docs: add podman as an external task driver plugin

website/source/docs/drivers/external/index.html.md

@@ -23,6 +23,7 @@ plugins will have the same user experience as built in drivers.
 Below is a list of community-supported task drivers you can use with Nomad:
 
 - [LXC][lxc]
+- [Podman][podman]
 - [Singularity][singularity]
 - [Jail task driver][jail-task-driver]
 - [Pot][pot]
@@ -32,5 +33,6 @@ Below is a list of community-supported task drivers you can use with Nomad:
 [plugin_guide]: /docs/internals/plugins/index.html
 [singularity]: /docs/drivers/external/singularity.html
 [jail-task-driver]: /docs/drivers/external/jail-task-driver.html
+[podman]: /docs/drivers/external/podman.html
 [pot]: /docs/drivers/external/pot.html
 [firecracker-task-driver]: /docs/drivers/external/firecracker-task-driver.html

website/source/docs/drivers/external/lxc.html.md

@@ -186,5 +186,5 @@ isolation is not supported as of now.
 [lxc_man]: https://linuxcontainers.org/lxc/manpages/man5/lxc.container.conf.5.html#lbAM
 [plugin]: /docs/configuration/plugin.html
 [plugin_dir]: /docs/configuration/index.html#plugin_dir
-[plugin-options]: #plugin_options
+[plugin-options]: #plugin-options
 [client_options]: /docs/configuration/client.html#options

website/source/docs/drivers/external/podman.html.md

@@ -0,0 +1,244 @@
+---
+layout: "docs"
+page_title: "Drivers: podman"
+sidebar_current: "docs-drivers-community-podman"
+description: |-
+  The Podman task driver uses podman (https://podman.io/) for containerizing tasks.
+---
+
+# Podman Task Driver
+
+Name: `podman`
+
+Homepage: https://github.com/pascomnet/nomad-driver-podman
+
+The podman task driver plugin for Nomad uses the [Pod Manager (podman)][podman]
+daemonless container runtime for executing Nomad tasks. Podman supports OCI
+containers and its command line tool is meant to be [a drop-in replacement for
+Docker's][podman-cli].
+
+See the project's [homepage][homepage] for details.
+
+## Client Requirements
+
+* Linux host with [`podman`][podman] installed.
+* [`nomad-driver-podman`][releases] binary in Nomad's [`plugin_dir`][plugin_dir].
+
+You need a varlink enabled podman binary and a system socket activation unit, see https://podman.io/blogs/2019/01/16/podman-varlink.html.
+
+Since the Nomad agent, nomad-driver-podman plugin binary, and podman will
+reside on the same host, skip the ssh aspects of the podman varlink
+documentation above.
+
+## Task Configuration
+
+Due to Podman's similarity to Docker, the example job created by [`nomad init
+-short`][nomad-init] is easily adapted to use Podman instead:
+
+```hcl
+job "example" {
+  datacenters = ["dc1"]
+
+  group "cache" {
+    task "redis" {
+      driver = "podman"
+
+      config {
+        image = "docker://redis:3.2"
+
+        port_map {
+          db = 6379
+        }
+      }
+
+      resources {
+        cpu    = 500
+        memory = 256
+
+        network {
+          mbits = 10
+          port  "db"  {}
+        }
+      }
+    }
+  }
+}
+```
+
+* `image` - The image to run.
+
+```hcl
+config {
+  image = "docker://redis"
+}
+```
+
+* `command` - (Optional) The command to run when starting the container.
+
+```hcl
+config {
+  command = "some-command"
+}
+```
+
+* `args` - (Optional) A list of arguments to the optional command. If no
+  *command* is specified, the arguments are passed directly to the container.
+
+```hcl
+config {
+  args = [
+    "arg1",
+    "arg2",
+  ]
+}
+```
+
+* `volumes` - (Optional) A list of `host_path:container_path` strings to bind
+  host paths to container paths. 
+
+```hcl
+config {
+  volumes = [
+    "/some/host/data:/container/data"
+  ]
+}
+```
+
+* `tmpfs` - (Optional) A list of `/container_path` strings for tmpfs mount
+  points. See `podman run --tmpfs` options for details. 
+
+```hcl
+config {
+  tmpfs = [
+    "/var"
+  ]
+}
+```
+
+* `hostname` -  (Optional) The hostname to assign to the container. When
+  launching more than one of a task (using count) with this option set, every
+  container the task starts will have the same hostname.
+
+* `init` - Run an init inside the container that forwards signals and reaps processes.
+
+```hcl
+config {
+  init = true
+}
+```
+
+* `init_path` - Path to the container-init binary.
+
+```hcl
+config {
+  init = true
+  init_path = "/usr/libexec/podman/catatonit"
+}
+```
+
+* `user` - Run the command as a specific user/uid within the container. See
+  [task configuration][task].
+
+* `memory_reservation` - Memory soft limit (unit = b (bytes), k (kilobytes), m
+  (megabytes), or g (gigabytes))
+
+After setting memory reservation, when the system detects memory contention or
+low memory, containers are forced to restrict their consumption to their
+reservation. So you should always set the value below --memory, otherwise the
+hard limit will take precedence. By default, memory reservation will be the
+same as memory limit.
+
+```hcl
+config {
+  memory_reservation = "100m"
+}
+```
+
+* `memory_swap` - A limit value equal to memory plus swap. The swap limit
+  should always be larger than the [memory value][memory-value]. 
+
+Unit can be b (bytes), k (kilobytes), m (megabytes), or g (gigabytes). If you
+don't specify a unit, b is used. Set LIMIT to -1 to enable unlimited swap.
+
+```hcl
+config {
+  memory_swap = "180m"
+}
+```
+
+* `memory_swappiness` - Tune a container's memory swappiness behavior.  Accepts
+  an integer between 0 and 100.
+
+```hcl
+config {
+  memory_swappiness = 60
+}
+```
+
+## Networking
+
+Podman supports forwarding and exposing ports like Docker. See [Docker Driver
+configuration][docker-ports] for details.
+
+## Plugin Options
+
+The podman plugin has options which may be customized in the agent's
+configuration file.
+
+* `volumes` stanza:
+
+  * `enabled` - Defaults to `true`. Allows tasks to bind host paths (volumes)
+    inside their container. 
+  * `selinuxlabel` - Allows the operator to set a SELinux label to the
+    allocation and task local bind-mounts to containers. If used with
+    `volumes.enabled` set to false, the labels will still be applied to the
+    standard binds in the container.
+
+```hcl
+plugin "nomad-driver-podman" {
+  config {
+    volumes {
+      enabled      = true
+      selinuxlabel = "z"
+    }
+  }
+}
+```
+
+* `gc` stanza:
+
+    * `container` - Defaults to `true`. This option can be used to disable
+      Nomad from removing a container when the task exits.
+
+```hcl
+plugin "nomad-driver-podman" {
+  config {
+    gc {
+      container = false
+    }
+  }
+}
+```
+
+* `recover_stopped` - Defaults to `true`. Allows the driver to start and reuse
+  a previously stopped container after a Nomad client restart. 
+  Consider a simple single node system and a complete reboot. All previously managed containers
+  will be reused instead of disposed and recreated.
+
+```hcl
+plugin "nomad-driver-podman" {
+  config {
+    recover_stopped = false
+  }
+}
+```
+
+[docker-ports]: /docs/drivers/docker.html#forwarding-and-exposing-ports
+[homepage]: https://github.com/pascomnet/nomad-driver-podman
+[memory-value]: /docs/job-specification/resources.html#memory
+[nomad-init]: /docs/commands/job/init.html
+[plugin_dir]: /docs/configuration/index.html#plugin_dir
+[podman]: https://podman.io/
+[podman-cli]: https://podman.io/whatis.html
+[releases]: https://github.com/pascomnet/nomad-driver-podman/releases
+[task]: /docs/job-specification/task.html#user

website/source/docs/drivers/external/pot.html.md

@@ -6,7 +6,7 @@ description: |-
   The Pot task driver is used to run pot (https://github.com/pizzamig/pot) containers using FreeBSD jails.
 ---
 
-# Pot task Driver
+# Pot Task Driver
 
 Name: `pot`
 

website/source/layouts/docs.erb

@@ -498,6 +498,9 @@
               <li<%= sidebar_current("docs-drivers-community-lxc") %>>
                 <a href="/docs/drivers/external/lxc.html">LXC</a>
               </li>
+              <li<%= sidebar_current("docs-drivers-community-podman") %>>
+                <a href="/docs/drivers/external/podman.html">Podman</a>
+              </li>
               <li<%= sidebar_current("docs-drivers-community-singularity") %>>
               <a href="/docs/drivers/external/singularity.html">Singularity</a>
             </li>