Noto Sans Tagalog: Version 2.002; ttfautohint (v1.8.4.7-5d5b) added

[simoncozens]

f875e01: [gftools-packager] Noto Sans Tagalog: Version 2.002; ttfautohint (v1.8.4.7-5d5b) added

• Noto Sans Tagalog Version 2.002; ttfautohint (v1.8.4.7-5d5b) taken from the upstream repo https://github.com/notofonts/tagalog.git at commit https://github.com/notofonts/tagalog/commit/.

[github-actions]

Fontbakery report

Fontbakery version: 0.8.13

[1] Family checks

ℹ INFO: Check axis ordering on the STAT table. (com.google.fonts/check/STAT/axis_order)

• ℹ INFO From a total of 1 font files, 1 of them (100.00%) lack a STAT table.

  And these are the most common STAT axis orderings:
  [code: summary]

[16] NotoSansTagalog-Regular.ttf

🔥 FAIL: Ensure soft_dotted characters lose their dot when combined with marks that replace the dot. (com.google.fonts/check/soft_dotted)

• 🔥 FAIL The dot of soft dotted characters used in orthographies must disappear in the following strings: į̀ į́ į̂ į̃ į̄ į̌

The dot of soft dotted characters should disappear in other cases, for example: į̆ į̇ į̈ į̊ į̋ į̒ į̦̀ į̦́ į̦̂ į̦̃ į̦̄ į̦̆ į̦̇ į̦̈ į̦̊ į̦̋ į̦̌ į̦̒ į̧̀ į̧́ [code: soft-dotted]

⚠ WARN: Check for codepoints not covered by METADATA subsets. (com.google.fonts/check/metadata/unreachable_subsetting)

• ⚠ WARN The following codepoints supported by the font are not covered by
  any subsets defined in the font's metadata file, and will never
  be served. You can solve this by either manually adding additional
  subset declarations to METADATA.pb, or by editing the glyphset
  definitions.

• U+02C7 CARON: try adding one of: canadian-aboriginal, tifinagh, yi

• U+02D8 BREVE: try adding one of: canadian-aboriginal, yi

• U+02D9 DOT ABOVE: try adding one of: canadian-aboriginal, yi

• U+02DB OGONEK: try adding one of: canadian-aboriginal, yi

• U+0300 COMBINING GRAVE ACCENT: try adding one of: old-permic, cherokee, tai-le, coptic

• U+0301 COMBINING ACUTE ACCENT: try adding one of: osage, coptic, cherokee, tifinagh, tai-le

• U+0302 COMBINING CIRCUMFLEX ACCENT: try adding one of: tifinagh, cherokee, math, coptic

• U+0303 COMBINING TILDE: try adding one of: glagolitic, math, syriac

• U+0304 COMBINING MACRON: try adding one of: osage, coptic, cherokee, caucasian-albanian, syriac, tifinagh, gothic

• U+0306 COMBINING BREVE: try adding one of: tifinagh, old-permic
  5 more.

Use -F or --full-lists to disable shortening of long lists.

Or you can add the above codepoints to one of the subsets supported by the font: latin, latin-ext, menu, tagalog [code: unreachable-subsetting]

⚠ WARN: A static fonts directory with at least two fonts must accompany variable fonts (com.google.fonts/check/repo/vf_has_static_fonts)

• ⚠ WARN Please consider adding a subdirectory called "static/" and including in it static font files. [code: missing]

⚠ WARN: On a family update, the DESCRIPTION.en_us.html file should ideally also be updated. (com.google.fonts/check/description/family_update)

• ⚠ WARN The DESCRIPTION.en_us.html file in this family has not changed in comparison to the latest font release on the google/fonts github repo.
  Please consider mentioning note-worthy improvements made to the family recently. [code: description-not-updated]

⚠ WARN: Ensure fonts have ScriptLangTags declared on the 'meta' table. (com.google.fonts/check/meta/script_lang_tags)

• ⚠ WARN This font file does not have a 'meta' table. [code: lacks-meta-table]

⚠ WARN: Check font contains no unreachable glyphs (com.google.fonts/check/unreachable_glyphs)

• ⚠ WARN The following glyphs could not be reached by codepoint or substitution rules:

  • uni00A0.1
    [code: unreachable-glyphs]

⚠ WARN: Check if each glyph has the recommended amount of contours. (com.google.fonts/check/contour_count)

• ⚠ WARN This check inspects the glyph outlines and detects the total number of contours in each of them. The expected values are infered from the typical ammounts of contours observed in a large collection of reference font families. The divergences listed below may simply indicate a significantly different design on some of your glyphs. On the other hand, some of these may flag actual bugs in the font such as glyphs mapped to an incorrect codepoint. Please consider reviewing the design and codepoint assignment of these to make sure they are correct.

The following glyphs do not have the recommended number of contours:

- Glyph name: aogonek	Contours detected: 3	Expected: 2

- Glyph name: uogonek	Contours detected: 2	Expected: 1

- Glyph name: aogonek	Contours detected: 3	Expected: 2 

- Glyph name: uogonek	Contours detected: 2	Expected: 1

[code: contour-count]

⚠ WARN: Check math signs have the same width. (com.google.fonts/check/math_signs_width)

• ⚠ WARN The most common width is 572 among a set of 6 math glyphs.
  The following math glyphs have a different width, though:

Width = 322:
minus
[code: width-outliers]

⚠ WARN: Are any segments inordinately short? (com.google.fonts/check/outline_short_segments)

• ⚠ WARN The following glyphs have segments which seem very short:

  • two (U+0032) contains a short segment L<<159.0,84.0>--<159.0,80.0>>

  • at (U+0040) contains a short segment B<<613.0,293.0>-<612.0,275.0>-<612.0,267.5>>

  • at (U+0040) contains a short segment B<<612.0,267.5>-<612.0,260.0>-<612.0,257.0>>

  • M (U+004D) contains a short segment L<<177.0,626.0>--<173.0,626.0>>

  • M (U+004D) contains a short segment L<<450.0,129.0>--<454.0,129.0>>

  • N (U+004E) contains a short segment L<<176.0,593.0>--<172.0,593.0>>

  • N (U+004E) contains a short segment L<<582.0,123.0>--<586.0,123.0>>

  • Q (U+0051) contains a short segment B<<416.0,-9.0>-<410.0,-9.0>-<403.5,-9.5>>

  • Q (U+0051) contains a short segment B<<403.5,-9.5>-<397.0,-10.0>-<391.0,-10.0>>

  • W (U+0057) contains a short segment B<<468.0,577.5>-<463.0,600.0>-<461.0,609.0>>

  • 90 more.

Use -F or --full-lists to disable shortening of long lists. [code: found-short-segments]

⚠ WARN: Do outlines contain any semi-vertical or semi-horizontal lines? (com.google.fonts/check/outline_semi_vertical)

• ⚠ WARN The following glyphs have semi-vertical/semi-horizontal lines:

  • uni1710 (U+1710): L<<173.0,0.0>--<171.0,566.0>>

  • uni1710 (U+1710): L<<248.0,550.0>--<250.0,151.0>> [code: found-semi-vertical]

ℹ INFO: Show hinting filesize impact. (com.google.fonts/check/hinting_impact)

• ℹ INFO Hinting filesize impact:

	ofl/notosanstagalog/NotoSansTagalog-Regular.ttf
Dehinted Size	36.1kb
Hinted Size	51.8kb
Increase	15.6kb
Change	43.2 %
[code: size-impact]

ℹ INFO: EPAR table present in font? (com.google.fonts/check/epar)

• ℹ INFO EPAR table not present in font. To learn more see When missing EPAR table, just emit INFO alert fonttools/fontbakery#818 [code: lacks-EPAR]

ℹ INFO: Is the Grid-fitting and Scan-conversion Procedure ('gasp') table set to optimize rendering? (com.google.fonts/check/gasp)

• ℹ INFO These are the ppm ranges declared on the gasp table:

PPM <= 65535:
flag = 0x0F
- Use grid-fitting
- Use grayscale rendering
- Use gridfitting with ClearType symmetric smoothing
- Use smoothing along multiple axes with ClearType®
[code: ranges]

ℹ INFO: Check for font-v versioning. (com.google.fonts/check/fontv)

• ℹ INFO Version string is: "Version 2.002; ttfautohint (v1.8.4.7-5d5b)"
  The version string must ideally include a git commit hash and either a "dev" or a "release" suffix such as in the example below:
  "Version 1.3; git-0d08353-release" [code: bad-format]

ℹ INFO: Font contains all required tables? (com.google.fonts/check/required_tables)

• ℹ INFO This font contains the following optional tables:

  • cvt

  • fpgm

  • loca

  • prep

  • GPOS

  • GSUB

  • gasp

  • vhea

  • vmtx [code: optional-tables]

ℹ INFO: List all superfamily filepaths (com.google.fonts/check/superfamily/list)

• ℹ INFO ofl/notosanstagalog [code: family-path]

Summary

💔 ERROR	🔥 FAIL	⚠ WARN	💤 SKIP	ℹ INFO	🍞 PASS	🔎 DEBUG
0	1	9	62	7	167	0
0%	0%	4%	25%	3%	68%	0%

Note: The following loglevels were omitted in this report:

• SKIP
• PASS
• DEBUG