Release v0.11.0

README.md

@@ -15,6 +15,7 @@ below for usage and instructions.
   - [AppDaemon](/docs/appdaemon.md)
   - [Cloud9](/docs/cloud9.md)
   - [Duck DNS](/docs/duckdns.md)
+  - [Fail2ban](/docs/fail2ban.md)
   - [Hassbian](/docs/hassbian.md)
   - [Home Assistant](/docs/homeassistant.md)
   - [Homebridge](/docs/homebridge.md)
@@ -30,6 +31,7 @@ below for usage and instructions.
   - [Samba](/docs/samba.md)
   - [Trådfri](/docs/tradfri.md)
   - [Webterminal](/docs/webterminal.md)
+  - [Zigbee2mqtt](/docs/zigbee2mqtt.md)
 - [Changelog][changelog]
 
 ***

docs/fail2ban.md

@@ -0,0 +1,34 @@
+# Fail2Ban
+
+This script installs the fail2ban service.
+Some further configuration is required after installation. More information [here](https://www.home-assistant.io/cookbook/fail2ban/).
+
+## Installation
+
+```bash
+sudo hassbian-config install fail2ban
+```
+
+## Upgrade
+
+There's nothing to upgrade.
+
+## Additional info
+
+Description | Command/value
+:--- | :---
+Running as: | root
+Configuration file: | /etc/fail2ban/filter.d/ha.conf
+Configuration file: | /etc/fail2ban/jail.d/ha.conf
+Start service: | `sudo systemctl start fail2ban.service`
+Stop service: | `sudo systemctl stop fail2ban.service`
+Restart service: | `sudo systemctl restart fail2ban.service`
+Service status: | `sudo systemctl status fail2ban.service`
+
+***
+
+This install script was originally contributed by [@Landrash][landrash]
+
+<!--- Links --->
+[landrash]: https://github.com/landrash
+[repo]: https://github.com/home-assistant/hassbian-scripts/pulls

docs/pihole.md

@@ -1,4 +1,4 @@
-# Monitor
+# Pi-hole
 
 This script downloads and runs the [Pi-Hole][pihole] install script from https://pi-hole.net/ .
 ## Installation

docs/zigbee2mqtt.md

@@ -0,0 +1,37 @@
+# Zigbee2mqtt
+
+This script installs the [Zigbee2mqtt bridge][zigbee2mqtt].
+After installation some further configuration is required. Instructions can be found [here][zigbee2mqttdocs].
+
+## Installation
+
+```bash
+sudo hassbian-config install zigbee2mqtt
+```
+
+## Upgrade
+
+No script available, maybe you could write one?
+If so, add an PR here when you are done:
+[homeassistant/hassbian-scripts][repo]
+
+## Additional info
+
+Description | Command/value
+:--- | :---
+Running as: | pi
+Configuration file: | /opt/zigbee2mqtt/data/configuration.yaml
+Start service: | `sudo systemctl start zigbee2mqtt.service`
+Stop service: | `sudo systemctl stop zigbee2mqtt.service`
+Restart service: | `sudo systemctl restart zigbee2mqtt.service`
+Service status: | `sudo systemctl status zigbee2mqtt.service`
+
+***
+
+This install script was originally contributed by [@Landrash][landrash]
+
+<!--- Links --->
+[zigbee2mqtt]: https://github.com/Koenkk/zigbee2mqtt/
+[zigbee2mqttdocs]: https://github.com/Koenkk/zigbee2mqtt/wiki/Running-the-bridge#3-configuring
+[landrash]: https://github.com/landrash
+[repo]: https://github.com/home-assistant/hassbian-scripts/pulls

package/DEBIAN/control

@@ -1,5 +1,5 @@
 Package: hassbian-scripts
-Version: 0.10.0
+Version: 0.11.0
 Priority: optional
 Architecture: all
 Depends: bash, wget, git, python3, python3-venv, python3-pip, python3-dev, bluetooth, libbluetooth-dev, avahi-daemon, build-essential, libssl-dev, libffi-dev, python-dev,libudev-dev, zip, nodejs, apt-transport-https, bluez-hcidump, bc, figlet

package/opt/hassbian/suites/fail2ban.sh

@@ -0,0 +1,81 @@
+#!/bin/bash
+function fail2ban-show-short-info {
+  echo "Setup for fail2ban service."
+}
+
+function fail2ban-show-long-info {
+  echo "This script installs the fail2ban service."
+  echo "Some further configuration is required after installation."
+}
+
+function fail2ban-show-copyright-info {
+  echo "Original concept by Landrash <https://github.com/landrash>."
+}
+
+function fail2ban-install-package {
+echo "Installing fail2ban package"
+apt install -y fail2ban
+
+FAIL2BANFILTER="/etc/fail2ban/filter.d/ha.conf"
+FAIL2BANJAIL="/etc/fail2ban/jail.d/ha.conf"
+
+echo "Creating configuration files"
+if [ -f $FAIL2BANFILTER ] ; then
+    echo "Configuration file exists. Skipping.."
+else
+
+echo "[INCLUDES]
+before = common.conf
+
+[Definition]
+failregex = ^%(__prefix_line)s.*Login attempt or request with invalid authentication from <HOST>.*$
+ignoreregex =" > "$FAIL2BANFILTER"
+
+fi
+
+if [ -f $FAIL2BANJAIL ] ; then
+    echo "Configuration file exists. Skipping.."
+else
+
+echo "[DEFAULT]
+# Email config
+sender = email@address.com
+destemail = email@address.com
+
+# Action %(action_mwl)s will ban the IP and send an email notification including whois data and log entries.
+action = %(action_mwl)s
+
+[ha]
+enabled = true
+filter = ha
+logpath = /home/homeassistant/.homeassistant/home-assistant.log
+
+# 3600 seconds = 1 hour
+bantime = 3600
+#bantime = 30 # during testing it is useful to have a short ban interval, comment out this line later
+
+# Maximum amount of login attempts before IP is blocked
+maxretry = 3" > "$FAIL2BANJAIL"
+fi
+
+echo "Restarting fail2ban service"
+systemctl restart fail2ban
+
+echo "Checking the installation..."
+validation=$(which fail2ban-client)
+if [ ! -z "${validation}" ]; then
+  echo
+  echo -e "\\e[32mInstallation done.\\e[0m"
+  echo
+  echo "To continue have a look at https://www.home-assistant.io/cookbook/fail2ban/"
+  echo
+else
+  echo
+  echo -e "\\e[31mInstallation failed..."
+  echo
+  return 1
+fi
+return 0
+}
+
+[[ "$_" == "$0" ]] && echo "hassbian-config helper script; do not run directly, use hassbian-config instead"

package/opt/hassbian/suites/zigbee2mqtt.sh

@@ -0,0 +1,73 @@
+#!/bin/bash
+function zigbee2mqtt-show-short-info {
+  echo "Setup for Zigbee2mqtt bridge."
+}
+
+function zigbee2mqtt-show-long-info {
+  echo "This script installs the Zigbee2mqtt bridge"
+}
+
+function zigbee2mqtt-show-copyright-info {
+  echo "Original concept by Landrash <https://github.com/landrash>."
+}
+
+function zigbee2mqtt-install-package {
+echo -n "Installing dependencies : "
+node=$(which npm)
+if [ -z "${node}" ]; then #Installing NodeJS if not already installed.
+  printf "Downloading and installing NodeJS...\\n"
+  curl -sL https://deb.nodesource.com/setup_8.x | bash -
+  apt install -y nodejs
+fi
+
+echo "Cloning Zigbee2mqtt git repository"
+git clone https://github.com/Koenkk/zigbee2mqtt.git /opt/zigbee2mqtt
+chown -R pi:pi /opt/zigbee2mqtt
+
+echo "Running install. This might take a while and can produce som expected errors"
+cd /opt/zigbee2mqtt || exit
+su pi -c "npm install"
+
+echo "Creating service file zigbee2mqtt.service"
+service_path="/etc/systemd/system/zigbee2mqtt.service"
+
+echo "[Unit]
+Description=zigbee2mqtt
+After=network.target
+
+[Service]
+ExecStart=/usr/bin/npm start
+WorkingDirectory=/opt/zigbee2mqtt
+StandardOutput=inherit
+StandardError=inherit
+Restart=always
+User=pi
+
+[Install]
+WantedBy=multi-user.target" > $service_path
+
+echo "Checking the installation..."
+if [ ! -f /opt/zigbee2mqtt/data/configuration.yaml ]; then
+  validation=""
+else
+  validation="ok"
+fi
+
+if [ ! -z "${validation}" ]; then
+  echo
+  echo -e "\\e[32mInstallation done..\\e[0m"
+  echo -e "Update of configuration.yaml is required found at /opt/zigbee2mqtt/data/"
+  echo -e "Some further configuration is required and details can be found here https://github.com/Koenkk/zigbee2mqtt/wiki/Running-the-bridge "
+  echo
+  echo -e "Service can be started after configuration but running sudo systemctl start zigbee2mqtt"
+  echo
+else
+  echo
+  echo -e "\\e[31mInstallation failed..."
+  echo
+  return 1
+fi
+return 0
+}
+
+[[ "$_" == "$0" ]] && echo "hassbian-config helper script; do not run directly, use hassbian-config instead"

package/usr/local/bin/hassbian-config

@@ -131,7 +131,7 @@ function raspberry_pi_zero_check {
 if [ "$FORCE" != "true" ]; then
   REVCODE=$(cat /proc/cpuinfo | grep 'Revision' | awk '{print $3}' | sed 's/^ *//g' | sed 's/ *$//g')
   if [ "$REVCODE" = "90092" ] || [ "$REVCODE" = "90093" ] || [ "$REVCODE" = "0x9000C1" ] || [ "$REVCODE" = "9000c1" ]; then
-    if [[ "$1" =~ ^(mosquitto|cloud9)$ ]]; then
+    if [[ "$1" =~ ^(mosquitto|cloud9|zigbee2mqtt)$ ]]; then
       echo "This suite can't be installed on Raspberry Pi Zero..."
       exit 0
     fi