ipmitool_sensor_ is a wildcard-plugin to monitor sensors by using ipmitool.
The possible wildcard values are the following: fan, temp, volt. So you would create symlinks to this plugin called ipmitool_sensor_fan, ipmitool_sensor_temp, and ipmitool_sensor_volt.
ln -s /usr/share/munin/plugins/ipmitool_sensor_ /etc/munin/plugins/ipmitool_sensor_fan
ln -s /usr/share/munin/plugins/ipmitool_sensor_ /etc/munin/plugins/ipmitool_sensor_temp
ln -s /usr/share/munin/plugins/ipmitool_sensor_ /etc/munin/plugins/ipmitool_sensor_volt
Add the following to your /etc/munin/plugin-conf.d/munin-node:
Note: When you use this, the threshold provided by the sensor board is not used.
[ipmitool_sensor*]
user root
timeout 20
If you want to use "ipmitool sdr", add the following:
[ipmitool_sensor*]
user root
timeout 20
env.ipmitool_options sdr
ipmitool - ipmitool command (default: ipmitool)
ipmitool_options - ipmitool command options (default: sensor)
sdr: you can use 'sdr' instead of sensor.
cache_file - cache file
(default: /var/lib/munin/plugin-state/plugin-ipmitool_sensor.cache)
cache_expires - cache expires (default: 275)
fan_type_regex - Regular expression for unit of fan (default: RPM)
temp_type_regex - Regular expression for unit of temp (default: degrees C)
volt_type_regex - Regular expression for unit of volt (default: (Volts|Watts|Amps))
fan_warn_percent - Percentage over mininum for warning (default: 5)
fan_lower_critical - Preferred lower critical value for fan
fan_upper_critical - Preferred upper critical value for fan
temp_lower_critical - Preferred lower critical value for temp
temp_lower_warning - Preferred lower warining value for temp
temp_upper_warning - Preferred upper warning value for temp
temp_upper_critical - Preferred upper critical value for temp
volt_warn_percent - Percentage over mininum/under maximum for warning
Narrow the voltage bracket by this. (default: 20)
cache_file=ipmitool_sensor_ cache_expires=-1 ./ipmitool_sensor_fan
cache_file=ipmitool_sensor_ cache_expires=-1 ./ipmitool_sensor_fan config
cache_file=ipmitool_sensor_ cache_expires=-1 ./ipmitool_sensor_fan suggest
cache_file=ipmitool_sensor_ cache_expires=-1 ./ipmitool_sensor_fan autoconf
cache_file=ipmitool_sensor_ cache_expires=-1 ./ipmitool_sensor_fan config
fan_warn_percent=50 fan_lower_critical=100 fan_upper_critical=1000 \
cache_file=ipmitool_sensor_ cache_expires=-1 ./ipmitool_sensor_fan config
cache_file=ipmitool_sensor_ cache_expires=-1 ./ipmitool_sensor_temp config
temp_lower_warning=1 temp_lower_critical=2 temp_upper_critical=71 temp_upper_warning=72 \
cache_file=ipmitool_sensor_ cache_expires=-1 ./ipmitool_sensor_temp config
volt_warn_percent=50 \
cache_file=ipmitool_sensor_ cache_expires=-1 ./ipmitool_sensor_volt config
lnr Lower Non-Recoverable
lcr Lower Critical
lnc Lower Non-Critical
unc Upper Non-Critical
ucr Upper Critical
unr Upper Non-Recoverable
# HP ProLiant ML110 G5
CPU FAN | 1434.309 | RPM | ok | 5537.099 | 4960.317 | 4859.086 | na | 937.383 | na
SYSTEM FAN | 1497.454 | RPM | ok | 5952.381 | 5668.934 | 5411.255 | na | 937.383 | na
System 12V | 12.152 | Volts | ok | na | na | na | na | na | na
System 5V | 5.078 | Volts | ok | na | na | na | na | na | na
System 3.3V | 3.271 | Volts | ok | na | na | na | na | na | na
CPU0 Vcore | 1.127 | Volts | ok | na | na | na | na | na | na
System 1.25V | 1.254 | Volts | ok | na | na | na | na | na | na
System 1.8V | 1.842 | Volts | ok | na | na | na | na | na | na
System 1.2V | 1.107 | Volts | ok | na | na | na | na | na | na
CPU0 Diode | na | degrees C | na | na | 20.000 | 25.000 | 85.000 | 90.000 | 95.000
CPU0 Dmn 0 Temp | 24.500 | degrees C | ok | na | 0.000 | 0.000 | 97.000 | 100.000 | 100.500
CPU0 Dmn 1 Temp | 29.000 | degrees C | ok | na | 0.000 | 0.000 | 97.000 | 100.000 | 100.500
# HP ProLiant DL160
FAN1 ROTOR1 | 7680.492 | RPM | ok | na | inf | na | na | 1000.400 | na
# HP ProLiant DL360 G5
Fan Block 1 | 34.888 | unspecified | nc | na | na | 75.264 | na | na | na
Fan Block 2 | 29.792 | unspecified | nc | na | na | 75.264 | na | na | na
Fan Block 3 | 37.240 | unspecified | nc | na | na | 75.264 | na | na | na
Fan Blocks | 0.000 | unspecified | nc | na | na | 0.000 | na | na | na
Temp 1 | 40.000 | degrees C | ok | na | na | -64.000 | na | na | na
Temp 2 | 21.000 | degrees C | ok | na | na | -64.000 | na | na | na
Temp 3 | 30.000 | degrees C | ok | na | na | -64.000 | na | na | na
Temp 4 | 30.000 | degrees C | ok | na | na | -64.000 | na | na | na
Temp 5 | 28.000 | degrees C | ok | na | na | -64.000 | na | na | na
Temp 6 | na | degrees C | na | na | na | 32.000 | na | na | na
Temp 7 | na | degrees C | na | na | na | 32.000 | na | na | na
Power Meter | 214.000 | Watts | cr | na | na | 384.000 | na | na | na
Power Meter 2 | 220.000 | watts | cr | na | na | 384.000 | na | na | na
# HP ProLiant DL360 G7
DL360 G7 Temp 1 | 25.000 | degrees C | ok | na | na | na | na | 42.000 | 46.000
DL360 G7 Temp 2 | 40.000 | degrees C | ok | 5 | 10 | na | na | 82.000 | 83.000
# HP ProLiant DL360 G10
DL360 G10 02-CPU | 40.000 | degrees C | ok | na | na | na | na | 70.000 | na
DL360 G10 27-LOM | 60.000 | degrees C | ok | na | 10 | na | na | 100.000 | na
# HP ProLiant ML110 G5
CPU FAN | 1434.31 RPM | ok
SYSTEM FAN | 1497.45 RPM | ok
System 12V | 12.10 Volts | ok
System 5V | 5.08 Volts | ok
System 3.3V | 3.27 Volts | ok
CPU0 Vcore | 1.14 Volts | ok
System 1.25V | 1.25 Volts | ok
System 1.8V | 1.84 Volts | ok
System 1.2V | 1.11 Volts | ok
CPU0 Diode | disabled | ns
CPU0 Dmn 0 Temp | 23.50 degrees C | ok
CPU0 Dmn 1 Temp | 29 degrees C | ok
# HP ProLiant DL360 G5
Fan Block 1 | 34.89 unspecifi | nc
Fan Block 2 | 29.79 unspecifi | nc
Fan Block 3 | 37.24 unspecifi | nc
Fan Blocks | 0 unspecified | nc
Temp 1 | 41 degrees C | ok
Temp 2 | 19 degrees C | ok
Temp 3 | 30 degrees C | ok
Temp 4 | 30 degrees C | ok
Temp 5 | 26 degrees C | ok
Temp 6 | disabled | ns
Temp 7 | disabled | ns
Power Meter | 208 Watts | cr
Power Meter 2 | 210 watts | cr
- Fork it
- Create your feature branch (
git checkout -b my-new-feature) - Commit your changes (
git commit -am 'Added some feature') - Push to the branch (
git push origin my-new-feature) - Create new Pull Request
- Copyright (C) 2008 - 2019 Jun Futagawa (jfut)
- License
- GPLv2