iceSIO replacement board for CASIO 3208 modules (CA-53, CA-506 watches)
- MCU: Microchip PIC16F19197 - 8bit MCU, 56kB flash, 4K RAM, 256b EEPROM
- EEPROM: Microchip 24CW1280T-I/CS0668 - 16KB, WLCSP package
- Accelerometer: NXP MMA8451QT - 3-axis, 14-bit/8-bit digital accelerometer
- Compass: Honeywell HMC5883L or Isentek IST8310 - 3-Axis Digital Compass
- Environment: BOSCH BME280 - Digital humidity, pressure and temperature sensor
- LED:
- ON Semiconductor NCP5623CMUTBG - Triple Output I2C Controlled RGB LED Driver
- Songxin SX-0402-RGB - SMD fullcolor RGB SMD0404 LED
- Battery: CR2016 -> CR2020 / CR2025 / CR2320 upgradable?
- TTL 19200bps UART for debug and evolution.
- RTCC for timekeeping.
- Controls: 2 side buttons + 4*4 keypad
- Timekeeping: Home and World time with automatic DST and assisted calibration
- Perpetual calendar: up to year 2199
- Calculator: Infix, Prefix or Reverse Polish notation (configurable), -9.9999991099 — +9.99999991099 (visual 8 digits mantissa)
- Alarm: 5 daily alarms + 5 weekly alarms + hour signal
- Start/Stop watch: 5 stopwatches up to 23:59:59.59 with 0.01 second resolution
- Timer: 5 countdown timers up to 99:59:59 with 1 second resolution
- Signal: Ring Tone Text Transfer Language (RTTTL) alarm and timer signals
- Minute repeater: audibly chimes the hours and minutes.
- BackLight: full RGB backlight, alarm and timers (configured separately) lights
- Sun: Sunrise and Sunset (Latitude presets + timezone)
- Moon: Precise Moon phase (icon and date)
- Equation of time
- Accelerometer:
- tap-sensing control
- tilt sensor
- speedometer
- continuous accelerometer
- 0-100kmh acceleration/deceleration
- Compass:
- Regular compass
- Angle finder
- Enviromental sensor:
- Current temperature (C°/F°)
- Tranding temperature - hour/12h/24h
- Current Humidity (%)
- Tranding humidity - hour/12h/24h
- Current Barometer (hPA, mBar, at, atm, Torr, mmHg, PSI, inHg)
- Tranding barometer - hour/12h/24h
goodwatch replacement circuit board for the Casio 3208 module, used in the Casio CA-53W and CA-506 calculator watches.
Pluto is a replacement PCB for the Casio F-91W that is also based on an MSP430.