all releases by running `git tag`
-and switch to one by running `git checkout v2022.1.3 && make update`.
+and switch to one by running `git checkout v2022.1.4 && make update`.
 
 If you're using the autoupdater, do not autoupdate nodes with anything but releases.
 If you upgrade using random master commits the nodes *might break* eventually.

contrib/ci/minimal-site/site.conf

@@ -1,4 +1,4 @@
--- This is an example site configuration for Gluon v2022.1.3
+-- This is an example site configuration for Gluon v2022.1.4
 --
 -- Take a look at the documentation located at
 -- https://gluon.readthedocs.io/ for details.

docs/conf.py

@@ -24,7 +24,7 @@
 author = 'Project Gluon'
 
 # The short X.Y version
-version = '2022.1.3'
+version = '2022.1.4'
 # The full version, including alpha/beta/rc tags
 release = version
 

docs/releases/index.rst

@@ -5,6 +5,7 @@ Release Notes
    :caption: Gluon 2022.1
    :maxdepth: 2
 
+   v2022.1.4
    v2022.1.3
    v2022.1.2
    v2022.1.1

docs/releases/v2022.1.4.rst

@@ -0,0 +1,136 @@
+Gluon 2022.1.4
+==============
+
+Added hardware support
+----------------------
+
+ath79-generic
+~~~~~~~~~~~~~
+
+- LibreRouter
+
+  - LibreRouter (v1)
+
+- Teltonika
+
+  - RUT230 (v1)
+
+
+ath79-nand
+~~~~~~~~~~
+
+- Aerohive
+
+  - HiveAP 121
+
+- NETGEAR
+
+  - WNDR4300 (v1)
+
+
+lantiq-xrx200
+~~~~~~~~~~~~~
+
+- Arcadyan
+
+  - o2 Box 6431
+
+
+ramips-mt7621
+~~~~~~~~~~~~~
+
+- Cudy
+
+  - X6 (v1, v2)
+
+- D-Link
+
+  - DAP-X1860 (A1)
+
+- GL.iNet
+
+  - GL-MT1300
+
+- Mercusys
+
+  - MR70X (v1)
+
+- Xiaomi
+
+  - Mi Router 3G
+
+
+ramips-mt76x8
+~~~~~~~~~~~~~
+
+- TP-Link
+
+  - RE200 (v3)
+
+
+realtek-rtl838x
+~~~~~~~~~~~~~~~
+
+- D-Link
+
+  - DGS-1210-10P
+
+
+ipq40xx-generic
+~~~~~~~~~~~~~~~
+
+- AVM
+
+  - FRITZBox 7520
+
+
+ipq40xx-mikrotik
+~~~~~~~~~~~~~~~~
+
+- Mikrotik
+
+  - hAP ac2
+
+
+Bugfixes
+--------
+
+* Enterasys WS-AP3705i now uses the correct image-name for use with the autoupdater
+  (`#2819 <https://github.com/freifunk-gluon/gluon/issues/2819>`_)
+
+* Reduce memory Usage for ath10k on ZyXEL WRE6606 devices
+  (`#2842 <https://github.com/freifunk-gluon/gluon/issues/2842>`_)
+
+* Replace the Workaround for failed boots on ath79 with a proper fix.
+  (`#2784 <https://github.com/freifunk-gluon/gluon/issues/2784#issuecomment-1452126501>`_)
+
+* AVM FRITZ!Box 7360 v2 flashed with the incorrect image for v1 will automatically update to the correct image.
+
+* Revert OOM inducing switch of ath79 Wave2 firmware back to -ct
+  (`#2879 <https://github.com/freifunk-gluon/gluon/pull/2879>`_)
+
+Known issues
+------------
+
+* Upgrading EdgeRouter-X from versions before v2020.1.x may lead to a soft-bricked state due to bad blocks on the NAND flash which the NAND driver before this release does not handle well.
+  (`#1937 <https://github.com/freifunk-gluon/gluon/issues/1937>`_)
+
+* The integration of the BATMAN_V routing algorithm is incomplete.
+
+  - Mesh neighbors don't appear on the status page. (`#1726 <https://github.com/freifunk-gluon/gluon/issues/1726>`_)
+    Many tools have the BATMAN_IV metric hardcoded, these need to be updated to account for the new throughput
+    metric.
+  - Throughput values are not correctly acquired for different interface types.
+    (`#1728 <https://github.com/freifunk-gluon/gluon/issues/1728>`_)
+    This affects virtual interface types like bridges and VXLAN.
+
+* Default TX power on many Ubiquiti devices is too high, correct offsets are unknown
+  (`#94 <https://github.com/freifunk-gluon/gluon/issues/94>`_)
+
+  Reducing the TX power in the Advanced Settings is recommended.
+
+* In configurations without VXLAN, the MAC address of the WAN interface is modified even when Mesh-on-WAN is disabled
+  (`#496 <https://github.com/freifunk-gluon/gluon/issues/496>`_)
+
+  This may lead to issues in environments where a fixed MAC address is expected (like VMware when promiscuous mode is disallowed).
+

docs/site-example/site.conf

@@ -1,4 +1,4 @@
--- This is an example site configuration for Gluon v2022.1.3
+-- This is an example site configuration for Gluon v2022.1.4
 --
 -- Take a look at the documentation located at
 -- https://gluon.readthedocs.io/ for details.

docs/user/getting_started.rst

@@ -8,7 +8,7 @@ Gluon's releases are managed using `Git tags`_. If you are just getting
 started with Gluon we recommend to use the latest stable release of Gluon.
 
 Take a look at the `list of gluon releases`_ and notice the latest release,
-e.g. *v2022.1.3*. Always get Gluon using git and don't try to download it
+e.g. *v2022.1.4*. Always get Gluon using git and don't try to download it
 as a Zip archive as the archive will be missing version information.
 
 Please keep in mind that there is no "default Gluon" build; a site configuration
@@ -50,7 +50,7 @@ Building the images
 -------------------
 
 To build Gluon, first check out the repository. Replace *RELEASE* with the
-version you'd like to checkout, e.g. *v2022.1.3*.
+version you'd like to checkout, e.g. *v2022.1.4*.
 
 ::