Make sure you have curl, jannson and math libs installed.
sudo apt update
sudo apt install libcurl4-openssl-dev libjansson-dev libm-dev
Make sure you add weather directory to your Makefile.
The atheme.conf should look like this.
loadmodule "modules/weather/main";
weather {
/* (*)nick
* Sets the nick used for Weather and sending out informational messages.
* There is some code where nick is hardset to 'Weather' I wouldnt change unless you change that in main.c
*/
nick = "Weather";
/* (*)user
* Sets the username used for this client.
*/
user = "Weather";
/* (*)host
* The hostname used for this client,
*/
host = "services.int";
/* (*)real
* The GECOS (real name) of the client.
*/
real = "Weather Service";
};
Here is a sample of the Weather help, and outputs.
***** Weather Help *****
Weather provides weather information and related commands, using
OpenCage and PirateWeather as sources.
For more information on a command, type:
/msg Weather HELP <command>
The following commands are available:
FORECAST Fetches forecast data for a location.
HELP Displays contextual help information.
INFO Displays user-specific weather settings information.
JOIN Weather will join channel.
SETCOLORS Enables or disables weather colors output.
SETGREET Enables or disables weather greeting on identify.
SETWEATHER Sets the default weather location for the user.
WEATHER Fetches weather data for a location.
W and F shortcuts for are also available for the weather and forecast.
***** End of Help *****
<Weather> PPG Paints Arena, 1001 Fifth Avenue, Pittsburgh, PA 15219, United States of America :: Cloudy 35.1F/1.7C | Feels Like: 27.3F/-2.6C | Humidity: 85% | Wind: 7.2mph/11.5km/h WNW Gust: 18.0mph/28.9km/h | Dew: 32° | UV Index: 0.0 Risk: Low | Sunrise: 07:39 AM EST Sunset: 04:55 PM EST | Fri: Cloudy ↓27.4F/-2.6C ↑39.7F/4.3C | Sat: Partly Cloudy ↓19.7F/-6.8C ↑31.6F/-0.2C
