ENC28J60 Multicast DNS

This library uses code from the CC3000 Multicast DNS library, originally created by Tony DiCola.

This is a simple implementation of multicast DNS query support for an Arduino and ENC28J60 ethernet module. Only support for resolving address queries is currently implemented.

Usage

To use this library, you must use a version of the EtherCard library that includes my UDP enhancements. So be sure that add that library as well as this one to your Arduino IDE.

After that it's as easy as including both libraries and adding the following code to the bottom of your setup() method (or at least after you have acquired an IP address):

if(!mdns.begin("some-name", ether)) {
    Serial.println("Error settings up MDNS responder");
} else {
	Serial.print("Listening on some-name.local");
}

Note: the second argument (ether) refers to an instance of EtherCard. Optionally, you can supply the TTL as a third argument to mdns.begin.

Be sure to also have a look at the example I've included.

License

Just like the original library by Tony DiCola, this library is released under a MIT license.