update from arendst

gemu2015 · Dec 16, 2024 · e67e9b7 · e67e9b7
1 parent c1c650d
commit e67e9b7
Show file tree

Hide file tree

Showing 109 changed files with 4,903 additions and 1,771 deletions.
diff --git a/CHANGELOG.md b/CHANGELOG.md
@@ -3,23 +3,86 @@ All notable changes to this project will be documented in this file.
 
 ## [Unreleased] - Development
 
-## [14.3.0.7] 
+## [14.4.1.1] 
+### Added
+- Command ``SetOption163 1`` to disable display of Device name in GUI header
+
+### Breaking Changed
+
+### Changed
+- ESP32 disable PSRAM check (and on restart some relay toggles) with `#define DISABLE_PSRAMCHECK` (#21266)
+- TLS disable ECDSA for MQTT to ensure we don't break fingerprints after #22649
+
+### Fixed
+
+### Removed
+
+
+## [Released]
+
+## [14.4.1] 20241215
+- Release Rudolph
+
+## [14.4.0.1] 20241215
+### Added
+- MCP23XXX_DRV control register IOCON in template (#22622)
+- ESP32 support for TLS ECDSA (#22649)
+
+### Changed
+- Berry make Leds animate calls reentrant (#22643)
+- SSL clean up remnants of old fingerprint algorithm (#22645)
+- Display removed PWM control of backlight GPIO regression from v14.1.0
+
+### Fixed
+- ESP32 rules operation priority regression from v13.3.0.4 (#22636)
+- GUI display power button regression from v14.3.0.5 (#15788)
+- MCP23xxx, PCF8574 and Shift595 power control when a display is configured regression from v14.3.0.7
+- Display DisplayMode adds a display device while not configured
+- GUI timing related divide by zero exception on screen updates
+
+## [14.4.0] 20241211
+- Release Rudolph
+
+## [14.3.0.7] 20241211
 ### Added
 - Support for TM1640 based IoTTimer by Stefan Oskamp (#21376)
 - Command `SetOption161 1` to disable display of state text (#22515)
+- ESP32 new BLE filters by name and minimum RSSI (#22530)
+- ESP32 Hybrid compile take custom boards settings in account (#22542)
+- ESP32 ULP lp_core to Berry ULP module (#22567)
+- Shelly 1 Gen3 template {"NAME":"Shelly 1 Gen3","GPIO":[0,0,0,4736,0,224,0,0,1,1,192,0,0,0,0,0,0,0,0,576,1,1],"FLAG":0,"BASE":1,"CMND":"AdcGpio3 10000,10000,4000"}
+- Shelly 1PM Gen3 template {"NAME":"Shelly 1PM Gen3","GPIO":[0,32,0,4736,224,0,3200,8161,576,1,192,0,0,0,0,0,0,0,0,1,1,1],"FLAG":0,"BASE":1,"CMND":"AdcGpio3 10000,10000,4000"}
+- Shelly 2PM Gen3 template {"NAME":"Shelly 2PM Gen3","GPIO":[9472,3458,576,225,4736,224,640,608,1,1,193,0,0,0,0,0,0,0,192,32,1,1],"FLAG":0,"BASE":1,"CMND":"AdcGpio4 10000,10000,4000"}
+- Shelly i4 Gen3 template {"NAME":"Shelly i4 Gen3","GPIO":[0,0,0,4736,32,195,194,193,1,1,192,0,0,0,0,0,0,0,0,0,1,1],"FLAG":0,"BASE":1,"CMND":"AdcGpio3 10000,10000,4000}
+- Show Active Power Total with any multi-phase energy monitoring (#22579)
+- Command `SetOption162 1` to disable adding export energy to energy today (#22578)
+- ESP32 support for WPA2/3 Enterprise conditional in core v3.1.0.241206 (#22600)
+- Support for Sonoff POWCT Energy Export Active (#22596)
+- Improved auto-selection of LED hardware support (RMT, SPI) (#22618)
 
 ### Breaking Changed
+- ESP32 ArtNet switches from GRB to RGB encoding (#22556)
 
 ### Changed
 - ESP32 max number of supported switches/buttons/relays from 28 to 32
 - ESP32 max number of interlocks from 14 to 16
 - ESP32 Platform from 2024.11.30 to 2024.11.31, Framework (Arduino Core) from v3.1.0.241030 to v3.1.0.241117 and IDF to 5.3.1.241024 (#22504)
+- Prevent active BLE operations with unencrypted MI-format beacons (#22453)
+- ESP32 replaced NeoPixelBus with TasmotaLED (#22556)
+- ESP32 Platform from 2024.11.31 to 2024.12.30, Framework (Arduino Core) from v3.1.0.241117 to v3.1.0.241206 and IDF to 5.3.2 (#22600)
+- RG-15 sensor name from RG-15 to RG15 (#22612)
 
 ### Fixed
 - ESP32 upgrade by file upload response based on file size (#22500)
 - Wrong GUI Module and Template drop down list indexes regression
-
-### Removed
+- Use HTML escape on File System Edit File load (#22492)
+- Magic switch applying masking window to any power change (#22535)
+- Shift595 output offsets and restart relay toggles
+- Shutter wrong power ON state (#22548)
+- ESP32-C2 TasmotaLED from not present I2S to SPI (#22575)
+- KNX Scenes index change regression from v14.2.0.4 (#22405)
+- Add GUI submenu headers and refresh configuration button text (#22592)
+- ESP8266 Device Group exception due to lack of stack space (#22271)
 
 ## [14.3.0.6] 20241116
 ### Added
@@ -49,6 +112,7 @@ All notable changes to this project will be documented in this file.
 - Support for MS5837 pressure and temperature sensor (#22376)
 - Berry add I2C read16/write16 supporting Little Endian (#22448)
 - Berry drivers for PCA9535 (generic and in SenseCAP D1) (#22451)
+- Shelly DALI Dimmer Gen3 template {"NAME":"Shelly DALI Dimmer Gen3","GPIO":[34,4736,0,3840,11360,11392,128,129,0,1,576,0,0,0,0,0,0,0,0,1,1,1],"FLAG":0,"BASE":1,"CMND":"AdcGpio1 10000,10000,4000}
 
 ### Changed
 - AHT1X/AHT2X/AHT3X ready for virtual I2C (#22427)
@@ -118,8 +182,6 @@ All notable changes to this project will be documented in this file.
 ### Fixed
 - EQ3 TRV firmware version 1.46 fails if the default true is used in subscribe on the notify characteristic (#22328)
 
-## [Released]
-
 ## [14.3.0] 20241015
 - Release Robert
 

diff --git a/FIRMWARE.md b/FIRMWARE.md
@@ -14,11 +14,11 @@ If you like **Tasmota**, give it a star, or fork it and contribute!
 [![GitHub forks](https://img.shields.io/github/forks/arendst/Tasmota.svg?style=social&label=Fork)](https://github.com/arendst/Tasmota/network)
 [![donate](https://img.shields.io/badge/donate-PayPal-blue.svg)](https://paypal.me/tasmota)
 
-See [CHANGELOG.md](https://github.com/arendst/Tasmota/blob/development/tasmota/CHANGELOG.md) for changes since last release.
+See [CHANGELOG.md](https://github.com/arendst/Tasmota/blob/development/CHANGELOG.md) for changes since last release.
 
 ## Development
 
-[![Dev Version](https://img.shields.io/badge/development%20version-v13.2.x.x-blue.svg)](https://github.com/arendst/Tasmota)
+[![Dev Version](https://img.shields.io/badge/development%20version-v14.4.x.x-blue.svg)](https://github.com/arendst/Tasmota)
 [![Download Dev](https://img.shields.io/badge/download-development-yellow.svg)](http://ota.tasmota.com/tasmota/)
 [![Tasmota CI](https://github.com/arendst/Tasmota/workflows/Tasmota%20CI/badge.svg)](https://github.com/arendst/Tasmota/actions?query=workflow%3A%22Tasmota+CI%22)
 [![Tasmota ESP32 CI](https://github.com/arendst/Tasmota/workflows/Tasmota%20ESP32%20CI/badge.svg)](https://github.com/arendst/Tasmota/actions?query=workflow%3A%22Tasmota+ESP32+CI%22)

diff --git a/RELEASENOTES.md b/RELEASENOTES.md
@@ -36,9 +36,9 @@ While fallback or downgrading is common practice it was never supported due to S
 
 This release will be supported from ESP8266/Arduino library Core version **2.7.8** due to reported security and stability issues on previous Core version. This will also support gzipped binaries.
 
-This release will be supported from ESP32/Arduino library Core version **v3.1.0.240926**.
+This release will be supported from ESP32/Arduino library Core version **v3.1.0.241206**.
 
-Support of ESP8266 Core versions before 2.7.8 and ESP32 Core versions before v3.1.0.240926 have been removed.
+Support of ESP8266 Core versions before 2.7.8 and ESP32 Core versions before v3.1.0.241206 have been removed.
 
 ## Support of TLS
 
@@ -75,12 +75,12 @@ Latest released binaries can be downloaded from
 - http://ota.tasmota.com/tasmota/release
 
 Historical binaries can be downloaded from
-- http://ota.tasmota.com/tasmota/release-14.3.0
+- http://ota.tasmota.com/tasmota/release-14.4.1
 
 The latter links can be used for OTA upgrades too like ``OtaUrl http://ota.tasmota.com/tasmota/release/tasmota.bin.gz``
 
 ### ESP32, ESP32-C2, ESP32-C3, ESP32-C6, ESP32-S2 and ESP32-S3 based
-The following binary downloads have been compiled with ESP32/Arduino library core version **v3.1.0.240926**.
+The following binary downloads have been compiled with ESP32/Arduino library core version **v3.1.0.241206**.
 
 - **tasmota32.bin** = The Tasmota version with most drivers including additional sensors and KNX for 4M+ flash.  **RECOMMENDED RELEASE BINARY**
 - **tasmota32solo1.bin** = The Tasmota version with most drivers including additional sensors and KNX for single core ESP32 and 4M+ flash.
@@ -104,7 +104,7 @@ Latest released binaries can be downloaded from
 - https://ota.tasmota.com/tasmota32/release
 
 Historical binaries can be downloaded from
-- https://ota.tasmota.com/tasmota32/release-14.3.0
+- https://ota.tasmota.com/tasmota32/release-14.4.1
 
 The latter links can be used for OTA upgrades too like ``OtaUrl https://ota.tasmota.com/tasmota32/release/tasmota32.bin``
 
@@ -114,67 +114,15 @@ The latter links can be used for OTA upgrades too like ``OtaUrl https://ota.tasm
 
 [Complete list](BUILDS.md) of available feature and sensors.
 
-## Changelog v14.3.0.7
+## Changelog v14.4.1.1
 ### Added
-- Command `WebColor20` to control color of Button when Off
-- Command `SetOption161 1` to disable display of state text (#22515)
-- DALI support for short addresses (gear) and groups
-- DALI command `DaliGear` to set max found gear to speed up scan response
-- DALI command `DaliGroup` to add gear to groups
-- DALI command `DaliTarget` to set light control broadcast, group number or gear number
-- DALI command `DaliGroupSliders 0..16` to show GUI group sliders with feedback disabling `DaliLight`
-- DALI inverted signal configuration using GPIO DALI RX_i/TX_i
-- Support for I2C over Serial [#22444](https://github.com/arendst/Tasmota/issues/22444)
-- Support KNX for scripts [#22429](https://github.com/arendst/Tasmota/issues/22429)
-- Support deep sleep (standby) for VL53L0X [#22441](https://github.com/arendst/Tasmota/issues/22441)
-- Support for Shelly DALI Dimmer Gen3
-- Support for HLK-LD2410S 24GHz smart wave motion sensor [#22253](https://github.com/arendst/Tasmota/issues/22253)
-- Support for US AQI and EPA AQI in PMS5003x sensors [#22294](https://github.com/arendst/Tasmota/issues/22294)
-- Support for MS5837 pressure and temperature sensor [#22376](https://github.com/arendst/Tasmota/issues/22376)
-- Support for TM1640 based IoTTimer by Stefan Oskamp [#21376](https://github.com/arendst/Tasmota/issues/21376)
-- HLK-LD2410 Engineering mode [#21880](https://github.com/arendst/Tasmota/issues/21880)
-- Mitsubishi Electric HVAC Operation time for MiElHVAC [#22334](https://github.com/arendst/Tasmota/issues/22334)
-- Mitsubishi Electric HVAC Outdoor Temperature for MiElHVAC [#22345](https://github.com/arendst/Tasmota/issues/22345)
-- Mitsubishi Electric HVAC Compressor Frequency for MiElHVAC [#22347](https://github.com/arendst/Tasmota/issues/22347)
-- Mitsubishi Electric HVAC Auto Clear Remote Temp for MiElHVAC [#22370](https://github.com/arendst/Tasmota/issues/22370)
-- SolaxX1 Meter mode [#22330](https://github.com/arendst/Tasmota/issues/22330)
-- ESP32 MI32 legacy add config operations [#22458](https://github.com/arendst/Tasmota/issues/22458)
-- BLE track devices with RPA [#22300](https://github.com/arendst/Tasmota/issues/22300)
-- Berry add I2C read16/write16 supporting Little Endian [#22448](https://github.com/arendst/Tasmota/issues/22448)
-- Berry drivers for PCA9535 (generic and in SenseCAP D1) [#22451](https://github.com/arendst/Tasmota/issues/22451)
-- HASPmota `haspmota.get_pages()` to get the sorted list of pages [#22358](https://github.com/arendst/Tasmota/issues/22358)
+- Command ``SetOption163 1`` to disable display of Device name in GUI header
 
 ### Breaking Changed
 
 ### Changed
-- ESP32 Platform from 2024.09.30 to 2024.11.31, Framework (Arduino Core) from v3.1.0.240926 to v3.1.0.241117 and IDF to 5.3.1.241024 [#22504](https://github.com/arendst/Tasmota/issues/22504)
-- ESP32 LVGL library from v9.2.0 to v9.2.2 [#22385](https://github.com/arendst/Tasmota/issues/22385)
-- Redesign GUI adding feedback to buttons, shutters and lights
-- Use command `WebButton1` to change GUI shutter 1 name
-- Unit (k)VAr(h) to (k)var(h) [#22435](https://github.com/arendst/Tasmota/issues/22435)
-- AHT1X/AHT2X/AHT3X ready for virtual I2C [#22427](https://github.com/arendst/Tasmota/issues/22427)
-- SGP4X ready for virtual I2C [#22427](https://github.com/arendst/Tasmota/issues/22427)
-- SCD40 reduce logging levels [#22443](https://github.com/arendst/Tasmota/issues/22443)
-- SCD40 ready for virtual I2C [#22443](https://github.com/arendst/Tasmota/issues/22443)
-- Refactored `i2c_enabled` as array [#22387](https://github.com/arendst/Tasmota/issues/22387)
-- DALI renamed commands `DaliCommission` to `DaliScan` and `DaliWeb` to `DaliLight`
-- DALI set Tasmota light control as default
-- Shutter optimized behavior to publish shutter data with sensor request [#22353](https://github.com/arendst/Tasmota/issues/22353)
-- ESP32 max number of supported switches/buttons/relays from 28 to 32
-- ESP32 max number of interlocks from 14 to 16
-- HASPmota support for page delete and object updates [#22311](https://github.com/arendst/Tasmota/issues/22311)
+- ESP32 disable PSRAM check (and on restart some relay toggles) with `#define DISABLE_PSRAMCHECK` [#21266](https://github.com/arendst/Tasmota/issues/21266)
 
 ### Fixed
-- FUNC_COMMAND linked list command buffer corruption by shutter driver
-- Prevent crashing when `display.ini` is missing end `#` [#22471](https://github.com/arendst/Tasmota/issues/22471)
-- Alexa Hue with multiple devices [#22383](https://github.com/arendst/Tasmota/issues/22383)
-- Mitsubishi Electric HVAC Standby Stage for MiElHVAC [#22430](https://github.com/arendst/Tasmota/issues/22430)
-- EQ3 TRV firmware version 1.46 fails if the default true is used in subscribe on the notify characteristic [#22328](https://github.com/arendst/Tasmota/issues/22328)
-- Ethernet on -DFRAMEWORK_ARDUINO_ITEAD framework regression from v14.3.0 [#22367](https://github.com/arendst/Tasmota/issues/22367)
-- ESP32 Upgrade by file upload response based on file size [#22500](https://github.com/arendst/Tasmota/issues/22500)
-- ESP32 Arduino Core IPv6 zones used by Matter [#22378](https://github.com/arendst/Tasmota/issues/22378)
-- ESP32, ESP32-S2 and ESP32-S3 re-enable touch buttons [#22446](https://github.com/arendst/Tasmota/issues/22446)
-- ESP32-S3 UART output mode for Tx [#22426](https://github.com/arendst/Tasmota/issues/22426)
-- Matter provisioning with matter.js controller [#22470](https://github.com/arendst/Tasmota/issues/22470)
 
 ### Removed
diff --git a/TEMPLATES.md b/TEMPLATES.md
@@ -5,7 +5,7 @@
 
 # Templates
 
-Find below the available templates as of October 2024. More template information can be found in the [Tasmota Device Templates Repository](http://blakadder.github.io/templates)
+Find below the available templates as of December 2024. More template information can be found in the [Tasmota Device Templates Repository](http://blakadder.github.io/templates)
 
 ## Adapter Board
 ```

diff --git a/lib/default/WiFiHelper/src/WiFiHelper_ESP32.cpp b/lib/default/WiFiHelper/src/WiFiHelper_ESP32.cpp
@@ -34,12 +34,14 @@ ip_addr_t dns_save6[DNS_MAX_SERVERS] = {};      // IPv6 DNS servers
 #include "tasmota_options.h"
 #include "lwip/dns.h"
 
+#if CONFIG_ESP_WIFI_ENTERPRISE_SUPPORT
 wl_status_t WiFiHelper::begin(const char *wpa2_ssid, wpa2_auth_method_t method, const char *wpa2_identity, const char *wpa2_username, const char *wpa2_password, const char *ca_pem, const char *client_crt, const char *client_key, int ttls_phase2_type, int32_t channel, const uint8_t *bssid, bool connect) {
   WiFiHelper::scrubDNS();
   wl_status_t ret = WiFi.begin(wpa2_ssid, method, wpa2_identity, wpa2_username, wpa2_password, ca_pem, client_crt, client_key, ttls_phase2_type, channel, bssid, connect);
   WiFiHelper::scrubDNS();
   return ret;
 }
+#endif // CONFIG_ESP_WIFI_ENTERPRISE_SUPPORT
 
 wl_status_t WiFiHelper::begin(const char* ssid, const char *passphrase, int32_t channel, const uint8_t* bssid, bool connect) {
   WiFiHelper::scrubDNS();

diff --git a/lib/lib_basic/NeoPixelBus/src/internal/NeoEsp32RmtMethod_idf5.h b/lib/lib_basic/NeoPixelBus/src/internal/NeoEsp32RmtMethod_idf5.h
@@ -69,7 +69,7 @@ typedef struct {
     rmt_symbol_word_t reset_code;
 } rmt_led_strip_encoder_t;
 
-static size_t rmt_encode_led_strip(rmt_encoder_t *encoder, rmt_channel_handle_t channel, const void *primary_data, size_t data_size, rmt_encode_state_t *ret_state)
+static IRAM_ATTR size_t rmt_encode_led_strip(rmt_encoder_t *encoder, rmt_channel_handle_t channel, const void *primary_data, size_t data_size, rmt_encode_state_t *ret_state)
 {
     rmt_led_strip_encoder_t *led_encoder = __containerof(encoder, rmt_led_strip_encoder_t, base);
     rmt_encoder_handle_t bytes_encoder = led_encoder->bytes_encoder;

diff --git a/lib/lib_basic/TasmotaLED/library.json b/lib/lib_basic/TasmotaLED/library.json
@@ -0,0 +1,17 @@
+{
+    "name": "TasmotaLED",
+    "version": "0.1",
+    "keywords": [
+      "ws2816", "sk6812", "leds"
+    ],
+    "description": "Lightweight implementation for adressable leds.",
+    "repository":
+    {
+        "type": "git",
+        "url": "https://github.com/arendst/Tasmota/lib/lib_basic/TasmotaLED"
+    },
+    "frameworks": "arduino",
+    "platforms": [
+      "espressif32"
+    ]
+}