WireGuard Zero

A WireGuard UI with zero extra configuration. Fork of "the easiest way to install & manage WireGuard" project wg-easy!

Features

• Zero-extra configuration. Clone it, install it, run it.
  • Easy migration from an unmanaged configuration.
  • Alternatively, Docker All-in-one: WireGuard + Web UI.
• Easy installation, simple to use.
• List, create, edit, delete clients.
• Connection statistics for connected clients.
• Configurable private key retention.
• Read-only mode.
• Simple manual configuration when editing wg0.conf directly.

Requirements

• A host with a kernel that supports WireGuard (all modern kernels).
• A host with Docker installed.

Installation

There are two ways to run WireGuard zero, for new installations we recommend The Docker Way to keep your system simple, for existing installations, we recommend the The Host Way

The Docker Way

1. Install Docker

If you haven't installed Docker yet, install it by running:

$ curl -sSL https://get.docker.com | sh
$ sudo usermod -aG docker $(whoami)
$ exit

And log in again.

2. Run WireGuard Zero

To automatically install & run wg-zero, simply run:

$ docker run \
    --name=wg-zero \
    -p 51820:51820/udp \
    -e WG_PORT=51820 \
    -p 51821:51821/tcp \
    -e PORT=51821 \
    -v $PWD/mount/wireguard:/etc/wireguard \
    -e WG_HOST=$(curl checkip.amazonaws.com) \
    -e PASSWORD="your_secure_password_here!!" \
    --cap-add=NET_ADMIN \
    --cap-add=SYS_MODULE \
    --sysctl=net.ipv4.ip_forward=1 \
    --sysctl=net.ipv4.conf.all.src_valid_mark=1 \
    --sysctl net.ipv6.conf.all.disable_ipv6=0 \
    --restart unless-stopped \
    jasoryeh/wg-zero

💡 If your want to manually specify the server's public IP Address, replace `$(curl checkip.amazonaws.com) with a public facing IP address, a public domain pointing to the server, or a Dynamic Domain pointed at this server.

💡 Replace your_secure_password_here!! with a different password!

The Web UI will now be available on http://0.0.0.0:51821.

The Host Way

1. Clone It

Clone this repo!

git clone https://github.com/jasoryeh/wg-zero.git && cd wg-zero

2. Install It

npm install

3. Run It

bash ./start.sh

To configure additional options below, prefix the command above with your option in KEY1=VALUE1 KEY2=VALUE2 form, e.g.

WG_READONLY=true WG_PASSWORD=password123 WG_HOST=wireguard.yourdomain.example.com bash ./start.sh

More Information

That's it! See below or server/config.js for configurable options you can use to run WireGuard Zero.

Options

These options can be configured by setting environment variables using -e KEY="VALUE" in the docker run command.

Env	Default	Example	Description
PASSWORD	-	foobar123	When set, requires a password when logging in to the Web UI.
WG_HOST	-	vpn.myserver.com	The public hostname of your VPN server.
WG_PORT	51820	12345	The UDP port the actual Wireguard VPN server will listen to.
PORT	51821	12345	The port on which the Wireguard GUI will listen to.
WG_INTERFACE	wg0	wg0	Manually specify the interface name for the Wireguard server.
WG_INTERNET_INTERFACE	eth0	eth0	Manually specify the network interface that this application will attempt to configure for use with the Wireguard VPN server. This may be needed if you use a different network mode that just forwarding the port, such as host.
WG_ADDRESS_SPACE	10.1.3.1/24	10.1.1.1/24	Specify the address space that clients should use.
WG_PRE_UP	...	-	See config.js for the default value.
WG_POST_UP	...	iptables ...	See config.js for the default value.
WG_PRE_DOWN	...	-	See config.js for the default value.
WG_POST_DOWN	...	iptables ...	See config.js for the default value.

Defaults:

Env	Default	Example	Description
WG_DEFAULT_MTU	null	1420	The default MTU the clients will use.
WG_DEFAULT_PERSISTENT_KEEPALIVE	0	25	The default keep-alive value for clients.Value in seconds to keep the "connection" open. If this value is 0, then connections won't be kept alive.
WG_DEFAULT_DNS	1.1.1.1	8.8.8.8, 8.8.4.4	The default DNS server clients will use.
WG_DEFAULT_ALLOWED_IPS	0.0.0.0/0, ::/0	192.168.15.0/24, 10.0.1.0/24	The default Allowed IPs clients will use.

If you change WG_PORT, make sure to also change the exposed port.

Updating

To update to the latest version on Docker, simply run:

docker stop wg-zero
docker rm wg-zero
docker pull jasoryeh/wg-zero

And then run the docker run -d \ ... command above again.

To update to the latest version without Docker:

git pull 

Then run your start.sh script again!

Contributor Brief

This section is intended as a briefing for contributors looking to contribute to this repository at jasoryeh/wg-zero.

Notes

This is a primarily Javascript application. The goal of this project is to provide the easiest UI to add to a WireGuard server and minimize configuration.

Structure

This repository contains two components of wg-zero, a web component and a server component. There are no additional configuration files, any additional information is also stored inside of the WireGuard configuration file as a comment.

To summarize briefly:

• The *server component interacts with the WireGuard server and configuration
  • Exposes an expressjs application
  • Handles parsing of configuration and actions performed on the server
• The web component is the user interface only, and outside servers can be used via ?endpoint=https://wg.example.com
  • A vite web application at its core
• The configuration is solely read from wg0.conf
  • Additional information is stored prefixed with a #! in the format Key = Value format inside of the .conf file.
    • e.g. The name of peers are stored inside the .conf as #!Name = Profile Name under each peer
  • Disabled properties are prefixed with a #$ but still read but marked not enabled

Development

The recommended environment for developing for this repository is to develop with the server running in Docker, and vite watching on the web directory on the host.

Vite & WireGuard in Docker

1. In one terminal instance: ./enter_dev.sh bash then run cd server && npm i && npx nodemon
2. In another instance: cd web && npm i && npx vite

Full Container

To spin up a container with both the GUI and Wireguard VPN server running, and additionally, have nodemon and vite running:

./enter_dev.sh ./dev.sh

Contributions

Welcome! This fork of wg-easy aims to be much more flexible, feature-rich, configurable than the original repository whilst retaining it's "easy" title. All contributions are welcome!

Fork Goals:

• Minimize external non-WireGuard configuration (maintain one configuration file as much as possible: /etc/wireguard/wg0.conf)