cores = 2 in resources not working on VM on Ubuntu 21.10 #11773
Assignees
Labels
Projects
Comments
DerekStrickland
added this to Needs Triage
in Nomad - Community Issues Triage
via automation
|
Hi @joshuataylor! You're most likely running into issues with cgroups v2, which are the default on the version of Ubuntu you're using. We're working on fixing that in #11289, and my colleague @lgfa29 has a workaround in #12088 (comment) if you'd like to give that a try. |
|
I'm going to close this out as a dupe of #11289 |
shoenig
added a commit
that referenced
this issue
Mar 21, 2022
This PR introduces support for using Nomad on systems with cgroups v2 [1] enabled as the cgroups controller mounted on /sys/fs/cgroups. Newer Linux distros like Ubuntu 21.10 are shipping with cgroups v2 only, causing problems for Nomad users. Nomad mostly "just works" with cgroups v2 due to the indirection via libcontainer, but not so for managing cpuset cgroups. Before, Nomad has been making use of a feature in v1 where a PID could be a member of more than one cgroup. In v2 this is no longer possible, and so the logic around computing cpuset values must be modified. When Nomad detects v2, it manages cpuset values in-process, rather than making use of cgroup heirarchy inheritence via shared/reserved parents. Nomad will only activate the v2 logic when it detects cgroups2 is mounted at /sys/fs/cgroups. This means on systems running in hybrid mode with cgroups2 mounted at /sys/fs/cgroups/unified (as is typical) Nomad will continue to use the v1 logic, and should operate as before. Systems that do not support cgroups v2 are also not affected. When v2 is activated, Nomad will create a parent called nomad.slice (unless otherwise configured in Client conifg), and create cgroups for tasks using naming convention <allocID>-<task>.scope. These follow the naming convention set by systemd and also used by Docker when cgroups v2 is detected. Client nodes now export a new fingerprint attribute, unique.cgroups.version which will be set to "v1" or "v2" to indicate the cgroups regime in use by Nomad. The new cpuset management strategy fixes #11705, where docker tasks that spawned processes on startup would "leak". In cgroups v2, the PIDs are started in the cgroup they will always live in, and thus the cause of the leak is eliminated. [1] https://www.kernel.org/doc/html/latest/admin-guide/cgroup-v2.html Closes #11289 Fixes #11705 #11773 #11933
shoenig
added a commit
that referenced
this issue
Mar 21, 2022
This PR introduces support for using Nomad on systems with cgroups v2 [1] enabled as the cgroups controller mounted on /sys/fs/cgroups. Newer Linux distros like Ubuntu 21.10 are shipping with cgroups v2 only, causing problems for Nomad users. Nomad mostly "just works" with cgroups v2 due to the indirection via libcontainer, but not so for managing cpuset cgroups. Before, Nomad has been making use of a feature in v1 where a PID could be a member of more than one cgroup. In v2 this is no longer possible, and so the logic around computing cpuset values must be modified. When Nomad detects v2, it manages cpuset values in-process, rather than making use of cgroup heirarchy inheritence via shared/reserved parents. Nomad will only activate the v2 logic when it detects cgroups2 is mounted at /sys/fs/cgroups. This means on systems running in hybrid mode with cgroups2 mounted at /sys/fs/cgroups/unified (as is typical) Nomad will continue to use the v1 logic, and should operate as before. Systems that do not support cgroups v2 are also not affected. When v2 is activated, Nomad will create a parent called nomad.slice (unless otherwise configured in Client conifg), and create cgroups for tasks using naming convention <allocID>-<task>.scope. These follow the naming convention set by systemd and also used by Docker when cgroups v2 is detected. Client nodes now export a new fingerprint attribute, unique.cgroups.version which will be set to "v1" or "v2" to indicate the cgroups regime in use by Nomad. The new cpuset management strategy fixes #11705, where docker tasks that spawned processes on startup would "leak". In cgroups v2, the PIDs are started in the cgroup they will always live in, and thus the cause of the leak is eliminated. [1] https://www.kernel.org/doc/html/latest/admin-guide/cgroup-v2.html Closes #11289 Fixes #11705 #11773 #11933
shoenig
added a commit
that referenced
this issue
Mar 21, 2022
This PR introduces support for using Nomad on systems with cgroups v2 [1] enabled as the cgroups controller mounted on /sys/fs/cgroups. Newer Linux distros like Ubuntu 21.10 are shipping with cgroups v2 only, causing problems for Nomad users. Nomad mostly "just works" with cgroups v2 due to the indirection via libcontainer, but not so for managing cpuset cgroups. Before, Nomad has been making use of a feature in v1 where a PID could be a member of more than one cgroup. In v2 this is no longer possible, and so the logic around computing cpuset values must be modified. When Nomad detects v2, it manages cpuset values in-process, rather than making use of cgroup heirarchy inheritence via shared/reserved parents. Nomad will only activate the v2 logic when it detects cgroups2 is mounted at /sys/fs/cgroups. This means on systems running in hybrid mode with cgroups2 mounted at /sys/fs/cgroups/unified (as is typical) Nomad will continue to use the v1 logic, and should operate as before. Systems that do not support cgroups v2 are also not affected. When v2 is activated, Nomad will create a parent called nomad.slice (unless otherwise configured in Client conifg), and create cgroups for tasks using naming convention <allocID>-<task>.scope. These follow the naming convention set by systemd and also used by Docker when cgroups v2 is detected. Client nodes now export a new fingerprint attribute, unique.cgroups.version which will be set to "v1" or "v2" to indicate the cgroups regime in use by Nomad. The new cpuset management strategy fixes #11705, where docker tasks that spawned processes on startup would "leak". In cgroups v2, the PIDs are started in the cgroup they will always live in, and thus the cause of the leak is eliminated. [1] https://www.kernel.org/doc/html/latest/admin-guide/cgroup-v2.html Closes #11289 Fixes #11705 #11773 #11933
shoenig
added a commit
that referenced
this issue
Mar 21, 2022
This PR introduces support for using Nomad on systems with cgroups v2 [1] enabled as the cgroups controller mounted on /sys/fs/cgroups. Newer Linux distros like Ubuntu 21.10 are shipping with cgroups v2 only, causing problems for Nomad users. Nomad mostly "just works" with cgroups v2 due to the indirection via libcontainer, but not so for managing cpuset cgroups. Before, Nomad has been making use of a feature in v1 where a PID could be a member of more than one cgroup. In v2 this is no longer possible, and so the logic around computing cpuset values must be modified. When Nomad detects v2, it manages cpuset values in-process, rather than making use of cgroup heirarchy inheritence via shared/reserved parents. Nomad will only activate the v2 logic when it detects cgroups2 is mounted at /sys/fs/cgroups. This means on systems running in hybrid mode with cgroups2 mounted at /sys/fs/cgroups/unified (as is typical) Nomad will continue to use the v1 logic, and should operate as before. Systems that do not support cgroups v2 are also not affected. When v2 is activated, Nomad will create a parent called nomad.slice (unless otherwise configured in Client conifg), and create cgroups for tasks using naming convention <allocID>-<task>.scope. These follow the naming convention set by systemd and also used by Docker when cgroups v2 is detected. Client nodes now export a new fingerprint attribute, unique.cgroups.version which will be set to "v1" or "v2" to indicate the cgroups regime in use by Nomad. The new cpuset management strategy fixes #11705, where docker tasks that spawned processes on startup would "leak". In cgroups v2, the PIDs are started in the cgroup they will always live in, and thus the cause of the leak is eliminated. [1] https://www.kernel.org/doc/html/latest/admin-guide/cgroup-v2.html Closes #11289 Fixes #11705 #11773 #11933
shoenig
added a commit
that referenced
this issue
Mar 22, 2022
This PR introduces support for using Nomad on systems with cgroups v2 [1] enabled as the cgroups controller mounted on /sys/fs/cgroups. Newer Linux distros like Ubuntu 21.10 are shipping with cgroups v2 only, causing problems for Nomad users. Nomad mostly "just works" with cgroups v2 due to the indirection via libcontainer, but not so for managing cpuset cgroups. Before, Nomad has been making use of a feature in v1 where a PID could be a member of more than one cgroup. In v2 this is no longer possible, and so the logic around computing cpuset values must be modified. When Nomad detects v2, it manages cpuset values in-process, rather than making use of cgroup heirarchy inheritence via shared/reserved parents. Nomad will only activate the v2 logic when it detects cgroups2 is mounted at /sys/fs/cgroups. This means on systems running in hybrid mode with cgroups2 mounted at /sys/fs/cgroups/unified (as is typical) Nomad will continue to use the v1 logic, and should operate as before. Systems that do not support cgroups v2 are also not affected. When v2 is activated, Nomad will create a parent called nomad.slice (unless otherwise configured in Client conifg), and create cgroups for tasks using naming convention <allocID>-<task>.scope. These follow the naming convention set by systemd and also used by Docker when cgroups v2 is detected. Client nodes now export a new fingerprint attribute, unique.cgroups.version which will be set to "v1" or "v2" to indicate the cgroups regime in use by Nomad. The new cpuset management strategy fixes #11705, where docker tasks that spawned processes on startup would "leak". In cgroups v2, the PIDs are started in the cgroup they will always live in, and thus the cause of the leak is eliminated. [1] https://www.kernel.org/doc/html/latest/admin-guide/cgroup-v2.html Closes #11289 Fixes #11705 #11773 #11933
shoenig
added a commit
that referenced
this issue
Mar 22, 2022
This PR introduces support for using Nomad on systems with cgroups v2 [1] enabled as the cgroups controller mounted on /sys/fs/cgroups. Newer Linux distros like Ubuntu 21.10 are shipping with cgroups v2 only, causing problems for Nomad users. Nomad mostly "just works" with cgroups v2 due to the indirection via libcontainer, but not so for managing cpuset cgroups. Before, Nomad has been making use of a feature in v1 where a PID could be a member of more than one cgroup. In v2 this is no longer possible, and so the logic around computing cpuset values must be modified. When Nomad detects v2, it manages cpuset values in-process, rather than making use of cgroup heirarchy inheritence via shared/reserved parents. Nomad will only activate the v2 logic when it detects cgroups2 is mounted at /sys/fs/cgroups. This means on systems running in hybrid mode with cgroups2 mounted at /sys/fs/cgroups/unified (as is typical) Nomad will continue to use the v1 logic, and should operate as before. Systems that do not support cgroups v2 are also not affected. When v2 is activated, Nomad will create a parent called nomad.slice (unless otherwise configured in Client conifg), and create cgroups for tasks using naming convention <allocID>-<task>.scope. These follow the naming convention set by systemd and also used by Docker when cgroups v2 is detected. Client nodes now export a new fingerprint attribute, unique.cgroups.version which will be set to "v1" or "v2" to indicate the cgroups regime in use by Nomad. The new cpuset management strategy fixes #11705, where docker tasks that spawned processes on startup would "leak". In cgroups v2, the PIDs are started in the cgroup they will always live in, and thus the cause of the leak is eliminated. [1] https://www.kernel.org/doc/html/latest/admin-guide/cgroup-v2.html Closes #11289 Fixes #11705 #11773 #11933
shoenig
added a commit
that referenced
this issue
Mar 22, 2022
This PR introduces support for using Nomad on systems with cgroups v2 [1] enabled as the cgroups controller mounted on /sys/fs/cgroups. Newer Linux distros like Ubuntu 21.10 are shipping with cgroups v2 only, causing problems for Nomad users. Nomad mostly "just works" with cgroups v2 due to the indirection via libcontainer, but not so for managing cpuset cgroups. Before, Nomad has been making use of a feature in v1 where a PID could be a member of more than one cgroup. In v2 this is no longer possible, and so the logic around computing cpuset values must be modified. When Nomad detects v2, it manages cpuset values in-process, rather than making use of cgroup heirarchy inheritence via shared/reserved parents. Nomad will only activate the v2 logic when it detects cgroups2 is mounted at /sys/fs/cgroups. This means on systems running in hybrid mode with cgroups2 mounted at /sys/fs/cgroups/unified (as is typical) Nomad will continue to use the v1 logic, and should operate as before. Systems that do not support cgroups v2 are also not affected. When v2 is activated, Nomad will create a parent called nomad.slice (unless otherwise configured in Client conifg), and create cgroups for tasks using naming convention <allocID>-<task>.scope. These follow the naming convention set by systemd and also used by Docker when cgroups v2 is detected. Client nodes now export a new fingerprint attribute, unique.cgroups.version which will be set to "v1" or "v2" to indicate the cgroups regime in use by Nomad. The new cpuset management strategy fixes #11705, where docker tasks that spawned processes on startup would "leak". In cgroups v2, the PIDs are started in the cgroup they will always live in, and thus the cause of the leak is eliminated. [1] https://www.kernel.org/doc/html/latest/admin-guide/cgroup-v2.html Closes #11289 Fixes #11705 #11773 #11933
shoenig
added a commit
that referenced
this issue
Mar 22, 2022
This PR introduces support for using Nomad on systems with cgroups v2 [1] enabled as the cgroups controller mounted on /sys/fs/cgroups. Newer Linux distros like Ubuntu 21.10 are shipping with cgroups v2 only, causing problems for Nomad users. Nomad mostly "just works" with cgroups v2 due to the indirection via libcontainer, but not so for managing cpuset cgroups. Before, Nomad has been making use of a feature in v1 where a PID could be a member of more than one cgroup. In v2 this is no longer possible, and so the logic around computing cpuset values must be modified. When Nomad detects v2, it manages cpuset values in-process, rather than making use of cgroup heirarchy inheritence via shared/reserved parents. Nomad will only activate the v2 logic when it detects cgroups2 is mounted at /sys/fs/cgroups. This means on systems running in hybrid mode with cgroups2 mounted at /sys/fs/cgroups/unified (as is typical) Nomad will continue to use the v1 logic, and should operate as before. Systems that do not support cgroups v2 are also not affected. When v2 is activated, Nomad will create a parent called nomad.slice (unless otherwise configured in Client conifg), and create cgroups for tasks using naming convention <allocID>-<task>.scope. These follow the naming convention set by systemd and also used by Docker when cgroups v2 is detected. Client nodes now export a new fingerprint attribute, unique.cgroups.version which will be set to "v1" or "v2" to indicate the cgroups regime in use by Nomad. The new cpuset management strategy fixes #11705, where docker tasks that spawned processes on startup would "leak". In cgroups v2, the PIDs are started in the cgroup they will always live in, and thus the cause of the leak is eliminated. [1] https://www.kernel.org/doc/html/latest/admin-guide/cgroup-v2.html Closes #11289 Fixes #11705 #11773 #11933
shoenig
added a commit
that referenced
this issue
Mar 22, 2022
This PR introduces support for using Nomad on systems with cgroups v2 [1] enabled as the cgroups controller mounted on /sys/fs/cgroups. Newer Linux distros like Ubuntu 21.10 are shipping with cgroups v2 only, causing problems for Nomad users. Nomad mostly "just works" with cgroups v2 due to the indirection via libcontainer, but not so for managing cpuset cgroups. Before, Nomad has been making use of a feature in v1 where a PID could be a member of more than one cgroup. In v2 this is no longer possible, and so the logic around computing cpuset values must be modified. When Nomad detects v2, it manages cpuset values in-process, rather than making use of cgroup heirarchy inheritence via shared/reserved parents. Nomad will only activate the v2 logic when it detects cgroups2 is mounted at /sys/fs/cgroups. This means on systems running in hybrid mode with cgroups2 mounted at /sys/fs/cgroups/unified (as is typical) Nomad will continue to use the v1 logic, and should operate as before. Systems that do not support cgroups v2 are also not affected. When v2 is activated, Nomad will create a parent called nomad.slice (unless otherwise configured in Client conifg), and create cgroups for tasks using naming convention <allocID>-<task>.scope. These follow the naming convention set by systemd and also used by Docker when cgroups v2 is detected. Client nodes now export a new fingerprint attribute, unique.cgroups.version which will be set to "v1" or "v2" to indicate the cgroups regime in use by Nomad. The new cpuset management strategy fixes #11705, where docker tasks that spawned processes on startup would "leak". In cgroups v2, the PIDs are started in the cgroup they will always live in, and thus the cause of the leak is eliminated. [1] https://www.kernel.org/doc/html/latest/admin-guide/cgroup-v2.html Closes #11289 Fixes #11705 #11773 #11933
shoenig
added a commit
that referenced
this issue
Mar 22, 2022
This PR introduces support for using Nomad on systems with cgroups v2 [1] enabled as the cgroups controller mounted on /sys/fs/cgroups. Newer Linux distros like Ubuntu 21.10 are shipping with cgroups v2 only, causing problems for Nomad users. Nomad mostly "just works" with cgroups v2 due to the indirection via libcontainer, but not so for managing cpuset cgroups. Before, Nomad has been making use of a feature in v1 where a PID could be a member of more than one cgroup. In v2 this is no longer possible, and so the logic around computing cpuset values must be modified. When Nomad detects v2, it manages cpuset values in-process, rather than making use of cgroup heirarchy inheritence via shared/reserved parents. Nomad will only activate the v2 logic when it detects cgroups2 is mounted at /sys/fs/cgroups. This means on systems running in hybrid mode with cgroups2 mounted at /sys/fs/cgroups/unified (as is typical) Nomad will continue to use the v1 logic, and should operate as before. Systems that do not support cgroups v2 are also not affected. When v2 is activated, Nomad will create a parent called nomad.slice (unless otherwise configured in Client conifg), and create cgroups for tasks using naming convention <allocID>-<task>.scope. These follow the naming convention set by systemd and also used by Docker when cgroups v2 is detected. Client nodes now export a new fingerprint attribute, unique.cgroups.version which will be set to "v1" or "v2" to indicate the cgroups regime in use by Nomad. The new cpuset management strategy fixes #11705, where docker tasks that spawned processes on startup would "leak". In cgroups v2, the PIDs are started in the cgroup they will always live in, and thus the cause of the leak is eliminated. [1] https://www.kernel.org/doc/html/latest/admin-guide/cgroup-v2.html Closes #11289 Fixes #11705 #11773 #11933
shoenig
added a commit
that referenced
this issue
Mar 23, 2022
This PR introduces support for using Nomad on systems with cgroups v2 [1] enabled as the cgroups controller mounted on /sys/fs/cgroups. Newer Linux distros like Ubuntu 21.10 are shipping with cgroups v2 only, causing problems for Nomad users. Nomad mostly "just works" with cgroups v2 due to the indirection via libcontainer, but not so for managing cpuset cgroups. Before, Nomad has been making use of a feature in v1 where a PID could be a member of more than one cgroup. In v2 this is no longer possible, and so the logic around computing cpuset values must be modified. When Nomad detects v2, it manages cpuset values in-process, rather than making use of cgroup heirarchy inheritence via shared/reserved parents. Nomad will only activate the v2 logic when it detects cgroups2 is mounted at /sys/fs/cgroups. This means on systems running in hybrid mode with cgroups2 mounted at /sys/fs/cgroups/unified (as is typical) Nomad will continue to use the v1 logic, and should operate as before. Systems that do not support cgroups v2 are also not affected. When v2 is activated, Nomad will create a parent called nomad.slice (unless otherwise configured in Client conifg), and create cgroups for tasks using naming convention <allocID>-<task>.scope. These follow the naming convention set by systemd and also used by Docker when cgroups v2 is detected. Client nodes now export a new fingerprint attribute, unique.cgroups.version which will be set to "v1" or "v2" to indicate the cgroups regime in use by Nomad. The new cpuset management strategy fixes #11705, where docker tasks that spawned processes on startup would "leak". In cgroups v2, the PIDs are started in the cgroup they will always live in, and thus the cause of the leak is eliminated. [1] https://www.kernel.org/doc/html/latest/admin-guide/cgroup-v2.html Closes #11289 Fixes #11705 #11773 #11933
shoenig
added a commit
that referenced
this issue
Mar 23, 2022
This PR introduces support for using Nomad on systems with cgroups v2 [1] enabled as the cgroups controller mounted on /sys/fs/cgroups. Newer Linux distros like Ubuntu 21.10 are shipping with cgroups v2 only, causing problems for Nomad users. Nomad mostly "just works" with cgroups v2 due to the indirection via libcontainer, but not so for managing cpuset cgroups. Before, Nomad has been making use of a feature in v1 where a PID could be a member of more than one cgroup. In v2 this is no longer possible, and so the logic around computing cpuset values must be modified. When Nomad detects v2, it manages cpuset values in-process, rather than making use of cgroup heirarchy inheritence via shared/reserved parents. Nomad will only activate the v2 logic when it detects cgroups2 is mounted at /sys/fs/cgroups. This means on systems running in hybrid mode with cgroups2 mounted at /sys/fs/cgroups/unified (as is typical) Nomad will continue to use the v1 logic, and should operate as before. Systems that do not support cgroups v2 are also not affected. When v2 is activated, Nomad will create a parent called nomad.slice (unless otherwise configured in Client conifg), and create cgroups for tasks using naming convention <allocID>-<task>.scope. These follow the naming convention set by systemd and also used by Docker when cgroups v2 is detected. Client nodes now export a new fingerprint attribute, unique.cgroups.version which will be set to "v1" or "v2" to indicate the cgroups regime in use by Nomad. The new cpuset management strategy fixes #11705, where docker tasks that spawned processes on startup would "leak". In cgroups v2, the PIDs are started in the cgroup they will always live in, and thus the cause of the leak is eliminated. [1] https://www.kernel.org/doc/html/latest/admin-guide/cgroup-v2.html Closes #11289 Fixes #11705 #11773 #11933
shoenig
added a commit
that referenced
this issue
Mar 23, 2022
This PR introduces support for using Nomad on systems with cgroups v2 [1] enabled as the cgroups controller mounted on /sys/fs/cgroups. Newer Linux distros like Ubuntu 21.10 are shipping with cgroups v2 only, causing problems for Nomad users. Nomad mostly "just works" with cgroups v2 due to the indirection via libcontainer, but not so for managing cpuset cgroups. Before, Nomad has been making use of a feature in v1 where a PID could be a member of more than one cgroup. In v2 this is no longer possible, and so the logic around computing cpuset values must be modified. When Nomad detects v2, it manages cpuset values in-process, rather than making use of cgroup heirarchy inheritence via shared/reserved parents. Nomad will only activate the v2 logic when it detects cgroups2 is mounted at /sys/fs/cgroups. This means on systems running in hybrid mode with cgroups2 mounted at /sys/fs/cgroups/unified (as is typical) Nomad will continue to use the v1 logic, and should operate as before. Systems that do not support cgroups v2 are also not affected. When v2 is activated, Nomad will create a parent called nomad.slice (unless otherwise configured in Client conifg), and create cgroups for tasks using naming convention <allocID>-<task>.scope. These follow the naming convention set by systemd and also used by Docker when cgroups v2 is detected. Client nodes now export a new fingerprint attribute, unique.cgroups.version which will be set to "v1" or "v2" to indicate the cgroups regime in use by Nomad. The new cpuset management strategy fixes #11705, where docker tasks that spawned processes on startup would "leak". In cgroups v2, the PIDs are started in the cgroup they will always live in, and thus the cause of the leak is eliminated. [1] https://www.kernel.org/doc/html/latest/admin-guide/cgroup-v2.html Closes #11289 Fixes #11705 #11773 #11933
shoenig
added a commit
that referenced
this issue
Mar 23, 2022
This PR introduces support for using Nomad on systems with cgroups v2 [1] enabled as the cgroups controller mounted on /sys/fs/cgroups. Newer Linux distros like Ubuntu 21.10 are shipping with cgroups v2 only, causing problems for Nomad users. Nomad mostly "just works" with cgroups v2 due to the indirection via libcontainer, but not so for managing cpuset cgroups. Before, Nomad has been making use of a feature in v1 where a PID could be a member of more than one cgroup. In v2 this is no longer possible, and so the logic around computing cpuset values must be modified. When Nomad detects v2, it manages cpuset values in-process, rather than making use of cgroup heirarchy inheritence via shared/reserved parents. Nomad will only activate the v2 logic when it detects cgroups2 is mounted at /sys/fs/cgroups. This means on systems running in hybrid mode with cgroups2 mounted at /sys/fs/cgroups/unified (as is typical) Nomad will continue to use the v1 logic, and should operate as before. Systems that do not support cgroups v2 are also not affected. When v2 is activated, Nomad will create a parent called nomad.slice (unless otherwise configured in Client conifg), and create cgroups for tasks using naming convention <allocID>-<task>.scope. These follow the naming convention set by systemd and also used by Docker when cgroups v2 is detected. Client nodes now export a new fingerprint attribute, unique.cgroups.version which will be set to 'v1' or 'v2' to indicate the cgroups regime in use by Nomad. The new cpuset management strategy fixes #11705, where docker tasks that spawned processes on startup would "leak". In cgroups v2, the PIDs are started in the cgroup they will always live in, and thus the cause of the leak is eliminated. [1] https://www.kernel.org/doc/html/latest/admin-guide/cgroup-v2.html Closes #11289 Fixes #11705 #11773 #11933
shoenig
added a commit
that referenced
this issue
Mar 23, 2022
This PR introduces support for using Nomad on systems with cgroups v2 [1] enabled as the cgroups controller mounted on /sys/fs/cgroups. Newer Linux distros like Ubuntu 21.10 are shipping with cgroups v2 only, causing problems for Nomad users. Nomad mostly "just works" with cgroups v2 due to the indirection via libcontainer, but not so for managing cpuset cgroups. Before, Nomad has been making use of a feature in v1 where a PID could be a member of more than one cgroup. In v2 this is no longer possible, and so the logic around computing cpuset values must be modified. When Nomad detects v2, it manages cpuset values in-process, rather than making use of cgroup heirarchy inheritence via shared/reserved parents. Nomad will only activate the v2 logic when it detects cgroups2 is mounted at /sys/fs/cgroups. This means on systems running in hybrid mode with cgroups2 mounted at /sys/fs/cgroups/unified (as is typical) Nomad will continue to use the v1 logic, and should operate as before. Systems that do not support cgroups v2 are also not affected. When v2 is activated, Nomad will create a parent called nomad.slice (unless otherwise configured in Client conifg), and create cgroups for tasks using naming convention <allocID>-<task>.scope. These follow the naming convention set by systemd and also used by Docker when cgroups v2 is detected. Client nodes now export a new fingerprint attribute, unique.cgroups.version which will be set to 'v1' or 'v2' to indicate the cgroups regime in use by Nomad. The new cpuset management strategy fixes #11705, where docker tasks that spawned processes on startup would "leak". In cgroups v2, the PIDs are started in the cgroup they will always live in, and thus the cause of the leak is eliminated. [1] https://www.kernel.org/doc/html/latest/admin-guide/cgroup-v2.html Closes #11289 Fixes #11705 #11773 #11933
|
I'm going to lock this issue because it has been closed for 120 days ⏳. This helps our maintainers find and focus on the active issues. |
Sign up for free
to subscribe to this conversation on GitHub.
Already have an account?
Sign in.
Nomad version
Nomad v1.2.3 (a79efc8)
Operating system and Environment details
Ubuntu 21.10
On 20.04 it seems to work.
Issue
On Ubuntu 21.10, even though the number of cores shows as 8 in the UI, it won't let me provision that many cores. Setting the full amount of hz that shows ( 0 MHz / 22,400 MHz Total )
Reproduction steps
Ubuntu 21.10
Expected Result
It works?
Actual Result
It says that no enough cores, only 1 works.
Job file (if appropriate)
Sorry for the lack of information, I couldn't see anything else in the logs, htop and other tools I tried all showed 8 cores on both 20.04 and 21.10.
The text was updated successfully, but these errors were encountered: