Migrate old-style base scripts s6-rc

motioneye/rootfs/etc/services.d/motioneye/discovery → motioneye/rootfs/etc/s6-overlay/s6-rc.d/discovery/run

@@ -1,4 +1,5 @@
-#!/usr/bin/with-contenv bashio
+#!/command/with-contenv bashio
+# shellcheck shell=bash
 # ==============================================================================
 # Home Assistant Community Add-on: motionEye
 # Send Discovery information to Home Assistant

motioneye/rootfs/etc/s6-overlay/s6-rc.d/discovery/type

@@ -0,0 +1 @@
+oneshot

motioneye/rootfs/etc/s6-overlay/s6-rc.d/discovery/up

@@ -0,0 +1 @@
+/etc/s6-overlay/s6-rc.d/discovery/run

motioneye/rootfs/etc/cont-init.d/motioneye.sh → motioneye/rootfs/etc/s6-overlay/s6-rc.d/init-motioneye/run

@@ -1,4 +1,5 @@
-#!/usr/bin/with-contenv bashio
+#!/command/with-contenv bashio
+# shellcheck shell=bash
 # ==============================================================================
 # Home Assistant Community Add-on: motionEye
 # Creates initial motionEye configuration in case it is non-existing

motioneye/rootfs/etc/s6-overlay/s6-rc.d/init-motioneye/type

@@ -0,0 +1 @@
+oneshot

motioneye/rootfs/etc/s6-overlay/s6-rc.d/init-motioneye/up

@@ -0,0 +1 @@
+/etc/s6-overlay/s6-rc.d/init-motioneye/run

motioneye/rootfs/etc/cont-init.d/nginx.sh → motioneye/rootfs/etc/s6-overlay/s6-rc.d/init-nginx/run

@@ -1,4 +1,5 @@
-#!/usr/bin/with-contenv bashio
+#!/command/with-contenv bashio
+# shellcheck shell=bash
 # ==============================================================================
 # Home Assistant Community Add-on: motionEye
 # Configures NGINX for use with motionEye

motioneye/rootfs/etc/s6-overlay/s6-rc.d/init-nginx/type

@@ -0,0 +1 @@
+oneshot

motioneye/rootfs/etc/s6-overlay/s6-rc.d/init-nginx/up

@@ -0,0 +1 @@
+/etc/s6-overlay/s6-rc.d/init-nginx/run

motioneye/rootfs/etc/s6-overlay/s6-rc.d/motioneye/dependencies.d/init-motioneye

@@ -0,0 +1 @@
+

motioneye/rootfs/etc/s6-overlay/s6-rc.d/motioneye/finish

@@ -0,0 +1,27 @@
+#!/command/with-contenv bashio
+# shellcheck shell=bash
+# ==============================================================================
+# Home Assistant Community Add-on: motionEye
+# Take down the S6 supervision tree when motionEye fails
+# ==============================================================================
+declare exit_code
+readonly exit_code_container=$(</run/s6-linux-init-container-results/exitcode)
+readonly exit_code_service="${1}"
+readonly exit_code_signal="${2}"
+readonly service="motionEye"
+
+bashio::log.info \
+  "Service ${service} exited with code ${exit_code_service}" \
+  "(by signal ${exit_code_signal})"
+
+if [[ "${exit_code_service}" -eq 256 ]]; then
+  if [[ "${exit_code_container}" -eq 0 ]]; then
+    echo $((128 + $exit_code_signal)) > /run/s6-linux-init-container-results/exitcode
+  fi
+  [[ "${exit_code_signal}" -eq 15 ]] && exec /run/s6/basedir/bin/halt
+elif [[ "${exit_code_service}" -ne 0 ]]; then
+  if [[ "${exit_code_container}" -eq 0 ]]; then
+    echo "${exit_code_service}" > /run/s6-linux-init-container-results/exitcode
+  fi
+  exec /run/s6/basedir/bin/halt
+fi

motioneye/rootfs/etc/services.d/motioneye/run → motioneye/rootfs/etc/s6-overlay/s6-rc.d/motioneye/run

@@ -1,11 +1,11 @@
-#!/usr/bin/with-contenv bashio
+#!/command/with-contenv bashio
+# shellcheck shell=bash
 # ==============================================================================
 # Home Assistant Community Add-on: motionEye
 # Runs the motionEye
 # ==============================================================================
 declare -a options
 
-
 bashio::log.info "Starting motionEye..."
 
 options+=(-c /data/motioneye/motioneye.conf)
@@ -15,8 +15,5 @@ if bashio::debug; then
     options+=(-d)
 fi
 
-# Send out discovery information
-./discovery &
-
 # Run the motionEye
 exec meyectl startserver "${options[@]}"

motioneye/rootfs/etc/s6-overlay/s6-rc.d/motioneye/type

@@ -0,0 +1 @@
+longrun

motioneye/rootfs/etc/s6-overlay/s6-rc.d/nginx/finish

@@ -0,0 +1,26 @@
+#!/command/with-contenv bashio
+# ==============================================================================
+# Home Assistant Community Add-on: motionEye
+# Take down the S6 supervision tree when Nginx fails
+# ==============================================================================
+declare exit_code
+readonly exit_code_container=$(</run/s6-linux-init-container-results/exitcode)
+readonly exit_code_service="${1}"
+readonly exit_code_signal="${2}"
+readonly service="NGINX"
+
+bashio::log.info \
+  "Service ${service} exited with code ${exit_code_service}" \
+  "(by signal ${exit_code_signal})"
+
+if [[ "${exit_code_service}" -eq 256 ]]; then
+  if [[ "${exit_code_container}" -eq 0 ]]; then
+    echo $((128 + $exit_code_signal)) > /run/s6-linux-init-container-results/exitcode
+  fi
+  [[ "${exit_code_signal}" -eq 15 ]] && exec /run/s6/basedir/bin/halt
+elif [[ "${exit_code_service}" -ne 0 ]]; then
+  if [[ "${exit_code_container}" -eq 0 ]]; then
+    echo "${exit_code_service}" > /run/s6-linux-init-container-results/exitcode
+  fi
+  exec /run/s6/basedir/bin/halt
+fi

motioneye/rootfs/etc/services.d/nginx/run → motioneye/rootfs/etc/s6-overlay/s6-rc.d/nginx/run

@@ -1,4 +1,5 @@
-#!/usr/bin/with-contenv bashio
+#!/command/with-contenv bashio
+# shellcheck shell=bash
 # ==============================================================================
 # Home Assistant Community Add-on: motionEye
 # Runs the Nginx daemon

motioneye/rootfs/etc/s6-overlay/s6-rc.d/nginx/type

@@ -0,0 +1 @@
+longrun