HBRC ROS Robot Platform

The HBRC ROS Robot platform (ie. HR² or just plain HR2) is a pedagogical robotic platform for teaching various robotics skills.

This top level document is broken into the following sections below:

• Google Group: The Google Group mailing list for this project.

• Goals/Requirements: The goals and requirements for the project.

• Mechanical: The mechanical engineering aspects of the project.

• Electrical: The electrical engineering aspects of the project.

• Software: The software engineering aspects of the project.

• Education: The education components of the project.

• Download, Installation and Workflow: The download, installation, and workflow portions of the project.

Google Group

There is a Google Groups mailing list to discuss this project at HbrcRosRobotPlatform@GoogleGroups.Com. To join the group, visit the HBRC ROS Robot Platform web page (i.e. https://groups.google.com/d/forum/hbrcrosrobotplatform) and request to join. If that does not work, squirt a quick message to the group manager (Wayne AT_SIGN Gramlich PERIOD Net) requesting an invitation to join the group.

Not all traffic on the group is going to be interesting to everybody else. To help out with filtering please put one of the following prefixes at the front of the each subject line:

• ALL: A message of interest to everybody.
• INST: A message concerning software installation.
• ME: A message to people interested in the HR2 Mechanical Engineering (i.e. solid modeling.)
• EE: A message to people interested in the HR2 Electrical Engineering (i.e. PCB design, manufacture, bring-up, testing, etc.)
• SE: A message to people interested in the HR2 Software Engineering (i.e. programs, firmware, etc.)
• ED: A message to people interested in the HR2 course materials.
• DEV: A message concerning downloading, installation, and development.
• MSC: A miscellaneous message that does not really fit any of the above protocols.

That should be enough group mailing list structure for starters.

Goals/Requirements

The list below summarizes the some of the design choices that have been made so far.

• Start with the Pololu Romi platform used by FPGA class. [Decided]
• Use Patrick's PCB breakout board as a starting point. [Done]
• Consider ditching the Pololu motor board. [Done]
• Work hard to see if the Pololu arm can be bolted on. [Very Likely]
• Try to use USB battery pack instead of AA batteries. [USB Pack yes; AA's no]
• Provide support RasPi 3B+ and RasP4: [yes]
  • 40-pin connector.
  • I2C EEPROM for "hat" identification.
  • Real Time Clock needed for ROS.
  • Various RasPi I2C, SPI, GPO, Serial lines made available.
    • [Serial: yes, I2C: yes, SPI: probably not, GPIO: OS shutdown
• Some sort of MPU on board:
  • Off the shelf microcontroller board [STM Nucleo-144 Dev. Board format selected]
  • Roomy enough to run MicroPython/MicroROS [STM NUCLEO-F767ZI nominal]
    • ~$25, 216MHz, 2MB Flash, 512K RAM, timers, UARTs, I2C, SPI, Ethernet, etc.
  • Must support C/C++ debugging [ST-Link].
  • Ethernet Phy to talk to boards other than RasPi [Yes]
• FPGA support [custom daughter board required.]
• Arduino support [AVR Dropped. AVR's are expensive/under powered]
• Expansion Capabilities:
  • Arduino Shields. [One can be plugged onto Nucleo.]
  • MikroBus [Iffy, space is tight]
  • Demand Peripherals Connector(s): [On FPGA daughter boards only]
  • Wayne's Bus? [Iffy, space is tight; ouch this hurts!]
  • Grove connectors [Very Likely]
  • Pololu power supply sockets [Iffy, space is tight.]
• Sensors:
  • Motor encoders. [Yes, 1440 step/rev.]
  • Various edge sensors for table top challenge, maze follower, etc.
  • Edge sensors (TOF, IR)
  • Sonars, the are cheap [5 in front, 4 in back.]
  • Servos (arm, camera tilt) [Minimum 4 required]
  • Inexpensive Lidar [Only if the platform is not overloaded]
    • YLidar X2 (~$70)
    • RPLdar A1M8 (~$100)
  • E-Stop [Probably not]
• Camera [RasPi Camera]
• Misc:
  • What issues are missing?

Mechanical

The mechanical issues are worked out in greater detail in the mechancial directory.

The mechanical tasks are:

• Model the Romi platform in OpenSCAD to ensure that the PCB outline and mounting holes are correct.
• Model the Romi arm in OpenSCAD to make sure that the Arm does not interfere with anything.
• Model both a RasPi 3B+ and RasPi4 for attaching to PCB.
• Model the basic PCB outlines, connector placements, etc.

A short summary of the mechanical design decisions to date are:

• Use the Pololu Romi Platform.
• Use an alternate layout of the motor encoder PCB to free up space to support some SBC (Single Board Computers) that are larger than the Raspberry Pi footprint.
• Design master board to use an STM Nucleo-144 development board for the processor. All H-bridges, power management, to be put on one board.
• FPGA boards to be done with a a daughter board that plugs into Nucleo-144 board.

Electrical

The electrical issues are worked out in greater detail in the electrical directory.

Some brief comments on the electrical aspects are:

• The design is to be done using KiCad, since KiCad is 100% free.
• It would be nice to be able to use a simple two layer PCB.
• It would be nice to be able to take power from a USB Power pack.
• It would be nice to support daughter boards for FPGA's.

The overall strategy is to prototype everything using the Bantum Labs PCB Milling Machine over at OLogic. This machine is constrained to only prototyping boards that are 4 inches by 5 inches. Once the electronics are debugged and working, the PCB's will be sent out to an appropriate PCB Manufacturing house.

Software

This section is pretty brief for the moment...

The software issues are worked out in greater detail in the software directory.

Terminology:

• Single Board Computer (SBC): The nominal SBC for the platform is either the RasPi 3B+ or the RasPi 4. Other boards that are compatible with the RasPi pin-out can be supported, but somebody will have to step up to the task of doing the actual support. The SBC resides on the robot.
• Micro-Processor Unit (MPU): This is the micro-controller that is on the main board. The nominal processor is ST32Fxxx, where xxx is to be decided. The MPU resides on the robot.
• Robot Processors: The robot processors are the SBC and the MPU.
• Development Processor: The development processor is not physically attached to the robot. Instead, it communicates with the robot SBC via WiFi.

The software goals are:

• The platform runs ROS on the SBC.
  • Both ROS 1 and ROS 2 are goals with ROS 1 eventually being deprecated.
• We need to be able download firmware into the MPU from the SBC. This needs to be hands off.
  • Custom C/C++ drivers.
  • MicroPython.
  • Micro ROS.
• The development processor needs to be able to debug code running on the robot:
  • Debugging ROS nodes running on the SBC should be relatively easy.
  • Debugging C/C++ code running on the MPU is going to need JTAG support. This can be done with a JTAG chip like the FTDI FT2232. This may be an "add-on". OpenOCD can talk to this JTAG chip and gdb can talk to openocd.
  • Debugging MicroPython is tough. It currently supports breakpoints but does not support data/stack inspection (yet!)
  • As a total stretch, it would be nice to support ARM ETM CoreSight. This requires a seriously expensive brick that weighs a ton. It is probably a fantasy.
• We need to support FPGA development:
  • We need to be able to download the FPGA chip from the SBC.
  • The FPGA compliation stack needs to run on the SBC and the development processor.

Education

This section is more of a place holder for now...

A partial list of possible educational classes for HR2 platform are:

• Low level robot peripheral drivers.
  • C/C++
  • Micropython
• ROS driver development
  • C/C++
  • Python
• More generic ROS Programming
• Image processing with OpenCV
• AI Frameworks
• Arm manipulation
• PCB design
• MCAD design
  • OpenSCAD
  • Fusion 360
  • FreeCAD
• FPGA class
• Soldering Skills
  • Basic Through Hole
  • Surface Mount
• Rapid PCB prototyping w/Bantum Labs
• etc.

Download, Installation, and Workflow

Software downloading and installation is done using the following basic steps.

1. Optional Ubuntu Virtual Machine Installation: For now, this project is developed exclusively using a Ubuntu 18.04LTS (Long Term Support) Linux distribution. If you are not running Ubuntu 18.04LTS, you need to install it so that it runs using a virtual machine emulation software. Otherwise, this step can be skipped.

2. Download and Install Software: The HR2 project uses a diverse set of software. This software is installed using some installation scripts followed by some tried and true technology called recursive Make.

3. Workflow: Modifications to the documention and design files is done using the GitHub pull request workflow.

Optional Ubuntu Virtual Machine Installation

If you are running on either Windows or MacOS or a non-Ubuntu 18.04LTS Linux distribution, you need to install Ubuntu 18.04LTS using virtual machine emulation software. If you are already running Ubuntu18.04LTS, you can skip this section right now.

There are many (virtualization)[https://en.wikipedia.org/wiki/Comparison_of_platform_virtualization_software] software products out there. If you have a favorite, please feel free to use your favorite virtualization product. If you have no favorite, (VirtualBox)[https://www.virtualbox.org/] is freely available and works. The remaining instructions are in this section are for VirtualBox.

Let's start off with some terminology:

• Host Machine: The host machine is the actual hardware and associated operating system that VirtualBox is running on.

• Guest Machine: The guest machine is the virtual hardware and associated operating system that is running under the VirtualBox software. In this case, the guest machine is running Ubuntu18.04LTS.

The basic steps involved are:

1. Download VirtualBox: Visit the [VirtualBox Downloads] web page and follow the instructions appropriate for your host machine.

2. Download Ubuntu18.04LTS: Download Ubuntu18.04 LTS to your host machine. This shows up as a file with an .iso suffix.

3. Configure a VirtualBox Virtual Machine. Start VirtualBox software and a Graphical User Interface (GUI) should show up on your screen.

   Click on the [New...] button to bring up create pop-up window.

   A. Name and operating system:

   • Name: Pick a name, (suggestion: "Ubuntu18.04LTS").
   • Machine Folder: (Use the default.)
   • Type: Pick [Linux]
   • Version: Ubuntu (64-bit)
   • Click on [Next>].

   B. Memory size:

   • At least 4096 MB is recommended. Do not use 1024 MB.
   • Click on [Next>]

   C. Hard disk:

   • Select "Create virtual hard disk now".
   • Click on [Create]

   D. Hard disk file type:

   • Select "VDI (VirtualBox Disk Image0" *Click on [Next>]

   E. Storage on physical hard disk:

   • Select "Dynamically allocated" *Click on [Next>]

   F. File Location:

   • Use the default file folder.
   • Increase the file size to at least 20 GB. 30 GB or 40 GB is preferred.
   • Click on [Create] to create the virtual machine and dismiss the pop-up window.

   G. Configure network:

   • Click on the [Settings...] Button to bring up [Settings] pop-up window:
   • Change "Attached to:" from "NAT" to "Bridged Adapter"
   • Click on [OK] to dismiss the pop-up window.

   The virtual machine is configured and ready to run.

4. Install Ubuntu18.04LTS.

   A. Start the virtual machine by either double clicking on the machine name or clicking on the [Start] button. Please note that the guest machine and host machine can fight over who has the keyboard and mouse. There are two control keys on your keyboard, one to the left of the space bar and the other to the right of the space bar. The right control key is used break up the fighting over mouse/keyboard input destination. If you are going "what happened to my mouse cursor are where are my keystrokes going" use the right control key to change things.

   B. After starting the virtual machine, VirtualBox will bring up a pop-up window asking you to select a virtual CD Rom image to to insert into the virtual optical disk drive. Please use the file choose to select the Ubuntu 18.04LTS .iso file you previously downloaded.

   C. Click on [Install Ubuntu].

   D. Select your keyboard.

   E. Select: "Normal installation and download updates".

   F. Select: "Erase disk and install Ubuntu".

   • (Since this is virtual machine you can safely ignore the scary warning.)
   • Select Click on [Install Now]
   • Click on [Continue].

   G. Time Zone: *Select the correct time zone.

   H. Account setup:

   • Your name: Use your properly capitalize first and last name.
   • Your computer's name: Using a lower case name pick a name for the computer. For exam
   • Pick a user name: All lower case and one word.
   • Choose a password...: Type in your password twice.
   • Select "Require my password to log in".

   H. The installation takes some time.

   I. Click on [Restart Now]

   J. Ignore the "Please remove the installation medium" message, just press [Enter].

   K. Just type [Enter] for the Grub splash screen.

   L. Click on you user name and type in your password.

   M. Click through the startup screens.

   N. If the software updater window pops up click on [Install Now] and type in your password. If it pops up a restart machine window, just ignore it for now.

5. Install Guest Additions

   The guest extensions provide a more seamless integration between VirtualBox and the host machine. For some reason, the documentation at for VirtualBox guest extension installation is actually pretty confusing. Please try the instructions below:

   A. Bring up a terminal window by typing [Ctrl-Alt-T] (use the left [Ctrl] key.)

   B. Type the following commands. sudo will probably prompt you for your password.

   • sudo apt update
   • sudo apt install build-essential dkms linux-headers-$(uname -r) --yes

   C. Click on [Devices => Insert Guest Additions CD Image...]

   D. It should ask if it is OK to run some files. Click [OK].

   E. Type in your password and click [Authenticate]. This can take a while.

   F. Type [Enter] when [Press Return to close this window...] shows up. If your virtual machine reboots you can skip the next step.

   G. (Optional) If for some reason the virtual guest extensions do not properly install. The following commands provide and alternative way of getting them installed. Now run the following commands:

   • sudo mkdir -p /tmp/cdrom
   • sudo mount /dev/cdrom /tmp/cdrom
   • sudo sh /tmp/cdrom/VBoxLinuxAdditions.run --nox11
   • sudo shutdown -r now

   The machine should reboot.

   H. Select your user name and login with your password.

   I. Resize the virtual machine window to make sure the guest additions have taken hold. The background window should fill as it resizes. If not, it will stay at a fixed size and something has gone wrong with your guest additions install.

   J. In the upper right corner there is a downward pointing triangle. Click on it and select [power off].

   Your virtual machine is installed and in a powered down state.

6. Make a clone.

   Installing all of the software is sufficiently painful that it is desirable to avoid having to do it again. VirtualBox allows you to make a clone of an existing system so that the original system can be reused in the future. It is really easy and does not consume very much extra disk space, so making a clone is strongly recommended.

   A. Bring up the VirtualBox manager window again.

   B. Right mouse click on the name of your virtual machine:

   • Name: Give the clone a new name like "Ubuntu18.04LTS_HR2"
   • Path: Use the default
   • MAC Address Policy: Use the default
   • Leave the additional options unclicked.
   • Click [Next>] to go to the next pop-up window.

   C. Clone type

   • Select [Linked clone]. This saves lot's of disk space
   • Click on [Clone] to finish the clone.

   D. Now start the clone by by double clicking on it.

Download and Install Software

The software is generally deployed in three broad catagories:

• Ubuntu packages: for basic tools and software (e.g. Kicad, OpenSCAD, etc.)
• Cloned Git Repositories: this project and some projects it depends upon used git repositories.
• Python pip packages: There is lots of Python 3 code sprinkled around this project and a bunch of it is packaged up as Python packages that can be installed with the Python pip program. (By the way, pip stands for Pip Installs Packages.) There is heavy use of a technology called Python Virtual Environments.

There will be a number of cloned git repositories and they need to reside as separate sub-directories under one parent repository directory. (One parent directory to rule them all!) You can call this parent directory whatever you want -- repos, projects, funstuff, sauron, etc. For the directions below we use REPOS for this parent directory name. Please substitute the directory name you picked for REPOS in the directions below:

Clone

There are 3 broad steps:

1. The first step is to clone the hbrc_ros_robot_platform repository. Let's get going:

    cd .../REPOS   # Change the current working directory to REPOS
    # We need to get `git` installed.
    # If `git` is already installed, skip the install below:
    sudo apt install git --yes # You may be asked for you user password:
    # Now "clone" the `hbrc_ros_robot_platform` repository using `git`:
   

   git clone -o upstream https://github.com/hbrobotics/hbrc_ros_robot_platform.git # Change the current working directory to the root of the cloned repository cd hbrc_ros_robot_platform

   Set your git user name and email. Please run the following two commands:

    git config --global user.name "Your Name"
    git config --global user.email "youremail@yourdomain.com"
   

   Fill in "Your Name' with your actual name and "youremail@yourdomain.com"

    # with your actual E-mail address.
   

2. The second step is to run one hr2_install script. This is done by

   ./bin/hr2_install OPTION

   where OPTION is one or more of the following:

   • all: Installs everything
   • most: Installs everything but dev
   • dev: Installs the development workflow (a personal Git.Hub account is required.)
   • ee: Installs all of the software needed for electrical engineering
   • me: Installs all of the software needed for mechanical engineering
   • sw: Installs all of the software needed for software development

   Many people select the most option.

   Downloading everything takes quite a while (frequently in excess of half an hour.) Sometime you will be prompted for your user password so that the system can install some system software. The stm32cubeide software (selected by ee, me) is particularly slow.

3. After the hr2_install script terminates ( This is important. You need to activate your Python Virtual environment. This is done as follows:

   source ~/.bashrc workon hr2 # Activate the hr2 Python virtual environment

4. After that yo can use the make program to do any remaining buidling.

   Use the make program to recursively build everything by typing:

       make everything
   

   For the first time through, we use the everything target:

    make `everything`  # Force everything to be recursively made.
   

Installing is a notoriously fragile process and it is quite possible that something can go wrong. If so, please send a message to the group list with the DEV: prefix on the subject line explaining the issue so it can be resolved.

Workflow

Workflow is a generic term for how modifications are made to this project.

Examples of such modifications are.

• Modifying the mechanical models,
• Modifying electrical design and associated printed circuit board designs,
• Modifying the software,
• Fixing documentation errors,
• Developing educational course materials, Etc.

Some terminology here. We are going to use the pronoun "you" to mean "you the person doing project development" in the description below.

Workflow Introduction

There are two common workflows supported by github.com:

• Shared Repository Workflow: This is the simplest model where there is one common shared parent repository stored at github.com and you have local cloned copy of the shared parent repository stored locally on your development machine. You develop and test your changes on your local machine. When you decide your changes are "ready", you "push" the changes back up to the shared parent repository on github.com. Over time, you and other developers "pull" the accumulated changes stored in the parent repository down into your respective local repositories to stay up to date. This workflow is extremely common and has been supported by many version control systems for literally decades.

• Fork and Pull Request Workflow: In this model, the common parent repository is the same as the shared repository workflow immediately above. However, there now you need two repositories to do development. The first repository is the same local repository on your local machine as before. In addition to your local repository, you also have your own semi-private repository stored on github.com that is used for staging purposes. This staging repository is goes by a less descriptive name called a "fork repository". Your fork repository is "connected" to the shared parent repository. Since there are multiple developers, there multiple "forks" of the same shared parent directory on github.com, where each is stored in a different user account to keep them separate from one another.

  The workflow is that you make modifications to your local repository and "push" them up to your staging "fork" repository. Next, you generate something called a "pull request". (Frankly, the term "pull request" is miss-named, it should be called a "merge request". It is too late to change the terminology now, so we will stick with the less descriptive term of "pull request".) The details of how to generate a "pull request" are discussed little be further below. The "pull request" generates an E-mail that is sent to one or more reviewers. The reviewer looks at your changes using the github.com GUI (Graphical User Interface.) If the reviewer likes the changes, they are immediately accepted and merged from your fork repository to the shared master repository. If any reviewer has some issues, an E-mail dialog ensure where the reviewer says things like "I really like this!", "This won't work because ...", "Fix this tiny issue", "What about doing it this way...", and an occasional "No way because..." As a result of some of the review comments, you may need to make additional changes and push them up to the fork repository. When the pull-request E-mail exchange dialog dies down and all of your changes have been pushed up to your fork repository, the reviewer accepts the changes and merges them into the shared parent repository. The "Fork and Pull Request Workflow" is shown immediately below using some crude ASCII art:

            [Shared Parent]<---------------[Simi-Private Fork]   github.com
                   |                                ^
            ====== | ============================== | =====================
                   v                                |
                   +--------->[Private Local]------>+         Local Machine
                    
                     Fork and Pull Request Workflow
  

The key advantage of the Fork and Pull Request work flow is that you do not need permission from anybody to start making your changes. You start your changes locally and ask for permission only after you think they are ready. When the reviewer agrees, your changes are merged in.

It should come as no surprise to you that this project is using the fork and pull request workflow.

Workflow Setup

If you have followed the download and install instructions above, you have a local copy of the hbrc_ros_robot_platform repository as a sub directory under your REPOS directory. What you do not have is a staging fork repository AND you have not configured git to do an asymmetric pull and push. The instructions below will remedy these issues.

Most of the tools you need to do the Fork and Pull Request workflow are already mostly in place. The primary tools are git and a program called hub which is a command line interface to the github.com functionality. We will do as much of the set up using a command line tools as possible because the command line tools tend not to change as fast as the web interface changes. (If you are already comfortable the github.com web interface, you can probably skip some of the steps below and use the web interface instead.)

There are a still a few manual steps to do:

1. The first step is to create your own personal account on github.com. This is done visiting the main github.com web page web page. You need to specify a unique "Username" (all lower case with no spaces or punctuation is recommended), an "Email" address, and a "Password". There will be a message sent your E-mail address that you must respond to with a response E-mail to finish the account creation. The "Username" is your github.com account name and will be needed further below. Do not log out of github.com yet.

2. In order to avoid having to type in a password all the time, we need to set up your computer to use an SSH key to talk to your github.com account. The install scripts have ensured that an SSH key has been generated. The public key is stored at ~/.ssh/id_rsa.pub. There is a github.com SSH Key Installation web page that will guide you through the github.com web interface to install your public SSH key. It is a little tedium for now, but will avoid much password prompting annoyance in the future. If we are lucky, you should not need to deal with the github.com web interface any more. Now you can disconnect from github.com.

3. Add GITHUB_ACCOUNT_NAME variable definition to your ~/.bashrc file. This is typically done a the end of the file by adding a line that looks like:

   GITHUB_ACCOUNT_NAME=whatever_you_typed_in_in_the_previous_step source ~/.bashrc # Do no forget this step.

4. Specify your user.name and user.email values for git. If you have previoulsy done this, there is no need to do it again. The two commands are:

   git config --global user.name "Your Name" git config --global user.email "YourEmail@WhereEver"

5. Please rerun one of the installation scripts install_all.sh, electrical/install_ee.sh of mechanica/install_me.sh. They will create your remote fork repository on github.com and create git remote link named staging that points to it. (Run git remote -v to see it.)

That pretty much wraps up the additional steps need to enable the "Fork and pull-request" workflow. Next, it is time to try it out.

Workflow Usage

The git program does a great deal of stuff and it is outside the scope of this document to attempt to cover it all. Instead, we will explain just enough to get started.

If you have followed the steps above, you have a repository named hbrc_ros_robot_platform sitting on you local machine.

• An upstream remote descriptor that points to the shared project repository.
• A staging remote descriptor that points to the simi-private forked directory that is used for staging purposes.
• A master branch which has be set up so that it only accepts updates from the upstream remote.

The first thing to understand is that you should never to development on the master branch. We have tried to make it difficult for you to screw up master, but somebody who really wants to can screw it up anyhow.

The second thing to understand is that all development takes place in one or more side branches, called development branches. The way to create a new branch is by

 git checkout -b NEW_BRANCH_NAME master

where you supply a new and hopefully descriptive name for the new development branch. After this command, the new branch will be active. Now you can modify things to your hearts content. You can check the files in as many times as you want. You can perform as many commits as you want on the branch. Please put descriptive comments in the commit logs.

When you think you changes are ready to be merged into the project you initialiate a pull-request. This is done by the command:

 pull_request

This command is in the repository bin directory. This will push your commit up to the staging repository and generate a pull request. You will have add a comment into the pull request via an editor that will pop up.

That is basically it.

Coding Style

The vast majority of the code is written in Python, C, and some Shell scripts.

• Python: Python 3 only. All of the code is pushed through mypy (with type-hinting), flake8 to catch coding issues, and pydocstyle to catch documentation issues. In general, the pretty standard coding style for Python is used. One quirk is that Wayne Gramlich hates the self variable and usually assigns it to a more descriptive variable name. Other than that, it is pretty standard.

• C: Pretty standard C coding style is used. There are 4 spaces for each indentation level. The "then" clause of an if statement always has {...}, no exceptions.

• Shell: Shell scripts are tedious to write and debug and still tend to be fragile. Lot's of comments are used.

All documentation is written in markdown. Speaking of document, it is treated just like code in that it has bugs in it as well (miss-spelled words, bad grammar, unclear desciptions, etc.) The documentation is fixed the same way that code is fixed, using the standard workflow.

Eventually we will use the Github issue tracker to track both code and documentation issues. For now, the group mailing list will be used instead.