-
Notifications
You must be signed in to change notification settings - Fork 37
Playbooks Wiki
Housed in the venduino laser cut wood case there are 5 buttons (4 on the front one on the back), 12 RGB LEDs, 4 continuous rotation servos, an Adafruit servo driver board, a Nokia LCD and a USB CM108 microphone.
The playbook will prompt you for the following items during setup:
- Amazon ProductID
- Amazon ClientID
- Amazon ClientSecret
This playbook will:
- Update and Upgrade apt packages
- Configure boot/config.txt values
- Download build and install various required libraries for the screen, lights and servos
- Download and configure with prompt data the Amazon Alexa setup script
Playbook to set up an AstroPi, this playbook will complete all the steps in the software setup from the tutorial this script will:
- Update and Upgrade apt packages
- Configure boot/config.txt values
- Download the astropi-keys.dtbo file
- Download astro pi python test file
You can run the playbook with the following command:
ansible-playbook -i ~/ansible/hosts playbooks/setup-astropi.yml
Clusterhat Nodes - Node Images downloaded from ClusterHat.com
Playbook to update nodes in the Clusterhat after writing the SD card, this script will:
- Expand the filesystem
- Set Internationalization Options
- Update and Upgrade apt packages
You can run the playbook with the following command:
ansible-playbook -i ~/ansible/hosts playbooks/setup-clusterhat-nodes.yml
- Update and Upgrade apt packages
- Configure option values in /boot/config.txt file.
- Audio
- GPU Memory Split
- HDMI Screen Settings
- Configure option values in /etc/rc.local file.
You can run the playbook with the following command:
ansible-playbook -i ~/ansible/hosts playbooks/setup-mini-snes.yml
Installs motion dependancies and installs the raspberry pi specific motion binary.
You can run the playbook with the following command:
ansible-playbook -i ~/ansible/hosts playbooks/setup-camera-motion.yml
Complete setup playbook for the Pi-Cade.
- Update and Upgrade apt packages
- Configure option values in /boot/config.txt file.
- Audio
- GPU Memory Split
- HDMI Screen Settings
- USB current for screen
- Setup Adafruit Retrogame for GPIO Joystick and buttons
- Download and Install
- Set retrogame permissions
- Put the appropriate retrogame.cfg file in place
- Set up Retrogame UDEV rule
- Configure /etc/rc.local
You can run the playbook with the following command:
ansible-playbook -i ~/ansible/hosts playbooks/setup-retropie-pi-cade.yml
Audio lsusb dmesg | grep C-Media aplay -1 sudo nano /usr/share/alsa/alsa.conf
Runs all of the software steps from the PIX-E Gif Camera tutorial at make.
You can run the playbook with the following command:
ansible-playbook -i ~/ansible/hosts playbooks/setup-camera-pix-e-gif.yml
Complete setup playbook for the Pocket Pigrrl from Adafruit.
- Update and Upgrade apt packages
- Configure option values in /boot/config.txt file.
- Audio
- GPU Memory Split
- Screen Settings
- Setup Adafruit Retrogame for GPIO buttons
- Download and Install
- Set retrogame permissions
- Put the appropriate retrogame.cfg file in place
- Set up Retrogame UDEV rule
- Configure /etc/rc.local
You can run the playbook with the following command:
ansible-playbook -i ~/ansible/hosts playbooks/setup-retropie-pocket-pigrrl.yml
Runs all of the software steps from the hard way in the Wearable Time Lapse Camera tutorial at Adafruit.
You can run the playbook with the following command:
ansible-playbook -i ~/ansible/hosts playbooks/setup-camera-timelapse.yml