Hardware for OctoPod

[cfgroenewald]

Hi
What hardware do I need to add to a SKR pro 1.2 to use this please?

[gdombiak]

Hi @cfgroenewald,

Your BIGTREETECH SKR PRO V1.2 is a great upgrade for your printer! Once you installed it on your printer and flashed latest (and configured) version of Marlin you are ready to install OctoPrint. You will need to get a Raspberry Pi 3 or newer and follow this guide. Once you have OcroPrint running you can then use OctoPod from your iPhone or iPad.

Regards,
Gaston

[cfgroenewald]

Thanks so much Gastron. No to find a Raspberry Pi somewhere.

…

On Mon, 5 Sept 2022 at 17:56, Gaston Dombiak ***@***.***> wrote: Hi @cfgroenewald <https://github.com/cfgroenewald>, Your BIGTREETECH SKR PRO V1.2 is a great upgrade for your printer! Once you installed it on your printer and flashed latest (and configured) version of Marlin you are ready to install OctoPrint. You will need to get a Raspberry Pi 3 or newer and follow this guide <https://octoprint.org/download/>. Once you have OcroPrint running you can then use OctoPod from your iPhone or iPad. Regards, Gaston — Reply to this email directly, view it on GitHub <#603 (comment)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/ARM4T2CEN6F5PI6HZ4W4QADV4YJZZANCNFSM6AAAAAAQFDGP5A> . You are receiving this because you were mentioned.Message ID: ***@***.***>