Have you ever wanted to use your keyboard or any other controller as a switch controller? Now you can by using this!
NOTE: This package is simply a wrapper around https://github.com/mart1nro/joycontrol to read and parse the input and send this to joycontrol
- Run
git clone --recurse-submodules https://github.com/indykoning/joycon-controller - Move into the joycontrol folder
- Folow the installation instructions for joycontrol in https://github.com/mart1nro/joycontrol#installation
- Install the requirements for this package
sudo pip3 install -r requirements.txt - Thats it! now you can run
sudo python3 index.py
This module comes with a handy config.yaml file. Here you can set up key bindings and set the "reconnect_bt_addr"
Explanation of the mapping
button_mapping:
keyboard:
backspace: # Backspace keyboard button
input: b # The joycon button "B"
n: # "n" keyboard button
input: nfc # Reload the NFC file in the nfc folder
w: # "w" keyboard button
input: up # Input on a joystick
stick: left # The side of the joystick
reconnect_bt_addr: 00:00:00:00:00:00 # The MAC adress of the switch, after initial connection this allows it to connect automatically
| Type | Available buttons |
|---|---|
| input (button) | a |
| b | |
| x | |
| y | |
| l | |
| zl | |
| r | |
| zr | |
| minus | |
| plus | |
| r_stick | |
| l_stick | |
| home | |
| capture | |
| down | |
| up | |
| right | |
| left | |
| stick | left |
| right | |
| input (stick) | up |
| down | |
| left | |
| right |