Skip to content

Simuino is an Arduino UNO/MEGA Pin Simulator.

License

Notifications You must be signed in to change notification settings

irgendwr/simuino

Repository files navigation

simuino

Docker Pulls

Simuino is an Arduino UNO/MEGA Pin Simulator.

This is a fork of bsaxen/simuino and bsaxen/servuino with some minor imprevements and fixes (e.g. locale/charset issues, missing return values, ...).

Thanks to @DoodleSchrank for helping me fix the locale issue ❤

Note: Simuino currently only works on Linux (i.e. Debian or Ubuntu) or using the Docker Image.

Installation

Linux

First, install the following requirements:

  • g++ (apt-get install build-essential)
  • git (apt-get install git)
  • ncurses-dev or ncurses (apt-get install ncurses-dev)

Then, open a terminal and navigate (using cd) to a folder of your choice.

Clone this repository: git clone https://github.com/irgendwr/simuino.git

And enter the folder: cd simuino

Now compile the program: make

And then run it: ./simuino

Windows

Windows is currently not supported. Either use a Linux VM, WSL or docker.

Docker

The docker image can be run as shown here:

docker pull irgendwr/simuino
docker run -it --rm -v /sketchbook:/simuino/sketchbook --name simuino irgendwr/simuino

More details are available on the simuino docker hub page.

Usage

Run the file with ./simuino (assuming you are in the folder in which you downloaded it)

A typical use case is:

Type help to get a list of available commands.

  1. Type list to see available sketches

  2. Choose sketch according to number given in list, type the number of your sketch and confirm with return (enter key).

  3. Type load to load (copy/compile/run) the sketch

  4. Type run to enter Run Mode. The prompter changes to R.

In Run Mode, you can step through the simulation in different ways.

f - step forward
b - step backward
r - loop forward
p - loop backward
a - goto step 1
z - goto last step
t - analogRead/digitalRead stepping
R - animation of loop
s - debug window

Press h to see the list of available commands.

You can quickly switch between window layouts by pressing w . There are 6 different to choose between. The digit in the prompter shows the number of the window layout (0,1,2,3,4,5).

Note: Sketches should be placed in folder <your path>/simuino/ sketchbook. Sketches should be added with comments according to Simuino configuration, in order to control simulation length, scenario and name of sketch. The extension of the sketch file is .ino.

Quote from the simuino guide.

Note: This will mount the sketchbook folder on your local system at /sketchbook/.

Links

Useful links to the original documentation:

License

From the original repository:

Copyright (C) 2012 Benny Saxen

This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program. If not, see http://www.gnu.org/licenses/

You are welcome to redistribute it, as long as it is named Simuino.

Releases

No releases published

Sponsor this project

 

Contributors 4

  •  
  •  
  •  
  •  

Languages