-
-
Notifications
You must be signed in to change notification settings - Fork 910
New issue
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
Upgrade sphinx to ~7.1.2 #1954
Upgrade sphinx to ~7.1.2 #1954
Conversation
The old pinned version and its explicitly constrained dependencies are retained for now for Python 3.7 so that documentation can be built even with 3.7. (This could maybe be removed soon as a preliminary step toward evenutally dropping 3.7 support.) For Python 3.8 and higher, version 7.1.2 is used, allowing later patch versions but constrained to remain 7.1.*. This is so the same versions are likely to be selected on all Python version from 3.8 and higher, to minimize small differences in generated documentation that different versions could give, and also to simplify debugging. The reason to upgrade Sphinx now is to suppport Python 3.13, which shall be (and, in the pre-releases available, is) incompatible with versions of Sphinx below 6.2. This is because those earlier Sphinx versions use the deprecated `imghdr` module, which 3.13 removes: - https://docs.python.org/3.13/whatsnew/3.13.html#whatsnew313-pep594 - python/cpython#104818 On old versions of Sphinx, that gives the error: Extension error: Could not import extension sphinx.builders.epub3 (exception: No module named 'imghdr') Using Sphinx 6.2 is sufficient to avoid this, but there do not seem to be any disadvantages for GitPython to remain below 7.1.2. The reason we did not upgrade Sphinx before is that, last time we considered doing so, we ran into a problem of new warnings (that we treat as errors). This is detailed in the "Can we upgrade Sphinx?" section of gitpython-developers#1802, especially the "What Sphinx 5 is talking about" subsection. The problem is warnings about `Actor` when it comes in through type annotations: WARNING: more than one target found for cross-reference 'Actor': git.objects.util.Actor, git.util.Actor So this includes other changes to fix that problem as well. The solution used here is to import `Actor` even when `TYPE_CHECKING` is `false`, and write it unquoted in annotations, as `Actor` rather than `"Actor"`. This allows Sphinx to discern where it should consider it to be located, for the purpose of linking to its documentation. This does not incur overhead, because: - The affected modules already have imports from `git.util`, so also importing `Actor` from `git.util` does not cause any modules to be imported that were not imported otherwise, nor even to be imported at a different time. - Even if that that had not been the case, most modules in GitPython including `git.util` have members imported them into the top-level `git` module in `git.__init__` when `git` is imported (and thus when any Python submodule of `git` is imported). The only disadvantage is the presence of the additional name in those modules at runtime, which a user might inadvertently use and thus write brittle code that could break if it is later removed. But: - The affected modules define `__all__` and do not include `"Actor"` in `__all__`, so it is non-public. - There are many places in GitPython (and most Python libraries) where the onus is already on the author of code that uses the library to avoid doing this. The reasons for this approach, rather than any of several others, were: 1. I did not write out the annotations as `git.util.Actor` to resolve the ambiguity because annotations should, and for some uses must, also be interpretable as expressions. But while `from git.util import Actor` works and makes `Actor` available, `git.util.Actor` cannot be used as an expression even after `import git.util`. This is because, even after such an import, `git.util` actually refers to `git.index.util`. This is as detailed in the warnings issued when it is accessed, originally from an overly broad `*` import but retained because removing it could be a breaking change. See `git/__init__.py` for details. 2. The reason I did not write out the annotations as `git.objects.util.Actor` to resolve the ambiguity is that not all occurrences where Sphinx needed to be told which module to document it as being from were within the `git.objects` Python submodule. Two of the warnings were in `git/objects/tag.py`, where annotating it that way would not be confusing. But the other two were in `git/index/base.py`. 3. Although removing `Actor` from `git.objects.util.__all__` would resolve the ambiguity, this should not be done, because: - This would be a breaking change. - It seems to be there deliberately, since `git.objects.util` contains other members that relate to it directly. 4. The reasons I did not take this opportunity to move the contents of `git/util.py` to a new file in that directory and make `git/util.py` re-export the contents, even though this would allow a solution analogous to (1) but for the new module to be used, while also simplifying importing elsewhere, were: - That seems like a change that should be done separately, based either on the primary benefit to users or on a greater need for it. - If and when that is done, it may make sense to change the interface as well. For example, `git/util.py` has a number of members that it makes available for use throughout GitPython but that are deliberately omitted from `__all__` and are meant as non-public outside the project. One approach would be to make a module with a leading `_` for these "internal" members, and another public ones with everything else. But that also cannot be decided based on the considerations that motivate the changes here. - The treatment of `HIDE_WINDOWS_KNOWN_ERRORS`, which is public in `git/util.py` and which currently *does* have an effect, will need to be considered. Although it cannot be re-bound by assigning to `git.util.HIDE_WINDOWS_KNOWN_ERRORS` because the `git.util` subexpression would evaluate to `git.index.util`, there may be code that re-binds it in another way, such as by accessing the module through `sys.modules`. Unlike functions and classes that should not be monkey-patched from code outside GitPython's test suite anyway, this attribute may reasonably be assigned to, so it matters what module it is actually in, unless the action of assigning to it elsewhere is customized dynamically to carry over to the "real" place. 5. An alternative solution that may be reasonable in the near future is to modify `reference.rst` so duplicate documentation is no longer emitted for functions and classes that are defined in one place but imported and "re-exported" elsewhere. I suspect this may solve the problem, allowing the `Actor` imports to go back under `if TYPE_CHECKING:` and to annotate with `"Actor"` again while still running `make -C doc html` with no warnings. However, this would entail design decisions about how to still document those members. They should probably have links to where they are fully documented. So an entry for `Actor` in the section of `reference.rst` for `git.objects.util` would still exist, but be very short and refer to the full autodoc item for `Actor` the section for `git.util`. Since a `:class:` reference to `git.objects.util.Actor` should still go to the stub that links to `git.util.Actor`, it is not obvious that solving the duplication in documentation generated for `reference.rst` ought to be done in a way that would address the ambiguity Sphinx warns about, even if it *can* be done in such a way. Therefore, that should also be a separate consideration and, if warranted, a separate change.
There was a problem hiding this comment.
Choose a reason for hiding this comment
The reason will be displayed to describe this comment to others. Learn more.
Thanks a lot for this initiative, and the incredible amount of attention to detail!
Independently of what made the changes necessary, the direct import led to more readable type definitions.
Should support for building documentation on Python 3.7 be removed now, or kept in for a while? This would make the documentation step in the CI workflow conditional on not being 3.7, and would allow: -sphinx >= 7.1.2, < 7.2 ; python_version >= "3.8"
+sphinx >= 7.1.2, < 7.2
-sphinx == 4.3.2 ; python_version < "3.8"
-sphinxcontrib-applehelp >= 1.0.2, <= 1.0.4 ; python_version < "3.8"
-sphinxcontrib-devhelp == 1.0.2 ; python_version < "3.8"
-sphinxcontrib-htmlhelp >= 2.0.0, <= 2.0.1 ; python_version < "3.8"
-sphinxcontrib-qthelp == 1.0.3 ; python_version < "3.8"
-sphinxcontrib-serializinghtml == 1.1.5 ; python_version < "3.8"
sphinx_rtd_theme
sphinx-autodoc-typehints I don't think this is urgent, since special-casing 3.7 can remain in place for a while, possibly as long as we otherwise test/support 3.7. However, I also suspect not much is gained by continuing to support building documentation on 3.7, because:
|
I'd love to get the patch above applied, thanks for raising awareness! |
This removes the specially cased alternative lower versions of `sphinx` and its dependencies that, since gitpython-developers#1954, were only for Python 3.7. As discussed in comments there, this simplifies the documentation dependencies and avoids a situation where the version of Python used to build the documentation has a noticeable effect on the generated result. This also conditions running the "Documentation" step in the main CI test workflow (`pythonpackage.yml`) on the Python version not being 3.7 (otherwise the job would always fail). The only change this makes to the support status of GitPython on Python 3.7 is to no longer support building documentation on 3.7. GitPython can still be installed and used on 3.7 (though usually this would not be a good idea, outside of testing, since Python 3.7 itself has not been supported by the Python Software Foundation for quite some time). In addition, the documentation, which can be built on any version >= 3.8 (including 3.13 starting in gitpython-developers#1954) is no less relevant to usage on Python 3.7 than it was before.
I've opened #1956 for this. Note that, in addition to the above-shown patch, it also modifies the main CI test workflow so it doesn't attempt to build documentation on Python 3.7. |
This upgrades Sphinx from 4.3.2 to 7.1.2.
The old pinned version and its explicitly constrained dependencies are retained for now for Python 3.7 so that documentation can be built even with 3.7. (This could maybe be removed soon as a preliminary step toward eventually dropping 3.7 support.)
For Python 3.8 and higher, version 7.1.2 is used, allowing later patch versions but constrained to remain 7.1.*. This is so the same versions are likely to be selected on all Python version from 3.8 and higher, to minimize small differences in generated documentation that different versions could give, and also to simplify debugging.
The reason to upgrade Sphinx now is to support Python 3.13, which shall be (and, in the pre-releases available, is) incompatible with versions of Sphinx below 6.2. This is because those earlier Sphinx versions use the deprecated
imghdr
module, which 3.13 removes:On old versions of Sphinx, that gives the error:
Using Sphinx 6.2 is sufficient to avoid this, but there do not seem to be any disadvantages for GitPython to remain below 7.1.2.
The reason we did not upgrade Sphinx before is that, last time we considered doing so, we ran into a problem of new warnings (that we treat as errors). This is detailed in the "Can we upgrade Sphinx?" section of #1802, especially the "What Sphinx 5 is talking about" subsection. The problem is warnings about
Actor
when it comes in through type annotations:So this includes other changes to fix that problem as well. The solution used here is to import
Actor
even whenTYPE_CHECKING
isfalse
, and write it unquoted in annotations, asActor
rather than"Actor"
. This allows Sphinx to discern where it should consider it to be located, for the purpose of linking to its documentation.This does not incur overhead, because:
git.util
, so also importingActor
fromgit.util
does not cause any modules to be imported that were not imported otherwise, nor even to be imported at a different time.git.util
have members imported them into the top-levelgit
module ingit.__init__
whengit
is imported (and thus when any Python submodule ofgit
is imported).The only disadvantage is the presence of the additional name in those modules at runtime, which a user might inadvertently use and thus write brittle code that could break if it is later removed. But:
__all__
and do not include"Actor"
in__all__
, so it is non-public.The reasons for the approach taken here, rather than any of several others, were:
I did not write out the annotations as
git.util.Actor
to resolve the ambiguity because annotations should, and for some uses must, also be interpretable as expressions. But whilefrom git.util import Actor
works and makesActor
available,git.util.Actor
cannot be used as an expression even afterimport git.util
. This is because, even after such an import,git.util
actually refers togit.index.util
. This is as detailed in the warnings issued when it is accessed, originally from an overly broad*
import but retained because removing it could be a breaking change. Seegit/__init__.py
for details.The reason I did not write out the annotations as
git.objects.util.Actor
to resolve the ambiguity is that not all occurrences where Sphinx needed to be told which module to document it as being from were within thegit.objects
Python submodule. Two of the warnings were ingit/objects/tag.py
, where annotating it that way would not be confusing. But the other two were ingit/index/base.py
.Although removing
Actor
fromgit.objects.util.__all__
would resolve the ambiguity, this should not be done, because:git.objects.util
contains other members that relate to it directly.The reasons I did not take this opportunity to move the contents of
git/util.py
to a new file in that directory and makegit/util.py
re-export the contents, even though this would allow a solution analogous to (1) but for the new module to be used, while also simplifying importing elsewhere, were:git/util.py
has a number of members that it makes available for use throughout GitPython but that are deliberately omitted from__all__
and are meant as non-public outside the project. One approach would be to make a module with a leading_
for these "internal" members, and another public ones with everything else. But that also cannot be decided based on the considerations that motivate the changes here.HIDE_WINDOWS_KNOWN_ERRORS
, which is public ingit/util.py
and which currently does have an effect, will need to be considered. Although it cannot be re-bound by assigning togit.util.HIDE_WINDOWS_KNOWN_ERRORS
because thegit.util
subexpression would evaluate togit.index.util
, there may be code that re-binds it in another way, such as by accessing the module throughsys.modules
. Unlike functions and classes that should not be monkey-patched from code outside GitPython's test suite anyway, this attribute may reasonably be assigned to, so it matters what module it is actually in, unless the action of assigning to it elsewhere is customized dynamically to carry over to the "real" place.An alternative solution that may be reasonable in the near future is to modify
reference.rst
so duplicate documentation is no longer emitted for functions and classes that are defined in one place but imported and "re-exported" elsewhere. I suspect this may solve the problem, allowing theActor
imports to go back underif TYPE_CHECKING:
and to annotate with"Actor"
again while still runningmake -C doc html
with no warnings.However, this would entail design decisions about how to still document those members. They should probably have links to where they are fully documented. So an entry for
Actor
in the section ofreference.rst
forgit.objects.util
would still exist, but be very short and refer to the full autodoc item forActor
the section forgit.util
. Since a:class:
reference togit.objects.util.Actor
should still go to the stub that links togit.util.Actor
, it is not obvious that solving the duplication in documentation generated forreference.rst
ought to be done in a way that would address the ambiguity Sphinx warns about, even if it can be done in such a way.Therefore, that should also be a separate consideration and, if warranted, a separate change.
This builds successfully:
continue-on-error
to observe the documentation step, though that could be done if necessary. Here's a CI run including 3.13.0rc1 without upgrading Sphinx, and here's a CI run with including 3.13.0rc1 as well as the changes from this PR.Notice how in the API reference each section name on the left side is now expandable, and the items inside it are then expandable, and so forth. This adds another way of finding what one is looking for. I didn't deliberately change anything here to achieve that; it comes along with the version upgrade.