Basic fan configuration

Example:

<FanDisplayName>CPU fan</FanDisplayName>
<WriteRegister>47</WriteRegister>
<ReadRegister>46</ReadRegister>
<MinSpeedValue>88</MinSpeedValue>
<MaxSpeedValue>48</MaxSpeedValue>
<IndependentReadMinMaxValues>false</IndependentReadMinMaxValues>
<MinSpeedValueRead>0</MinSpeedValueRead>
<MaxSpeedValueRead>0</MaxSpeedValueRead>
<ResetRequired>true</ResetRequired>
<FanSpeedResetValue>255</FanSpeedResetValue>

---

FanDisplayName

A name for the fan. Useful to differentiate between multiple fans.
If this element is empty, a default name will be assigned (e.g. Fan #1).

---

WriteRegister

The register which NBFC uses to control the fan.
Must be an integer between 0 and 255.

---

ReadRegister

The register from which NBFC reads the fan speed.
Must be an integer between 0 and 255.

💡Note: ReadRegister and WriteRegister may be equal.

---

MinSpeedValue

The value which puts the fan to the lowest possible speed (usually this stops the fan).
Must be an integer between 0 and 255 (or 0 and 65535 if ReadWriteWords is true).

💡Note: MinSpeedValue does not necessarily have to be smaller than MaxSpeedValue.

---

MaxSpeedValue

The value which puts the fan to the highest possible fan speed.
Must be an integer between 0 and 255 (or 0 and 65535 if ReadWriteWords is true).

---

IndependentReadMinMaxValues

Defines if independent minimum/maximum values should be applied for read operations.
Valid values: true or false

(available since version 1.4.2)

---

MinSpeedValueRead

The value which corresponds to the lowest possible fan speed.
Must be an integer between 0 and 255 (or 0 and 65535 if ReadWriteWords is true).
Will be ignored if IndependentReadMinMaxValues is false.

(available since version 1.4.2)

---

MaxSpeedValueRead

The value which corresponds to the highest possible fan speed.
Must be an integer between 0 and 255 (or 0 and 65535 if ReadWriteWords is true).
Will be ignored if IndependentReadMinMaxValues is false.

(available since version 1.4.2)

---

ResetRequired

Defines if the EC should be reset before the service is shut down.
Valid values: true or false

---

FanSpeedResetValue

Defines the value which will be written to WriteRegsiter to reset the EC.
Must be an integer between 0 and 255 (or 0 and 65535 if ReadWriteWords is true).

---