r8152 as module #368
Comments
|
I second that. |
mdrjr
pushed a commit
that referenced
this issue
Sep 29, 2023
[ Upstream commit 403f0e7 ] macb_set_tx_clk() is called under a spinlock but itself calls clk_set_rate() which can sleep. This results in: | BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580 | pps pps1: new PPS source ptp1 | in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 40, name: kworker/u4:3 | preempt_count: 1, expected: 0 | RCU nest depth: 0, expected: 0 | 4 locks held by kworker/u4:3/40: | #0: ffff000003409148 | macb ff0c0000.ethernet: gem-ptp-timer ptp clock registered. | ((wq_completion)events_power_efficient){+.+.}-{0:0}, at: process_one_work+0x14c/0x51c | #1: ffff8000833cbdd8 ((work_completion)(&pl->resolve)){+.+.}-{0:0}, at: process_one_work+0x14c/0x51c | #2: ffff000004f01578 (&pl->state_mutex){+.+.}-{4:4}, at: phylink_resolve+0x44/0x4e8 | #3: ffff000004f06f50 (&bp->lock){....}-{3:3}, at: macb_mac_link_up+0x40/0x2ac | irq event stamp: 113998 | hardirqs last enabled at (113997): [<ffff800080e8503c>] _raw_spin_unlock_irq+0x30/0x64 | hardirqs last disabled at (113998): [<ffff800080e84478>] _raw_spin_lock_irqsave+0xac/0xc8 | softirqs last enabled at (113608): [<ffff800080010630>] __do_softirq+0x430/0x4e4 | softirqs last disabled at (113597): [<ffff80008001614c>] ____do_softirq+0x10/0x1c | CPU: 0 PID: 40 Comm: kworker/u4:3 Not tainted 6.5.0-11717-g9355ce8b2f50-dirty #368 | Hardware name: ... ZynqMP ... (DT) | Workqueue: events_power_efficient phylink_resolve | Call trace: | dump_backtrace+0x98/0xf0 | show_stack+0x18/0x24 | dump_stack_lvl+0x60/0xac | dump_stack+0x18/0x24 | __might_resched+0x144/0x24c | __might_sleep+0x48/0x98 | __mutex_lock+0x58/0x7b0 | mutex_lock_nested+0x24/0x30 | clk_prepare_lock+0x4c/0xa8 | clk_set_rate+0x24/0x8c | macb_mac_link_up+0x25c/0x2ac | phylink_resolve+0x178/0x4e8 | process_one_work+0x1ec/0x51c | worker_thread+0x1ec/0x3e4 | kthread+0x120/0x124 | ret_from_fork+0x10/0x20 The obvious fix is to move the call to macb_set_tx_clk() out of the protected area. This seems safe as rx and tx are both disabled anyway at this point. It is however not entirely clear what the spinlock shall protect. It could be the read-modify-write access to the NCFGR register, but this is accessed in macb_set_rx_mode() and macb_set_rxcsum_feature() as well without holding the spinlock. It could also be the register accesses done in mog_init_rings() or macb_init_buffers(), but again these functions are called without holding the spinlock in macb_hresp_error_task(). The locking seems fishy in this driver and it might deserve another look before this patch is applied. Fixes: 633e98a ("net: macb: use resolved link config in mac_link_up()") Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Link: https://lore.kernel.org/r/20230908112913.1701766-1-s.hauer@pengutronix.de Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
mdrjr
pushed a commit
that referenced
this issue
Dec 11, 2023
[ Upstream commit da59608 ] Because the gma_irq_install() is call after psb_gem_mm_init() function, when psb_gem_mm_init() fails, the interrupt line haven't been allocated. Yet the gma_irq_uninstall() is called in the psb_driver_unload() function without checking if checking the irq is registered or not. The calltrace is appended as following: [ 20.539253] ioremap memtype_reserve failed -16 [ 20.543895] gma500 0000:00:02.0: Failure to map stolen base. [ 20.565049] ------------[ cut here ]------------ [ 20.565066] Trying to free already-free IRQ 16 [ 20.565087] WARNING: CPU: 1 PID: 381 at kernel/irq/manage.c:1893 free_irq+0x209/0x370 [ 20.565316] CPU: 1 PID: 381 Comm: systemd-udevd Tainted: G C 6.5.0-rc1+ #368 [ 20.565329] Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./IMB-140D Plus, BIOS P1.10 11/18/2013 [ 20.565338] RIP: 0010:free_irq+0x209/0x370 [ 20.565357] Code: 41 5d 41 5e 41 5f 5d 31 d2 89 d1 89 d6 89 d7 41 89 d1 c3 cc cc cc cc 8b 75 d0 48 c7 c7 e0 77 12 9f 4c 89 4d c8 e8 57 fe f4 ff <0f> 0b 48 8b 75 c8 4c 89 f7 e8 29 f3 f1 00 49 8b 47 40 48 8b 40 78 [ 20.565369] RSP: 0018:ffffae3b40733808 EFLAGS: 00010046 [ 20.565382] RAX: 0000000000000000 RBX: ffff9f8082bfe000 RCX: 0000000000000000 [ 20.565390] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 20.565397] RBP: ffffae3b40733840 R08: 0000000000000000 R09: 0000000000000000 [ 20.565405] R10: 0000000000000000 R11: 0000000000000000 R12: ffff9f80871c3100 [ 20.565413] R13: ffff9f80835d3360 R14: ffff9f80835d32a4 R15: ffff9f80835d3200 [ 20.565424] FS: 00007f13d36458c0(0000) GS:ffff9f8138880000(0000) knlGS:0000000000000000 [ 20.565434] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 20.565441] CR2: 00007f0d046f3f20 CR3: 0000000006c8c000 CR4: 00000000000006e0 [ 20.565450] Call Trace: [ 20.565458] <TASK> [ 20.565470] ? show_regs+0x72/0x90 [ 20.565488] ? free_irq+0x209/0x370 [ 20.565504] ? __warn+0x8d/0x160 [ 20.565520] ? free_irq+0x209/0x370 [ 20.565536] ? report_bug+0x1bb/0x1d0 [ 20.565555] ? handle_bug+0x46/0x90 [ 20.565572] ? exc_invalid_op+0x19/0x80 [ 20.565587] ? asm_exc_invalid_op+0x1b/0x20 [ 20.565607] ? free_irq+0x209/0x370 [ 20.565625] ? free_irq+0x209/0x370 [ 20.565644] gma_irq_uninstall+0x15b/0x1e0 [gma500_gfx] [ 20.565728] psb_driver_unload+0x27/0x190 [gma500_gfx] [ 20.565800] psb_pci_probe+0x5d2/0x790 [gma500_gfx] [ 20.565873] local_pci_probe+0x48/0xb0 [ 20.565892] pci_device_probe+0xc8/0x280 [ 20.565912] really_probe+0x1d2/0x440 [ 20.565929] __driver_probe_device+0x8a/0x190 [ 20.565944] driver_probe_device+0x23/0xd0 [ 20.565957] __driver_attach+0x10f/0x220 [ 20.565971] ? __pfx___driver_attach+0x10/0x10 [ 20.565984] bus_for_each_dev+0x7a/0xe0 [ 20.566002] driver_attach+0x1e/0x30 [ 20.566014] bus_add_driver+0x127/0x240 [ 20.566029] driver_register+0x64/0x140 [ 20.566043] ? __pfx_psb_init+0x10/0x10 [gma500_gfx] [ 20.566111] __pci_register_driver+0x68/0x80 [ 20.566128] psb_init+0x2c/0xff0 [gma500_gfx] [ 20.566194] do_one_initcall+0x46/0x330 [ 20.566214] ? kmalloc_trace+0x2a/0xb0 [ 20.566233] do_init_module+0x6a/0x270 [ 20.566250] load_module+0x207f/0x23a0 [ 20.566278] init_module_from_file+0x9c/0xf0 [ 20.566293] ? init_module_from_file+0x9c/0xf0 [ 20.566315] idempotent_init_module+0x184/0x240 [ 20.566335] __x64_sys_finit_module+0x64/0xd0 [ 20.566352] do_syscall_64+0x59/0x90 [ 20.566366] ? ksys_mmap_pgoff+0x123/0x270 [ 20.566378] ? __secure_computing+0x9b/0x110 [ 20.566392] ? exit_to_user_mode_prepare+0x39/0x190 [ 20.566406] ? syscall_exit_to_user_mode+0x2a/0x50 [ 20.566420] ? do_syscall_64+0x69/0x90 [ 20.566433] ? do_syscall_64+0x69/0x90 [ 20.566445] ? do_syscall_64+0x69/0x90 [ 20.566458] entry_SYSCALL_64_after_hwframe+0x6e/0xd8 [ 20.566472] RIP: 0033:0x7f13d351ea3d [ 20.566485] Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d c3 a3 0f 00 f7 d8 64 89 01 48 [ 20.566496] RSP: 002b:00007ffe566c1fd8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 20.566510] RAX: ffffffffffffffda RBX: 000055e66806eec0 RCX: 00007f13d351ea3d [ 20.566519] RDX: 0000000000000000 RSI: 00007f13d36d9441 RDI: 0000000000000010 [ 20.566527] RBP: 0000000000020000 R08: 0000000000000000 R09: 0000000000000002 [ 20.566535] R10: 0000000000000010 R11: 0000000000000246 R12: 00007f13d36d9441 [ 20.566543] R13: 000055e6681108c0 R14: 000055e66805ba70 R15: 000055e66819a9c0 [ 20.566559] </TASK> [ 20.566566] ---[ end trace 0000000000000000 ]--- Signed-off-by: Sui Jingfeng <suijingfeng@loongson.cn> Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230727185855.713318-1-suijingfeng@loongson.cn Signed-off-by: Sasha Levin <sashal@kernel.org>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
please build r8152 driver as a module instead of built-in, in order to make it easier to install realtek's own r8152 driver on top op your kernel
The text was updated successfully, but these errors were encountered: