This repository contains all the material needed for the 1st ASTERICS-OBELICS International School on "Advanced software programming for astrophysics and astroparticle physics". The time table is available at the following location.

Table on content

• Important links
• Get a copy of this repository with git
• Recommendation for Python install
  • Linux
  • Mac
  • Windows
  • Library requirements
• Jupyter
• IDE: PyCharm
• Cartesius machines
• Chat rooms
• Tutors
• Help

Important links

• Local copies of needed software, like Anaconda and PyCharm
• Gitter chat rooms
• Cartesius access form

Get a copy of this repository with git

Clone this repository on your personal computer.

  git clone https://github.com/Asterics2020-Obelics/School2017.git

You will need it before the school to install the different tools, and during the school while attending the hands-on. For Windows, see below.

Recommendation for Python install

You must install Python 3.6 and a few Python libraries. The recommended way to do so is to use Anaconda. The procedures described bellow will help you install what is needed for the school.

Linux

1. Install required distribution packages :

   • Ubuntu: sudo apt-get install -y git bzip2 wget
   • Fedora 25: sudo dnf install -y git wget bzip2
   • CERN Scientific Linux 6: sudo yum install -y git tar bzip2 wget
   • CERN CentOS 7: sudo yum install -y git bzip2 wget

2. Download (local copy) the Linux Anaconda installer for Python 3.6.

3. Run the following command line:

    bash Anaconda3-4.3.1-Linux-x86_64.sh
   

4. Answer no to the following question if you do not want to mess up your previous installs of python.

    Do you wish the installer to prepend the Anaconda3 install location
    to PATH in your /home/chotard/.bashrc ? [yes|no]
    [no] >>> no
   

5. If you haven't cloned this repository, download one of the anaconda_setup script (sh or csh depending on your shell):

    wget https://raw.githubusercontent.com/Asterics2020-Obelics/School2017/master/anaconda_setup.sh
    or
    wget https://raw.githubusercontent.com/Asterics2020-Obelics/School2017/master/anaconda_setup.csh
   

6. If you have installed anaconda in a different directory than the default one suggested by the anaconda installer (your home directory), edit the first line of the anaconda_setup script with your selected path.

    ANACONDA=YOURSELECTEDPATH
    or
    setenv ANACONDA YOURSELECTEDPATH
   

7. Run the anaconda_setup script to set up the correct PATH and PYTHONPATH enabling the use of your Anaconda install.

    source anaconda_setup.sh
    or
    source anaconda_setup.csh
   

   You can either run this command each time you need to use Anaconda, or add its content to your .bashrc (or equivalent) to set it up at the opening of a new terminal.

8. See next section for extra Python libraries requirements (if any).

Mac

1. Download (local copy) the Mac Anaconda installer for Python 3.6.

2. Run the following command line:

    bash Anaconda3-4.3.1-MacOSX-x86_64.sh
   

3. Answer no to the following question if you do not want to mess up your previous installs of python.

    Do you wish the installer to prepend the Anaconda3 install location
    to PATH in your /home/chotard/.bashrc ? [yes|no]
    [no] >>> no
   

4. If you haven't cloned this repository, first get the anaconda_setup.sh script:

    wget https://raw.githubusercontent.com/Asterics2020-Obelics/School2017/master/anaconda_setup.sh
   

5. If you have installed anaconda in a different directory than the default one suggested by the anaconda installer (your home directory), edit the first line of the anaconda_setup script with your selected path.

    ANACONDA=YOURSELECTEDPATH
   

6. Run the anaconda_setup.sh script to set up the correct PATH and PYTHONPATH enabling the use of your Anaconda install.

    source anaconda_setup.sh
   

   You can either run this command each time you need to use Anaconda, or add its content to your .bashrc (or equivalent) to set it up at the opening of a new terminal.

7. See next section for extra Python libraries requirements (if any).

Windows

Instruction for Windows can be found here for the installation of Anaconda (local copy). Once installed, you can run Anaconda navigator. To run Jupyter, on the main page of the Anaconda navigator, click on Launch on the Jupyter notebook box. This will open your favorite browser. From there, you can either load a notebook (e.g. from the Git folder) or create a new notebook by clicking new -> Python 3.

You can also install a Git tool for Windows: Git for Windows. Launch Git GUI or Git bash to get started.

Library requirements

All the required libraries come with the Anaconda install described above. If you have followed the previous steps to install Python, you can skip this section.

If you choose an other way to install Python 3.6 than the one recommended above, you must install manually the Python libraries listed in the requirements.txt file. To do so, we recommend using pip.

  pip install -r requirements.txt

Jupyter

To launch a Jupyter notebook, simply run the following command:

jupyter notebook

On Windows, see in the above.

IDE: PyCharm

We strongly recommend to use pycharm, especially for the "Debugging & profiling" course. Free Community Edition: Download PyCharm (local copy) or opt for a free copy of the Professional Edition under Student License.

Cartesius machines

For the parallel and GPU sessions, we will use the Cartesius machines that are generously made available by SURFsara for the OBELICS school. You will need to connect to them through the ssh protocol (natively installed on Linux and Mac).

For Windows users, we recommend these tools to connect via ssh:

• Putty & Winscp
• Or, on Windows 10: use the native bash environment

Connect to Cartesius

To connect to Cartesius, please open a terminal and use the following command:

ssh accntXXX@cartesius.surfsara.nl

Where XXX is the account number you received via email. Type in the password you received together with your login name and press enter. NOTE that, the cursor won't move while tying in the password, this is normal, so just keep typing.

The account is made available for the school and will be valid till 30th of June. If you would like to connect to Cartesius from outside of LAPP, please use the following command:

ssh accntXXX@doornode.surfsara.nl

Type in your password and select system Cartesius.

Preparation for Hands-on session of GPU programming

Login to Cartesius, clone the git repository and generate a key pair.

ssh accntXXX@cartesius.surfsara.nl
git clone https://github.com/Asterics2020-Obelics/School2017.git

ssh-keygen -t rsa

Press Enter three times. A key pair will be generated for you in directory .ssh. Copy the contents of the public key to file authorized_keys:

cat .ssh/id_rsa.pub >> .ssh/authorized_keys
chmod 700 ~/.ssh
chmod 600 ~/.ssh/authorized_keys

Submit a job to Cartesius

When the hands-on session starts, submit the following job to Cartesius:

cd School2017/gpu_programming
sbatch job.jupyter.gpu

Open a new terminal and do the following:

ssh -L5XXX:localhost:5XXX accntXXX@vis.cartesius.surfsara.nl

Note that, you need to replace XXX with the three digits of your login account. Now you can open a new tab in your browser and go to localhost:5XXX (replace XXX with the three digits of your own account).

Chat rooms

Gitter chat rooms have been created for each hands-on session and group. If you need to talk to each other during the session, share information, ask questions and get fast answer in case all the tutors are busy, you can use the corresponding chat rooms to do so. These chat rooms can also be used by the different tutors to give information or advices before or during the hands-on sessions.

Be aware that you will need to be connected to use these chat rooms, preferentially using your github account. You can also start one-to-one chat rooms.

Tutors

Here is the list of tutors for the hands-on sessions. Four (or more) are needed for each session (except for GPU and parallel which are parallel sessions).

Hands-on	Main tutor(s)	Other tutors
Numpy	Tamas Gal	Axel Donath, Johannes King, Pierre Aubert, Tristan Carel, N. Chotard
Pandas	Tamas Gal	Damian Podareanu, Karl Kosack, Johannes King, N. Chotard
Astropy	Axel Donath, Johannes King	Karl Kosack, Hendrik Heinl, Tim Jeness, N. Chotard
Profiling & Debugging	Karl Kosack	Axel Donath, Zheng Meyer-Zhao, Pierre Aubert, Tristan Carel
Parallel Programming	Damian Podareanu	Tamas Gal, Pierre Aubert, Jean Jacquemier, Tristan Carel
GPU Programming	Valeriu Codreanu	Pierre Aubert, Zheng Meyer-Zhao, Tristan Carel (?)

The full list of tutors is available here.

Help

Please create a new issue (you will need a github account) for each question you may have before or during the school about software install and/or about one of the classes. Of course, you should first check the existing list of issues to see if your question has already been asked and answered before creating a new one.