A docker container with the release version of GNU Radio (3.10 right now) in the latest stable Ubuntu (plus 3.9 and 3.8 versions in Ubuntu 20.04, and a 3.7 version in Ubuntu 18.04)
I have originally prepared these Dockerfiles to be able to migrate my OOT modules to 3.8 and not mess the 3.7 installation of my host PC. The resulting container has the GUI available (so you may use the gnuradio companion and QT widgets) as well as audio. Several packages needed to compile OOTs are also installed and configured.
If you want the release version of GNU Radio (currently 3.10):
- Install docker by following Docker's installation guide (though I've tested this on Ubuntu only, so for convenience a direct link to the corresponding guide for Ubuntu).
- Clone this repo:
git clone https://github.com/git-artes/docker-gnuradio.git
- Enter the
docker-gnuradio/gnuradio-releases
folder and executedocker build -t ubuntu:gnuradio-releases .
(this step is necessary only once, or every time you modify Dockerfile) - Run the container:
docker run --net=host --env="DISPLAY" --volume="$HOME/.Xauthority:/root/.Xauthority:rw" --device /dev/snd -v persistent:/home/gnuradio/persistent --device /dev/dri -v /dev/bus/usb/:/dev/bus/usb/ --privileged --group-add=audio -it ubuntu:gnuradio-releases bash
You will then be in a comand line logged as user gnuradio who is a sudoer (password: gnuradio). The folder persistent in its home directory will persist even after you exit the container. Remember: everything else is erased after you exit the container. This means for instance that if you compile and install an OOT you will have to do that again every time you run the container (unless for instance you compile in the persistent folder). You may modify Dockerfile to avoid this.
The host's USB should be accessible from the docker too, meaning you should be able to use any SDR hardware you plug into the PC.
I've also made a couple of Dockers container for GNU Radio 3.9 and GNU Radio 3.8 (in Ubuntu 20.04), and GNU Radio 3.7 (in Ubuntu 18.04) to check on compatibility issues regarding my OOTs. In the first case, instead of the last two steps above you have to:
If you want GNU Radio 3.9:
- Enter the
docker-gnuradio/gnuradio-releases-39
folder and executedocker build -t ubuntu:gnuradio-releases-3.9 .
(again, this step is only necessary once) - Run the container:
docker run --net=host --env="DISPLAY" --volume="$HOME/.Xauthority:/root/.Xauthority:rw" --privileged -v /dev/bus/usb/:/dev/bus/usb/ --device /dev/snd -v persistent-39:/home/gnuradio/persistent --group-add=audio -it ubuntu:gnuradio-releases-3.9 bash
.
If you want GNU Radio 3.8:
- Enter the
docker-gnuradio/gnuradio-releases-38
folder and executedocker build -t ubuntu:gnuradio-releases-3.8 .
(again, this step is only necessary once) - Run the container:
docker run --net=host --env="DISPLAY" --volume="$HOME/.Xauthority:/root/.Xauthority:rw" --privileged -v /dev/bus/usb/:/dev/bus/usb/ --device /dev/snd -v persistent-38:/home/gnuradio/persistent --group-add=audio -it ubuntu:gnuradio-releases-3.8 bash
.
If you want GNU Radio 3.7:
- Enter the
docker-gnuradio/gnuradio-releases-37
folder and executedocker build -t ubuntu:gnuradio-releases-3.7 .
(again, this step is only necessary once) - Run the container:
docker run --net=host --env="DISPLAY" --volume="$HOME/.Xauthority:/root/.Xauthority:rw" --privileged -v /dev/bus/usb/:/dev/bus/usb/ --device /dev/snd -v persistent-37:/home/gnuradio/persistent --group-add=audio -it ubuntu:gnuradio-releases-3.7 bash
.
In both cases you will end up with the same situation as before. However, they won't share the persistent
folder, as I think it doesn't make sense.
I'm a total newbie using Docker, so feel free to contact me with suggestions. Also, I've mostly tested the 3.8 and 3.7 versions.
Known problems:
- When you
sudo
it may outputsudo: setrlimit(RLIMIT_CORE): Operation not permitted
. You may ignore this. - I've ran into problems with unfound packages during the
apt-get install
part after updating some containers. A quick and dirty solution is to purge all containers throughdocker system prune -a
(warning: you'll eliminate all your previous containers).
IIE Instituto de Ingeniería Eléctrica
Facultad de Ingeniería
Universidad de la República
Montevideo, Uruguay
http://iie.fing.edu.uy/investigacion/grupos/artes/