How To Order Manually

Manual Ordering

You'll need 4 things.

1. Gerber Files - PCB Layers, Pick & Place Position files - https://drive.google.com/file/d/1PiM6UmdJJfFV4jGoRopB7YKquq7ZwYPZ/view
2. Bill Of Materials (BOM) in .xls - Parts for SMD Assembly (v.1.3) - https://docs.google.com/spreadsheets/d/e/2PACX-1vQZARj1c6dKJMR8zrlyJ02ksAwMN-4glRHxUCWAa5Q-7tr1l2NX_JUqJZdeNimFfg/pub?output=xlsx
3. Reference PDF - PDF version of the DD86 Duplicator page - https://drive.google.com/file/d/1PT9EuWaC44eZirBFAQ45IReWkUfISVdk/view?usp=sharing
4. Basic confirmal of information.
5. (Money...)

PCBWay Assembly Instructions:

Quantity: 1

Contains Sensitive components/parts? NO

Do you accept alternatives/substitutes made in China? YES

Number of Unique Parts: 30

Number of SMT Parts: 59

Number of BGA/QFP Parts: 0

Number of Through-Hole Parts: 5

If issue with SRN8040-101M on pad L501, and asked to solder manually say YES, as the part will solder just fine and is for power filtering. it's non-critical as long as its got soldered contact and that's fine.

• For the PCBs themselves, you have a minimum order of 5 boards. Select ENIG for the best surface finish. Colour is up to you. It's best to not use black and to avoid yellow since the contrast is poor.

• DO NOT commit to an order of the PCB before the SMD assesmbly and BOM have been worked out. Please try to include the reference PDF as it may help in email correspondance; however with current updated files there should be no issues.

• Google/Drive/Dropbox etc. are all blocked in China. Use email for any files or documents.

• If asked how many layers the PCB is say 2. (Will be possibly changed to 4 or more in later versions.)

• If encountering any issues reference order T-1K4W413458A to fix and proceed.

How do I get assembly? After creating your PCB order and after its approval you can proceed to the SMT Assembly Page - https://www.pcbway.com/quotesmt.aspx

1. Copy the values in the attached image. Make sure to select yes on "Select PCBWay's PCB Order?" and enter your board order, after that calculate the cost and save to cart.

2. After saving the cart you'll get a pop up. Add your Gerber & Bom, note that the Centroid file is the .pos inside of the Gerber.