OpenCore EFI for Intel Hackintosh (macOS 10.13 - 14.0)

Specification

Component	Model
CPU	Intel i7-4770 (8) @ 3.40GHz
Motherboard	GA-B85M-D3H
RAM	20GB (3 x 4GB - 1 x 8GB) Corsair @ 1333MHz
Audio Chipset	ALC892
GPU	Intel HD Graphics 4600
OS Disk (HDD)	ST1000LX015-1U7172 (1TB)
macOS	14.0 (23A344)

macOS version: 14.0 (23A344) OpenCore version: 0.9.6

I'm using OpenCore Legacy Patcher to install iGPU drivers

Credits

• [Bootloader] OpenCore
• [Driver] OpenRuntime
• [Driver] HFSPlus
• [Kext] Lilu
• [Kext] VirtualSMC
• [Kext] WhateverGreen
• [Kext] AppleALC

Compatible macOS versions

• High Sierra (10.13.x)
• Mojave (10.14.x)
• Catalina (10.15.x)
• Big Sur (10.16/11.4)
• Monterey (12.1)
• Ventura (13.0/13.5)
• Sonoma (14.0)

How to use

1. Make your USB installer with this guide
2. Clone the repository and paste "BOOT" and "OC" directories into your's pendrive "EFI" folder
3. Download GenSMBIOS to generate unique SMBIOS information. Run it and select Generate SMBIOS, as the model select iMacPro1,1.
4. Open config.plist with ProperTree and go to PlatformInfo > Generic. Set MLB (Board Serial), SystemSerialNumber (Serial) and SystemUUID (SmUUID) to generated values. Change ROM to your network card's MAC address without the : character. How to get MAC Address?
5. Boot it!

You CAN NOT use SMBIOS from this repository, it MUST be unique for every macOS installation

Other guides

If you have any problems with installation or booting your macOS, kernel panics or another system related issue check OC configuration guide
If something else isn't working properly (for example USB ports, iServices, DRM/Netflix) check Post-Install guide

• Creating USB installer: *click*
• OpenCore configuration: *click*
• Post-Install: *click*
• Troubleshooting: *click*
• ACPI patching: *click*
• USB mapping: *click*

Author

Maia