build(deps): bump pip from 23.2.1 to 23.3 in /drivers/gpu/drm/ci/xfails #1
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
![dependabot[bot]](https://avatars.githubusercontent.com/in/29110?s=60&v=4){kind=small}
In the diagram of the topology, $swp3 and $swp4 are described as 1Gbps ports. This is wrong information, the test does not configure such speed. Fixes: bfa8047 ("selftests: mlxsw: Add a PFC test") Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com>
'qos_pfc' test checks PFC behavior. The idea is to limit the traffic using a shaper somewhere in the flow of the packets. In this area, the buffer is smaller than the buffer at the beginning of the flow, so it fills up until there is no more space left. The test configures there PFC which is supposed to notice that the headroom is filling up and send PFC Xoff to indicate the transmitter to stop sending traffic for the priorities sharing this PG. The Xon/Xoff threshold is auto-configured and always equal to 2*(MTU rounded up to cell size). Even after sending the PFC Xoff packet, traffic will keep arriving until the transmitter receives and processes the PFC packet. This amount of traffic is known as the PFC delay allowance. Currently the buffer for the delay traffic is configured as 100KB. The MTU in the test is 10KB, therefore the threshold for Xoff is about 20KB. This allows 80KB extra to be stored in this buffer. 8-lane ports use two buffers among which the configured buffer is split, the Xoff threshold then applies to each buffer in parallel. The test does not take into account the behavior of 8-lane ports, when the ports are configured to 400Gbps with 8 lanes or 800Gbps with 8 lanes, packets are dropped and the test fails. Check if the relevant ports use 8 lanes, in such case double the size of the buffer, as the headroom is split half-half. Fixes: bfa8047 ("selftests: mlxsw: Add a PFC test") Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com>
The flags are not used outside of the C file so move them there. Suggested-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Device drivers register with devlink from their probe routines (under
the device lock) by acquiring the devlink instance lock and calling
devl_register().
Drivers that support a devlink reload usually implement the
reload_{down, up}() operations in a similar fashion to their remove and
probe routines, respectively.
However, while the remove and probe routines are invoked with the device
lock held, the reload operations are only invoked with the devlink
instance lock held. It is therefore impossible for drivers to acquire
the device lock from their reload operations, as this would result in
lock inversion.
The motivating use case for invoking the reload operations with the
device lock held is in mlxsw which needs to trigger a PCI reset as part
of the reload. The driver cannot call pci_reset_function() as this
function acquires the device lock. Instead, it needs to call
__pci_reset_function_locked which expects the device lock to be held.
To that end, adjust devlink to always acquire the device lock before the
devlink instance lock when performing a reload.
For now, only do that when reload is triggered as part of netns
dismantle. Subsequent patches will handle the case where reload is
explicitly triggered by user space.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Currently, private flags (e.g., 'DEVLINK_NL_FLAG_NEED_PORT') are only used in pre_doit operations, but a subsequent patch will need to conditionally lock and unlock the device lock in pre and post doit operations, respectively. As a preparation, enable the use of private flags in post_doit operations in a similar fashion to how it is done for pre_doit operations. No functional changes intended. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Introduce a new private flag ('DEVLINK_NL_FLAG_NEED_DEV_LOCK') to allow
netlink commands to specify that they need to acquire the device lock in
their pre_doit operation and release it in their post_doit operation.
The reload command will use this flag in the subsequent patch.
No functional changes intended.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Device drivers register with devlink from their probe routines (under
the device lock) by acquiring the devlink instance lock and calling
devl_register().
Drivers that support a devlink reload usually implement the
reload_{down, up}() operations in a similar fashion to their remove and
probe routines, respectively.
However, while the remove and probe routines are invoked with the device
lock held, the reload operations are only invoked with the devlink
instance lock held. It is therefore impossible for drivers to acquire
the device lock from their reload operations, as this would result in
lock inversion.
The motivating use case for invoking the reload operations with the
device lock held is in mlxsw which needs to trigger a PCI reset as part
of the reload. The driver cannot call pci_reset_function() as this
function acquires the device lock. Instead, it needs to call
__pci_reset_function_locked which expects the device lock to be held.
To that end, adjust devlink to always acquire the device lock before the
devlink instance lock when performing a reload.
Do that when reload is explicitly triggered by user space by specifying
the 'DEVLINK_NL_FLAG_NEED_DEV_LOCK' flag in the pre_doit and post_doit
operations of the reload command.
A previous patch already handled the case where reload is invoked as
part of netns dismantle.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Add an assert to verify that the device lock is always held throughout reload operations. Tested the following flows with netdevsim and mlxsw while lockdep is enabled: netdevsim: # echo "10 1" > /sys/bus/netdevsim/new_device # devlink dev reload netdevsim/netdevsim10 # ip netns add bla # devlink dev reload netdevsim/netdevsim10 netns bla # ip netns del bla # echo 10 > /sys/bus/netdevsim/del_device mlxsw: # devlink dev reload pci/0000:01:00.0 # ip netns add bla # devlink dev reload pci/0000:01:00.0 netns bla # ip netns del bla # echo 1 > /sys/bus/pci/devices/0000\:01\:00.0/remove # echo 1 > /sys/bus/pci/rescan Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Spectrum-{1,2,3,4} devices report that a D3hot->D0 transition causes a
reset (i.e., they advertise NoSoftRst-). However, this transition does
not have any effect on the device: It continues to be operational and
network ports remain up. Advertising this support makes it seem as if a
PM reset is viable for these devices. Mark it as unavailable to skip it
when testing reset methods.
Before:
# cat /sys/bus/pci/devices/0000\:03\:00.0/reset_method
pm bus
After:
# cat /sys/bus/pci/devices/0000\:03\:00.0/reset_method
bus
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Currently, the time it took a PCI device to become ready after reset is
only printed if it was longer than 1000ms ('PCI_RESET_WAIT'). However,
for debugging purposes it is useful to know this time even if it was
shorter. For example, with the device I am working on, hardware
engineers asked to verify that it becomes ready on the first try (no
delay).
To that end, add a debug level print that can be enabled using dynamic
debug. Example:
# echo 1 > /sys/bus/pci/devices/0000\:01\:00.0/reset
# dmesg -c | grep ready
# echo "file drivers/pci/pci.c +p" > /sys/kernel/debug/dynamic_debug/control
# echo 1 > /sys/bus/pci/devices/0000\:01\:00.0/reset
# dmesg -c | grep ready
[ 396.060335] mlxsw_spectrum4 0000:01:00.0: ready 0ms after bus reset
# echo "file drivers/pci/pci.c -p" > /sys/kernel/debug/dynamic_debug/control
# echo 1 > /sys/bus/pci/devices/0000\:01\:00.0/reset
# dmesg -c | grep ready
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Currently mlxsw_reg_mrsr_pack() always sets 'command=1'. As preparation for support of new reset flow, pass the command as an argument to the function and add an enum for this field. For now, always pass 'command=1' to the pack() function. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com>
In the next patches, mlxsw_pci_sw_reset() will be extended to support more reset types and will not necessarily issue a software reset. Rename the function to reflect that. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com>
In general, the existing flow of software reset in the driver is: 1. Wait for system ready status. 2. Send MRSR command, to start the reset. 3. Wait for system ready status. This flow will be extended once a new reset command is supported. As a preparation, move step #2 to a separate function. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com>
The driver resets the device during probe and during a devlink reload. The current reset method reloads the current firmware version or a pending one, if one was previously flashed using devlink. However, the current reset method does not result in a PCI hot reset, preventing the PCI firmware from being upgraded, unless the system is rebooted. To solve this problem, a new reset command (6) was implemented in the firmware. Unlike the current command (1), after issuing the new command the device will not start the reset immediately, but only after a PCI hot reset. Implement the new reset method by first verifying that it is supported by the current firmware version by querying the Management Capabilities Mask (MCAM) register. If supported, issue the new reset command (6) via MRSR register followed by a PCI reset by calling __pci_reset_function_locked(). Once the PCI firmware is operational, go back to the regular reset flow and wait for the entire device to become ready. That is, repeatedly read the "system_status" register from the BAR until a value of "FW_READY" (0x5E) appears. Tested: # for i in $(seq 1 10); do devlink dev reload pci/0000:01:00.0; done Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com>
Implement reset_prepare() and reset_done() handlers that are invoked by
the PCI core before and after issuing a PCI reset, respectively.
Specifically, implement reset_prepare() by calling
mlxsw_core_bus_device_unregister() and reset_done() by calling
mlxsw_core_bus_device_register(). This is the same implementation as the
reload_{down,up}() devlink operations with the following differences:
1. The devlink instance is unregistered and then registered again after
the reset.
2. A reset via the device's command interface (using MRSR register) is
not issued during reset_done() as PCI core already issued a PCI
reset.
Tested:
# for i in $(seq 1 10); do echo 1 > /sys/bus/pci/devices/0000\:01\:00.0/reset; done
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Test that PCI reset works correctly by verifying that only the expected reset methods are supported and that after issuing the reset the ifindex of the port changes. Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Petr Machata <petrm@nvidia.com>
According to Documentation/networking/operstates.rst, the administrative
and operational state of an interface can be determined via both the
'ifi_flags' field in the ancillary header of a RTM_NEWLINK message and
the 'IFLA_OPERSTATE' attribute in the message.
When a driver signals loss of carrier via netif_carrier_off(), the
change is reflected immediately in the 'ifi_flags' field, but not in the
'IFLA_OPERSTATE' attribute. This is because changes in 'IFLA_OPERSTATE'
are performed in a link watch delayed work. From the document:
"Whenever the driver CHANGES one of these flags, a workqueue event is
scheduled to translate the flag combination to IFLA_OPERSTATE as
follows"
This means that it is possible for user space that is constantly
querying the kernel for interface state to see the output below when the
following commands are run. Their purpose is to simulate tearing down of
a selftest and start of a new one.
Commands:
# ip link set dev veth1 down
# ip link set dev veth0 down
# ip link set dev veth0 up
# ip link set dev veth1 up
Output:
11: veth0@veth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
noqueue state UP mode DEFAULT group default qlen 1000
link/ether 06:49:03:9b:96:12 brd ff:ff:ff:ff:ff:ff
11: veth0@veth1: <BROADCAST,MULTICAST,UP,M-DOWN> mtu 1500 qdisc noqueue
state UP mode DEFAULT group default qlen 1000
link/ether 06:49:03:9b:96:12 brd ff:ff:ff:ff:ff:ff
11: veth0@veth1: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noqueue
state DOWN mode DEFAULT group default qlen 1000
link/ether 06:49:03:9b:96:12 brd ff:ff:ff:ff:ff:ff
11: veth0@veth1: <BROADCAST,MULTICAST,UP,M-DOWN> mtu 1500 qdisc noqueue
state UP mode DEFAULT group default qlen 1000
link/ether 06:49:03:9b:96:12 brd ff:ff:ff:ff:ff:ff
11: veth0@veth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc
noqueue state UP mode DEFAULT group default qlen 1000
link/ether 06:49:03:9b:96:12 brd ff:ff:ff:ff:ff:ff
In the third line, the operational state is set by rtnl_fill_ifinfo() to
'IF_OPER_DOWN' because the interface is administratively down, but
'dev->operstate' is still 'IF_OPER_UP' as the delayed work has yet to
run. That is why the interface's operational state is reported as
'IF_OPER_UP' in the next line after it was put administratively up
again.
The output in the fourth line would make user space believe that the
interface is fully operational if only the 'IFLA_OPERSTATE' attribute is
considered. This is false as the interface does not have a carrier
('LOWER_UP' is not set) at this stage.
Solve this by determining if an interface is operational solely based on
the presence of the 'IFF_UP' and 'IFF_LOWER_UP' bits in the 'ifi_flags'
field.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Extend MFGD (Monitoring FW General Debug Register) with a new field, en_debug_assert that enables INTR severity for fatal events sent by MFDE. In addition, add a fw_fatal_event_mode for enabling MFDE trap and stopping FW. Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com>
INTERNAL severity is unexpected state without systemic failure. Enable INTERNAL asserts in MFGD register to be used for better coverage. Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com>
MFGD.fw_fatal_event_mode has a new mode for enabling MFDE trap and stopping FW on assert. Use that event mode in testing mode in order to create a more accurate dump. Suggested-by: Miryam Levy <miryaml@nvidia.com> > I requested it to be 2 and I don’t see a reason why it should be changed, for > tests environment it is always 2, also for SDK verification. Signed-off-by: Danielle Ratson <danieller@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Bumps [pip](https://github.com/pypa/pip) from 23.2.1 to 23.3. - [Changelog](https://github.com/pypa/pip/blob/main/NEWS.rst) - [Commits](pypa/pip@23.2.1...23.3) --- updated-dependencies: - dependency-name: pip dependency-type: direct:production ... Signed-off-by: dependabot[bot] <support@github.com>
pmachata
force-pushed
the
combined_queue
branch
7 times, most recently
from
63e7849 to
f6fee35
Compare
pmachata
force-pushed
the
combined_queue
branch
from
f6fee35 to
598db5e
Compare
pmachata
pushed a commit
that referenced
this pull request
Jan 10, 2025
Using the 'net' structure via 'current' is not recommended for different reasons. First, if the goal is to use it to read or write per-netns data, this is inconsistent with how the "generic" sysctl entries are doing: directly by only using pointers set to the table entry, e.g. table->data. Linked to that, the per-netns data should always be obtained from the table linked to the netns it had been created for, which may not coincide with the reader's or writer's netns. Another reason is that access to current->nsproxy->netns can oops if attempted when current->nsproxy had been dropped when the current task is exiting. This is what syzbot found, when using acct(2): Oops: general protection fault, probably for non-canonical address 0xdffffc0000000005: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000028-0x000000000000002f] CPU: 1 UID: 0 PID: 5924 Comm: syz-executor Not tainted 6.13.0-rc5-syzkaller-00004-gccb98ccef0e5 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 RIP: 0010:proc_scheduler+0xc6/0x3c0 net/mptcp/ctrl.c:125 Code: 03 42 80 3c 38 00 0f 85 fe 02 00 00 4d 8b a4 24 08 09 00 00 48 b8 00 00 00 00 00 fc ff df 49 8d 7c 24 28 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 cc 02 00 00 4d 8b 7c 24 28 48 8d 84 24 c8 00 00 RSP: 0018:ffffc900034774e8 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 1ffff9200068ee9e RCX: ffffc90003477620 RDX: 0000000000000005 RSI: ffffffff8b08f91e RDI: 0000000000000028 RBP: 0000000000000001 R08: ffffc90003477710 R09: 0000000000000040 R10: 0000000000000040 R11: 00000000726f7475 R12: 0000000000000000 R13: ffffc90003477620 R14: ffffc90003477710 R15: dffffc0000000000 FS: 0000000000000000(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fee3cd452d8 CR3: 000000007d116000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> proc_sys_call_handler+0x403/0x5d0 fs/proc/proc_sysctl.c:601 __kernel_write_iter+0x318/0xa80 fs/read_write.c:612 __kernel_write+0xf6/0x140 fs/read_write.c:632 do_acct_process+0xcb0/0x14a0 kernel/acct.c:539 acct_pin_kill+0x2d/0x100 kernel/acct.c:192 pin_kill+0x194/0x7c0 fs/fs_pin.c:44 mnt_pin_kill+0x61/0x1e0 fs/fs_pin.c:81 cleanup_mnt+0x3ac/0x450 fs/namespace.c:1366 task_work_run+0x14e/0x250 kernel/task_work.c:239 exit_task_work include/linux/task_work.h:43 [inline] do_exit+0xad8/0x2d70 kernel/exit.c:938 do_group_exit+0xd3/0x2a0 kernel/exit.c:1087 get_signal+0x2576/0x2610 kernel/signal.c:3017 arch_do_signal_or_restart+0x90/0x7e0 arch/x86/kernel/signal.c:337 exit_to_user_mode_loop kernel/entry/common.c:111 [inline] exit_to_user_mode_prepare include/linux/entry-common.h:329 [inline] __syscall_exit_to_user_mode_work kernel/entry/common.c:207 [inline] syscall_exit_to_user_mode+0x150/0x2a0 kernel/entry/common.c:218 do_syscall_64+0xda/0x250 arch/x86/entry/common.c:89 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7fee3cb87a6a Code: Unable to access opcode bytes at 0x7fee3cb87a40. RSP: 002b:00007fffcccac688 EFLAGS: 00000202 ORIG_RAX: 0000000000000037 RAX: 0000000000000000 RBX: 00007fffcccac710 RCX: 00007fee3cb87a6a RDX: 0000000000000041 RSI: 0000000000000000 RDI: 0000000000000003 RBP: 0000000000000003 R08: 00007fffcccac6ac R09: 00007fffcccacac7 R10: 00007fffcccac710 R11: 0000000000000202 R12: 00007fee3cd49500 R13: 00007fffcccac6ac R14: 0000000000000000 R15: 00007fee3cd4b000 </TASK> Modules linked in: ---[ end trace 0000000000000000 ]--- RIP: 0010:proc_scheduler+0xc6/0x3c0 net/mptcp/ctrl.c:125 Code: 03 42 80 3c 38 00 0f 85 fe 02 00 00 4d 8b a4 24 08 09 00 00 48 b8 00 00 00 00 00 fc ff df 49 8d 7c 24 28 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 cc 02 00 00 4d 8b 7c 24 28 48 8d 84 24 c8 00 00 RSP: 0018:ffffc900034774e8 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 1ffff9200068ee9e RCX: ffffc90003477620 RDX: 0000000000000005 RSI: ffffffff8b08f91e RDI: 0000000000000028 RBP: 0000000000000001 R08: ffffc90003477710 R09: 0000000000000040 R10: 0000000000000040 R11: 00000000726f7475 R12: 0000000000000000 R13: ffffc90003477620 R14: ffffc90003477710 R15: dffffc0000000000 FS: 0000000000000000(0000) GS:ffff8880b8700000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fee3cd452d8 CR3: 000000007d116000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 ---------------- Code disassembly (best guess), 1 bytes skipped: 0: 42 80 3c 38 00 cmpb $0x0,(%rax,%r15,1) 5: 0f 85 fe 02 00 00 jne 0x309 b: 4d 8b a4 24 08 09 00 mov 0x908(%r12),%r12 12: 00 13: 48 b8 00 00 00 00 00 movabs $0xdffffc0000000000,%rax 1a: fc ff df 1d: 49 8d 7c 24 28 lea 0x28(%r12),%rdi 22: 48 89 fa mov %rdi,%rdx 25: 48 c1 ea 03 shr $0x3,%rdx * 29: 80 3c 02 00 cmpb $0x0,(%rdx,%rax,1) <-- trapping instruction 2d: 0f 85 cc 02 00 00 jne 0x2ff 33: 4d 8b 7c 24 28 mov 0x28(%r12),%r15 38: 48 rex.W 39: 8d .byte 0x8d 3a: 84 24 c8 test %ah,(%rax,%rcx,8) Here with 'net.mptcp.scheduler', the 'net' structure is not really needed, because the table->data already has a pointer to the current scheduler, the only thing needed from the per-netns data. Simply use 'data', instead of getting (most of the time) the same thing, but from a longer and indirect way. Fixes: 6963c50 ("mptcp: only allow set existing scheduler for net.mptcp.scheduler") Cc: stable@vger.kernel.org Reported-by: syzbot+e364f774c6f57f2c86d1@syzkaller.appspotmail.com Closes: https://lore.kernel.org/67769ecb.050a0220.3a8527.003f.GAE@google.com Suggested-by: Al Viro <viro@zeniv.linux.org.uk> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20250108-net-sysctl-current-nsproxy-v1-2-5df34b2083e8@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pmachata
pushed a commit
that referenced
this pull request
Jan 13, 2025
A next patch will add support for transmitting XDP frames. There is a limitation to call XDP APIs when budget is zero. In Rx flow, we just skip processing for all packets. For Tx completion, driver should free the SKBs, but can not handle XDP completions. To be able to separate such handling, dedicate SDQ #1 for XDP frames. The driver already dedicates SDQ #0 for EMADs. The appropriate CQ is also dedicated for XDP, as it is dedicated for specific SDQ. Add an enum for SDQ reserved indexes, instead of MLXSW_PCI_SDQ_EMAD_INDEX macro. Derive minimum required SDQs from the new enum. Adjust the exiting code to use the enum and to take into account the reserved SDQ for XDP. Next patches will use this queue. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com>
pmachata
force-pushed
the
combined_queue
branch
2 times, most recently
from
b8ec0c6 to
110a527
Compare
pmachata
pushed a commit
that referenced
this pull request
Jan 14, 2025
A next patch will add support for transmitting XDP frames. There is a limitation to call XDP APIs when budget is zero. In Rx flow, we just skip processing for all packets. For Tx completion, driver should free the SKBs, but can not handle XDP completions. To be able to separate such handling, dedicate SDQ #1 for XDP frames. The driver already dedicates SDQ #0 for EMADs. The appropriate CQ is also dedicated for XDP, as it is dedicated for specific SDQ. Add an enum for SDQ reserved indexes, instead of MLXSW_PCI_SDQ_EMAD_INDEX macro. Derive minimum required SDQs from the new enum. Adjust the exiting code to use the enum and to take into account the reserved SDQ for XDP. Next patches will use this queue. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com>
pmachata
force-pushed
the
combined_queue
branch
2 times, most recently
from
c0c298a to
d886851
Compare
pmachata
pushed a commit
that referenced
this pull request
Jan 15, 2025
A next patch will add support for transmitting XDP frames. There is a limitation to call XDP APIs when budget is zero. In Rx flow, we just skip processing for all packets. For Tx completion, driver should free the SKBs, but can not handle XDP completions. To be able to separate such handling, dedicate SDQ #1 for XDP frames. The driver already dedicates SDQ #0 for EMADs. The appropriate CQ is also dedicated for XDP, as it is dedicated for specific SDQ. Add an enum for SDQ reserved indexes, instead of MLXSW_PCI_SDQ_EMAD_INDEX macro. Derive minimum required SDQs from the new enum. Adjust the exiting code to use the enum and to take into account the reserved SDQ for XDP. Next patches will use this queue. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com>
pmachata
force-pushed
the
combined_queue
branch
2 times, most recently
from
8785080 to
99e4040
Compare
pmachata
pushed a commit
that referenced
this pull request
Jan 16, 2025
Daniel Machon says:
====================
net: lan969x: add FDMA support
== Description:
This series is the last of a multi-part series, that prepares and adds
support for the new lan969x switch driver.
The upstreaming efforts has been split into multiple series:
1) Prepare the Sparx5 driver for lan969x (merged)
2) Add support for lan969x (same basic features as Sparx5
provides excl. FDMA and VCAP, merged).
3) Add lan969x VCAP functionality (merged).
4) Add RGMII support (merged).
--> 5) Add FDMA support.
== FDMA support:
The lan969x switch device uses the same FDMA engine as the Sparx5 switch
device, with the same number of channels etc. This means we can utilize
the newly added FDMA library, that is already in use by the lan966x and
sparx5 drivers.
As previous lan969x series, the FDMA implementation will hook into the
Sparx5 implementation where possible, however both RX and TX handling
will be done differently on lan969x and therefore requires a separate
implementation of the RX and TX path.
Details are in the commit description of the individual patches
== Patch breakdown:
Patch #1: Enable FDMA support on lan969x
Patch #2: Split start()/stop() functions
Patch #3: Activate TX FDMA in start()
Patch #4: Ops out a few functions that differ on the two platforms
Patch #5: Add FDMA implementation for lan969x
v1: https://lore.kernel.org/20250109-sparx5-lan969x-switch-driver-5-v1-0-13d6d8451e63@microchip.com
====================
Link: https://patch.msgid.link/20250113-sparx5-lan969x-switch-driver-5-v2-0-c468f02fd623@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pmachata
pushed a commit
that referenced
this pull request
Jan 16, 2025
A next patch will add support for transmitting XDP frames. There is a limitation to call XDP APIs when budget is zero. In Rx flow, we just skip processing for all packets. For Tx completion, driver should free the SKBs, but can not handle XDP completions. To be able to separate such handling, dedicate SDQ #1 for XDP frames. The driver already dedicates SDQ #0 for EMADs. The appropriate CQ is also dedicated for XDP, as it is dedicated for specific SDQ. Add an enum for SDQ reserved indexes, instead of MLXSW_PCI_SDQ_EMAD_INDEX macro. Derive minimum required SDQs from the new enum. Adjust the exiting code to use the enum and to take into account the reserved SDQ for XDP. Next patches will use this queue. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com>
pmachata
force-pushed
the
combined_queue
branch
from
99e4040 to
afb23a1
Compare
pmachata
pushed a commit
that referenced
this pull request
Jan 17, 2025
…e flex array The following UBSAN error is reported during boot on the db410c board on a clang-19 build: Internal error: UBSAN: array index out of bounds: 00000000f2005512 [#1] PREEMPT SMP ... pc : qnoc_probe+0x5f8/0x5fc ... The cause of the error is that the counter member was not set before accessing the annotated flexible array member, but after that. Fix this by initializing it earlier. Reported-by: Linux Kernel Functional Testing <lkft@linaro.org> Closes: https://lore.kernel.org/r/CA+G9fYs+2mBz1y2dAzxkj9-oiBJ2Acm1Sf1h2YQ3VmBqj_VX2g@mail.gmail.com Fixes: dd4904f ("interconnect: qcom: Annotate struct icc_onecell_data with __counted_by") Reviewed-by: Nathan Chancellor <nathan@kernel.org> Link: https://lore.kernel.org/r/20241203223334.233404-1-djakov@kernel.org Signed-off-by: Georgi Djakov <djakov@kernel.org>
pmachata
pushed a commit
that referenced
this pull request
Jan 17, 2025
The tcpci_irq() may meet below NULL pointer dereference issue: [ 2.641851] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000010 [ 2.641951] status 0x1, 0x37f [ 2.650659] Mem abort info: [ 2.656490] ESR = 0x0000000096000004 [ 2.660230] EC = 0x25: DABT (current EL), IL = 32 bits [ 2.665532] SET = 0, FnV = 0 [ 2.668579] EA = 0, S1PTW = 0 [ 2.671715] FSC = 0x04: level 0 translation fault [ 2.676584] Data abort info: [ 2.679459] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000 [ 2.684936] CM = 0, WnR = 0, TnD = 0, TagAccess = 0 [ 2.689980] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0 [ 2.695284] [0000000000000010] user address but active_mm is swapper [ 2.701632] Internal error: Oops: 0000000096000004 [#1] PREEMPT SMP [ 2.707883] Modules linked in: [ 2.710936] CPU: 1 UID: 0 PID: 87 Comm: irq/111-2-0051 Not tainted 6.12.0-rc6-06316-g7f63786ad3d1-dirty #4 [ 2.720570] Hardware name: NXP i.MX93 11X11 EVK board (DT) [ 2.726040] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 2.732989] pc : tcpci_irq+0x38/0x318 [ 2.736647] lr : _tcpci_irq+0x14/0x20 [ 2.740295] sp : ffff80008324bd30 [ 2.743597] x29: ffff80008324bd70 x28: ffff800080107894 x27: ffff800082198f70 [ 2.750721] x26: ffff0000050e6680 x25: ffff000004d172ac x24: ffff0000050f0000 [ 2.757845] x23: ffff000004d17200 x22: 0000000000000001 x21: ffff0000050f0000 [ 2.764969] x20: ffff000004d17200 x19: 0000000000000000 x18: 0000000000000001 [ 2.772093] x17: 0000000000000000 x16: ffff80008183d8a0 x15: ffff00007fbab040 [ 2.779217] x14: ffff00007fb918c0 x13: 0000000000000000 x12: 000000000000017a [ 2.786341] x11: 0000000000000001 x10: 0000000000000a90 x9 : ffff80008324bd00 [ 2.793465] x8 : ffff0000050f0af0 x7 : ffff00007fbaa840 x6 : 0000000000000031 [ 2.800589] x5 : 000000000000017a x4 : 0000000000000002 x3 : 0000000000000002 [ 2.807713] x2 : ffff80008324bd3a x1 : 0000000000000010 x0 : 0000000000000000 [ 2.814838] Call trace: [ 2.817273] tcpci_irq+0x38/0x318 [ 2.820583] _tcpci_irq+0x14/0x20 [ 2.823885] irq_thread_fn+0x2c/0xa8 [ 2.827456] irq_thread+0x16c/0x2f4 [ 2.830940] kthread+0x110/0x114 [ 2.834164] ret_from_fork+0x10/0x20 [ 2.837738] Code: f9426420 f9001fe0 d2800000 52800201 (f9400a60) This may happen on shared irq case. Such as two Type-C ports share one irq. After the first port finished tcpci_register_port(), it may trigger interrupt. However, if the interrupt comes by chance the 2nd port finishes devm_request_threaded_irq(), the 2nd port interrupt handler will run at first. Then the above issue happens due to tcpci is still a NULL pointer in tcpci_irq() when dereference to regmap. devm_request_threaded_irq() <-- port1 irq comes disable_irq(client->irq); tcpci_register_port() This will restore the logic to the state before commit (77e8510 "usb: typec: tcpci: support edge irq"). However, moving tcpci_register_port() earlier creates a problem when use edge irq because tcpci_init() will be called before devm_request_threaded_irq(). The tcpci_init() writes the ALERT_MASK to the hardware to tell it to start generating interrupts but we're not ready to deal with them yet, then the ALERT events may be missed and ALERT line will not recover to high level forever. To avoid the issue, this will also set ALERT_MASK register after devm_request_threaded_irq() return. Fixes: 77e8510 ("usb: typec: tcpci: support edge irq") Cc: stable <stable@kernel.org> Tested-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com> Signed-off-by: Xu Yang <xu.yang_2@nxp.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org> Link: https://lore.kernel.org/r/20241218095328.2604607-1-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pmachata
pushed a commit
that referenced
this pull request
Jan 17, 2025
This reverts commit fd620fc. Boot failures reported by KernelCI: [ 4.395400] mediatek-drm mediatek-drm.5.auto: bound 1c014000.merge (ops 0xffffd35fd12975f8) [ 4.396155] mediatek-drm mediatek-drm.5.auto: bound 1c000000.ovl (ops 0xffffd35fd12977b8) [ 4.411951] mediatek-drm mediatek-drm.5.auto: bound 1c002000.rdma (ops 0xffffd35fd12989c0) [ 4.536837] mediatek-drm mediatek-drm.5.auto: bound 1c004000.ccorr (ops 0xffffd35fd1296cf0) [ 4.545181] mediatek-drm mediatek-drm.5.auto: bound 1c005000.aal (ops 0xffffd35fd1296a80) [ 4.553344] mediatek-drm mediatek-drm.5.auto: bound 1c006000.gamma (ops 0xffffd35fd12972b0) [ 4.561680] mediatek-drm mediatek-drm.5.auto: bound 1c014000.merge (ops 0xffffd35fd12975f8) [ 4.570025] ------------[ cut here ]------------ [ 4.574630] refcount_t: underflow; use-after-free. [ 4.579416] WARNING: CPU: 6 PID: 81 at lib/refcount.c:28 refcount_warn_saturate+0xf4/0x148 [ 4.587670] Modules linked in: [ 4.590714] CPU: 6 UID: 0 PID: 81 Comm: kworker/u32:3 Tainted: G W 6.12.0 #1 cab58e2e59020ebd4be8ada89a65f465a316c742 [ 4.602695] Tainted: [W]=WARN [ 4.605649] Hardware name: Acer Tomato (rev2) board (DT) [ 4.610947] Workqueue: events_unbound deferred_probe_work_func [ 4.616768] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 4.623715] pc : refcount_warn_saturate+0xf4/0x148 [ 4.628493] lr : refcount_warn_saturate+0xf4/0x148 [ 4.633270] sp : ffff8000807639c0 [ 4.636571] x29: ffff8000807639c0 x28: ffff34ff4116c640 x27: ffff34ff4368e080 [ 4.643693] x26: ffffd35fd1299ac8 x25: ffff34ff46c8c410 x24: 0000000000000000 [ 4.650814] x23: ffff34ff4368e080 x22: 00000000fffffdfb x21: 0000000000000002 [ 4.657934] x20: ffff34ff470c6000 x19: ffff34ff410c7c10 x18: 0000000000000006 [ 4.665055] x17: 666678302073706f x16: 2820656772656d2e x15: ffff800080763440 [ 4.672176] x14: 0000000000000000 x13: 2e656572662d7265 x12: ffffd35fd2ed14f0 [ 4.679297] x11: 0000000000000001 x10: 0000000000000001 x9 : ffffd35fd0342150 [ 4.686418] x8 : c0000000ffffdfff x7 : ffffd35fd2e21450 x6 : 00000000000affa8 [ 4.693539] x5 : ffffd35fd2ed1498 x4 : 0000000000000000 x3 : 0000000000000000 [ 4.700660] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff34ff40932580 [ 4.707781] Call trace: [ 4.710216] refcount_warn_saturate+0xf4/0x148 (P) [ 4.714993] refcount_warn_saturate+0xf4/0x148 (L) [ 4.719772] kobject_put+0x110/0x118 [ 4.723335] put_device+0x1c/0x38 [ 4.726638] mtk_drm_bind+0x294/0x5c0 [ 4.730289] try_to_bring_up_aggregate_device+0x16c/0x1e0 [ 4.735673] __component_add+0xbc/0x1c0 [ 4.739495] component_add+0x1c/0x30 [ 4.743058] mtk_disp_rdma_probe+0x140/0x210 [ 4.747314] platform_probe+0x70/0xd0 [ 4.750964] really_probe+0xc4/0x2a8 [ 4.754527] __driver_probe_device+0x80/0x140 [ 4.758870] driver_probe_device+0x44/0x120 [ 4.763040] __device_attach_driver+0xc0/0x108 [ 4.767470] bus_for_each_drv+0x8c/0xf0 [ 4.771294] __device_attach+0xa4/0x198 [ 4.775117] device_initial_probe+0x1c/0x30 [ 4.779286] bus_probe_device+0xb4/0xc0 [ 4.783109] deferred_probe_work_func+0xb0/0x100 [ 4.787714] process_one_work+0x18c/0x420 [ 4.791712] worker_thread+0x30c/0x418 [ 4.795449] kthread+0x128/0x138 [ 4.798665] ret_from_fork+0x10/0x20 [ 4.802229] ---[ end trace 0000000000000000 ]--- Fixes: fd620fc ("drm/mediatek: Switch to for_each_child_of_node_scoped()") Cc: stable@vger.kernel.org Cc: Javier Carrasco <javier.carrasco.cruz@gmail.com> Reported-by: Sasha Levin <sashal@kernel.org> Closes: https://lore.kernel.org/lkml/Z0lNHdwQ3rODHQ2c@sashalap/T/#mfaa6343cfd4d59aae5912b095c0693c0553e746c Link: https://patchwork.kernel.org/project/dri-devel/patch/20241223151218.7958-1-chunkuang.hu@kernel.org/ Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
pmachata
pushed a commit
that referenced
this pull request
Jan 17, 2025
DC driver is using two different values to define the maximum number of surfaces: MAX_SURFACES and MAX_SURFACE_NUM. Consolidate MAX_SURFACES as the unique definition for surface updates across DC. It fixes page fault faced by Cosmic users on AMD display versions that support two overlay planes, since the introduction of cursor overlay mode. [Nov26 21:33] BUG: unable to handle page fault for address: 0000000051d0f08b [ +0.000015] #PF: supervisor read access in kernel mode [ +0.000006] #PF: error_code(0x0000) - not-present page [ +0.000005] PGD 0 P4D 0 [ +0.000007] Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI [ +0.000006] CPU: 4 PID: 71 Comm: kworker/u32:6 Not tainted 6.10.0+ #300 [ +0.000006] Hardware name: Valve Jupiter/Jupiter, BIOS F7A0131 01/30/2024 [ +0.000007] Workqueue: events_unbound commit_work [drm_kms_helper] [ +0.000040] RIP: 0010:copy_stream_update_to_stream.isra.0+0x30d/0x750 [amdgpu] [ +0.000847] Code: 8b 10 49 89 94 24 f8 00 00 00 48 8b 50 08 49 89 94 24 00 01 00 00 8b 40 10 41 89 84 24 08 01 00 00 49 8b 45 78 48 85 c0 74 0b <0f> b6 00 41 88 84 24 90 64 00 00 49 8b 45 60 48 85 c0 74 3b 48 8b [ +0.000010] RSP: 0018:ffffc203802f79a0 EFLAGS: 00010206 [ +0.000009] RAX: 0000000051d0f08b RBX: 0000000000000004 RCX: ffff9f964f0a8070 [ +0.000004] RDX: ffff9f9710f90e40 RSI: ffff9f96600c8000 RDI: ffff9f964f000000 [ +0.000004] RBP: ffffc203802f79f8 R08: 0000000000000000 R09: 0000000000000000 [ +0.000005] R10: 0000000000000000 R11: 0000000000000000 R12: ffff9f96600c8000 [ +0.000004] R13: ffff9f9710f90e40 R14: ffff9f964f000000 R15: ffff9f96600c8000 [ +0.000004] FS: 0000000000000000(0000) GS:ffff9f9970000000(0000) knlGS:0000000000000000 [ +0.000005] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000005] CR2: 0000000051d0f08b CR3: 00000002e6a20000 CR4: 0000000000350ef0 [ +0.000005] Call Trace: [ +0.000011] <TASK> [ +0.000010] ? __die_body.cold+0x19/0x27 [ +0.000012] ? page_fault_oops+0x15a/0x2d0 [ +0.000014] ? exc_page_fault+0x7e/0x180 [ +0.000009] ? asm_exc_page_fault+0x26/0x30 [ +0.000013] ? copy_stream_update_to_stream.isra.0+0x30d/0x750 [amdgpu] [ +0.000739] ? dc_commit_state_no_check+0xd6c/0xe70 [amdgpu] [ +0.000470] update_planes_and_stream_state+0x49b/0x4f0 [amdgpu] [ +0.000450] ? srso_return_thunk+0x5/0x5f [ +0.000009] ? commit_minimal_transition_state+0x239/0x3d0 [amdgpu] [ +0.000446] update_planes_and_stream_v2+0x24a/0x590 [amdgpu] [ +0.000464] ? srso_return_thunk+0x5/0x5f [ +0.000009] ? sort+0x31/0x50 [ +0.000007] ? amdgpu_dm_atomic_commit_tail+0x159f/0x3a30 [amdgpu] [ +0.000508] ? srso_return_thunk+0x5/0x5f [ +0.000009] ? amdgpu_crtc_get_scanout_position+0x28/0x40 [amdgpu] [ +0.000377] ? srso_return_thunk+0x5/0x5f [ +0.000009] ? drm_crtc_vblank_helper_get_vblank_timestamp_internal+0x160/0x390 [drm] [ +0.000058] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? dma_fence_default_wait+0x8c/0x260 [ +0.000010] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? wait_for_completion_timeout+0x13b/0x170 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? dma_fence_wait_timeout+0x108/0x140 [ +0.000010] ? commit_tail+0x94/0x130 [drm_kms_helper] [ +0.000024] ? process_one_work+0x177/0x330 [ +0.000008] ? worker_thread+0x266/0x3a0 [ +0.000006] ? __pfx_worker_thread+0x10/0x10 [ +0.000004] ? kthread+0xd2/0x100 [ +0.000006] ? __pfx_kthread+0x10/0x10 [ +0.000006] ? ret_from_fork+0x34/0x50 [ +0.000004] ? __pfx_kthread+0x10/0x10 [ +0.000005] ? ret_from_fork_asm+0x1a/0x30 [ +0.000011] </TASK> Fixes: 1b04dcc ("drm/amd/display: Introduce overlay cursor mode") Suggested-by: Leo Li <sunpeng.li@amd.com> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3693 Signed-off-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 1c86c81a86c60f9b15d3e3f43af0363cf56063e7) Cc: stable@vger.kernel.org
pmachata
force-pushed
the
combined_queue
branch
from
afb23a1 to
70c1013
Compare
pmachata
pushed a commit
that referenced
this pull request
Jan 17, 2025
dm_get_plane_scale doesn't take into account plane scaled size equal to zero, leading to a kernel oops due to division by zero. Fix by setting out-scale size as zero when the dst size is zero, similar to what is done by drm_calc_scale(). This issue started with the introduction of cursor ovelay mode that uses this function to assess cursor mode changes via dm_crtc_get_cursor_mode() before checking plane state. [Dec17 17:14] Oops: divide error: 0000 [#1] PREEMPT SMP NOPTI [ +0.000018] CPU: 5 PID: 1660 Comm: surface-DP-1 Not tainted 6.10.0+ #231 [ +0.000007] Hardware name: Valve Jupiter/Jupiter, BIOS F7A0131 01/30/2024 [ +0.000004] RIP: 0010:dm_get_plane_scale+0x3f/0x60 [amdgpu] [ +0.000553] Code: 44 0f b7 41 3a 44 0f b7 49 3e 83 e0 0f 48 0f a3 c2 73 21 69 41 28 e8 03 00 00 31 d2 41 f7 f1 31 d2 89 06 69 41 2c e8 03 00 00 <41> f7 f0 89 07 e9 d7 d8 7e e9 44 89 c8 45 89 c1 41 89 c0 eb d4 66 [ +0.000005] RSP: 0018:ffffa8df0de6b8a0 EFLAGS: 00010246 [ +0.000006] RAX: 00000000000003e8 RBX: ffff9ac65c1f6e00 RCX: ffff9ac65d055500 [ +0.000003] RDX: 0000000000000000 RSI: ffffa8df0de6b8b0 RDI: ffffa8df0de6b8b4 [ +0.000004] RBP: ffff9ac64e7a5800 R08: 0000000000000000 R09: 0000000000000a00 [ +0.000003] R10: 00000000000000ff R11: 0000000000000054 R12: ffff9ac6d0700010 [ +0.000003] R13: ffff9ac65d054f00 R14: ffff9ac65d055500 R15: ffff9ac64e7a60a0 [ +0.000004] FS: 00007f869ea00640(0000) GS:ffff9ac970080000(0000) knlGS:0000000000000000 [ +0.000004] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000003] CR2: 000055ca701becd0 CR3: 000000010e7f2000 CR4: 0000000000350ef0 [ +0.000004] Call Trace: [ +0.000007] <TASK> [ +0.000006] ? __die_body.cold+0x19/0x27 [ +0.000009] ? die+0x2e/0x50 [ +0.000007] ? do_trap+0xca/0x110 [ +0.000007] ? do_error_trap+0x6a/0x90 [ +0.000006] ? dm_get_plane_scale+0x3f/0x60 [amdgpu] [ +0.000504] ? exc_divide_error+0x38/0x50 [ +0.000005] ? dm_get_plane_scale+0x3f/0x60 [amdgpu] [ +0.000488] ? asm_exc_divide_error+0x1a/0x20 [ +0.000011] ? dm_get_plane_scale+0x3f/0x60 [amdgpu] [ +0.000593] dm_crtc_get_cursor_mode+0x33f/0x430 [amdgpu] [ +0.000562] amdgpu_dm_atomic_check+0x2ef/0x1770 [amdgpu] [ +0.000501] drm_atomic_check_only+0x5e1/0xa30 [drm] [ +0.000047] drm_mode_atomic_ioctl+0x832/0xcb0 [drm] [ +0.000050] ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 [drm] [ +0.000047] drm_ioctl_kernel+0xb3/0x100 [drm] [ +0.000062] drm_ioctl+0x27a/0x4f0 [drm] [ +0.000049] ? __pfx_drm_mode_atomic_ioctl+0x10/0x10 [drm] [ +0.000055] amdgpu_drm_ioctl+0x4e/0x90 [amdgpu] [ +0.000360] __x64_sys_ioctl+0x97/0xd0 [ +0.000010] do_syscall_64+0x82/0x190 [ +0.000008] ? __pfx_drm_mode_createblob_ioctl+0x10/0x10 [drm] [ +0.000044] ? srso_return_thunk+0x5/0x5f [ +0.000006] ? drm_ioctl_kernel+0xb3/0x100 [drm] [ +0.000040] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? __check_object_size+0x50/0x220 [ +0.000007] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? drm_ioctl+0x2a4/0x4f0 [drm] [ +0.000039] ? __pfx_drm_mode_createblob_ioctl+0x10/0x10 [drm] [ +0.000043] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? __pm_runtime_suspend+0x69/0xc0 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? amdgpu_drm_ioctl+0x71/0x90 [amdgpu] [ +0.000366] ? srso_return_thunk+0x5/0x5f [ +0.000006] ? syscall_exit_to_user_mode+0x77/0x210 [ +0.000007] ? srso_return_thunk+0x5/0x5f [ +0.000005] ? do_syscall_64+0x8e/0x190 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000006] ? do_syscall_64+0x8e/0x190 [ +0.000006] ? srso_return_thunk+0x5/0x5f [ +0.000007] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ +0.000008] RIP: 0033:0x55bb7cd962bc [ +0.000007] Code: 4c 89 6c 24 18 4c 89 64 24 20 4c 89 74 24 28 0f 57 c0 0f 11 44 24 30 89 c7 48 8d 54 24 08 b8 10 00 00 00 be bc 64 38 c0 0f 05 <49> 89 c7 48 83 3b 00 74 09 4c 89 c7 ff 15 62 64 99 00 48 83 7b 18 [ +0.000005] RSP: 002b:00007f869e9f4da0 EFLAGS: 00000217 ORIG_RAX: 0000000000000010 [ +0.000007] RAX: ffffffffffffffda RBX: 00007f869e9f4fb8 RCX: 000055bb7cd962bc [ +0.000004] RDX: 00007f869e9f4da8 RSI: 00000000c03864bc RDI: 000000000000003b [ +0.000003] RBP: 000055bb9ddcbcc0 R08: 00007f86541b9920 R09: 0000000000000009 [ +0.000004] R10: 0000000000000004 R11: 0000000000000217 R12: 00007f865406c6b0 [ +0.000003] R13: 00007f86541b5290 R14: 00007f865410b700 R15: 000055bb9ddcbc18 [ +0.000009] </TASK> Fixes: 1b04dcc ("drm/amd/display: Introduce overlay cursor mode") Link: https://gitlab.freedesktop.org/drm/amd/-/issues/3729 Reported-by: Fabio Scaccabarozzi <fsvm88@gmail.com> Co-developed-by: Fabio Scaccabarozzi <fsvm88@gmail.com> Signed-off-by: Fabio Scaccabarozzi <fsvm88@gmail.com> Signed-off-by: Melissa Wen <mwen@igalia.com> Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit ab75a0d2e07942ae15d32c0a5092fd336451378c) Cc: stable@vger.kernel.org
pmachata
pushed a commit
that referenced
this pull request
Jan 17, 2025
die() can be called in exception handler, and therefore cannot sleep.
However, die() takes spinlock_t which can sleep with PREEMPT_RT enabled.
That causes the following warning:
BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48
in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 285, name: mutex
preempt_count: 110001, expected: 0
RCU nest depth: 0, expected: 0
CPU: 0 UID: 0 PID: 285 Comm: mutex Not tainted 6.12.0-rc7-00022-ge19049cf7d56-dirty #234
Hardware name: riscv-virtio,qemu (DT)
Call Trace:
dump_backtrace+0x1c/0x24
show_stack+0x2c/0x38
dump_stack_lvl+0x5a/0x72
dump_stack+0x14/0x1c
__might_resched+0x130/0x13a
rt_spin_lock+0x2a/0x5c
die+0x24/0x112
do_trap_insn_illegal+0xa0/0xea
_new_vmalloc_restore_context_a0+0xcc/0xd8
Oops - illegal instruction [#1]
Switch to use raw_spinlock_t, which does not sleep even with PREEMPT_RT
enabled.
Fixes: 76d2a04 ("RISC-V: Init and Halt Code")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Cc: stable@vger.kernel.org
Reviewed-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Link: https://lore.kernel.org/r/20241118091333.1185288-1-namcao@linutronix.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
pmachata
pushed a commit
that referenced
this pull request
Jan 17, 2025
If GuC fails to load, the driver wedges, but in the process it tries to do stuff that may not be initialized yet. This moves the xe_gt_tlb_invalidation_init() to be done earlier: as its own doc says, it's a software-only initialization and should had been named with the _early() suffix. Move it to be called by xe_gt_init_early(), so the locks and seqno are initialized, avoiding a NULL ptr deref when wedging: xe 0000:03:00.0: [drm] *ERROR* GT0: load failed: status: Reset = 0, BootROM = 0x50, UKernel = 0x00, MIA = 0x00, Auth = 0x01 xe 0000:03:00.0: [drm] *ERROR* GT0: firmware signature verification failed xe 0000:03:00.0: [drm] *ERROR* CRITICAL: Xe has declared device 0000:03:00.0 as wedged. ... BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 9 UID: 0 PID: 3908 Comm: modprobe Tainted: G U W 6.13.0-rc4-xe+ #3 Tainted: [U]=USER, [W]=WARN Hardware name: Intel Corporation Alder Lake Client Platform/AlderLake-S ADP-S DDR5 UDIMM CRB, BIOS ADLSFWI1.R00.3275.A00.2207010640 07/01/2022 RIP: 0010:xe_gt_tlb_invalidation_reset+0x75/0x110 [xe] This can be easily triggered by poking the GuC binary to force a signature failure. There will still be an extra message, xe 0000:03:00.0: [drm] *ERROR* GT0: GuC mmio request 0x4100: no reply 0x4100 but that's better than a NULL ptr deref. Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/3956 Fixes: c9474b7 ("drm/xe: Wedge the entire device") Reviewed-by: Matthew Brost <matthew.brost@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20250103001111.331684-2-lucas.demarchi@intel.com Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> (cherry picked from commit 5001ef3af8f2c972d6fd9c5221a8457556f8bea6) Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
pmachata
pushed a commit
that referenced
this pull request
Jan 17, 2025
Max Makarov reported kernel panic [1] in perf user callchain code. The reason for that is the race between uprobe_free_utask and bpf profiler code doing the perf user stack unwind and is triggered within uprobe_free_utask function: - after current->utask is freed and - before current->utask is set to NULL general protection fault, probably for non-canonical address 0x9e759c37ee555c76: 0000 [#1] SMP PTI RIP: 0010:is_uprobe_at_func_entry+0x28/0x80 ... ? die_addr+0x36/0x90 ? exc_general_protection+0x217/0x420 ? asm_exc_general_protection+0x26/0x30 ? is_uprobe_at_func_entry+0x28/0x80 perf_callchain_user+0x20a/0x360 get_perf_callchain+0x147/0x1d0 bpf_get_stackid+0x60/0x90 bpf_prog_9aac297fb833e2f5_do_perf_event+0x434/0x53b ? __smp_call_single_queue+0xad/0x120 bpf_overflow_handler+0x75/0x110 ... asm_sysvec_apic_timer_interrupt+0x1a/0x20 RIP: 0010:__kmem_cache_free+0x1cb/0x350 ... ? uprobe_free_utask+0x62/0x80 ? acct_collect+0x4c/0x220 uprobe_free_utask+0x62/0x80 mm_release+0x12/0xb0 do_exit+0x26b/0xaa0 __x64_sys_exit+0x1b/0x20 do_syscall_64+0x5a/0x80 It can be easily reproduced by running following commands in separate terminals: # while :; do bpftrace -e 'uprobe:/bin/ls:_start { printf("hit\n"); }' -c ls; done # bpftrace -e 'profile:hz:100000 { @[ustack()] = count(); }' Fixing this by making sure current->utask pointer is set to NULL before we start to release the utask object. [1] grafana/pyroscope#3673 Fixes: cfa7f3d ("perf,x86: avoid missing caller address in stack traces captured in uprobe") Reported-by: Max Makarov <maxpain@linux.com> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Oleg Nesterov <oleg@redhat.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/r/20250109141440.2692173-1-jolsa@kernel.org
pmachata
pushed a commit
that referenced
this pull request
Jan 17, 2025
In mana_driver_exit(), mana_debugfs_root gets cleanup before any of it's children (which happens later in the pci_unregister_driver()). Due to this, when mana driver is configured as a module and rmmod is invoked, following stack gets printed along with failure in rmmod command. [ 2399.317651] BUG: kernel NULL pointer dereference, address: 0000000000000098 [ 2399.318657] #PF: supervisor write access in kernel mode [ 2399.319057] #PF: error_code(0x0002) - not-present page [ 2399.319528] PGD 10eb68067 P4D 0 [ 2399.319914] Oops: Oops: 0002 [#1] SMP NOPTI [ 2399.320308] CPU: 72 UID: 0 PID: 5815 Comm: rmmod Not tainted 6.13.0-rc5+ #89 [ 2399.320986] Hardware name: Microsoft Corporation Virtual Machine/Virtual Machine, BIOS Hyper-V UEFI Release v4.1 09/28/2024 [ 2399.321892] RIP: 0010:down_write+0x1a/0x50 [ 2399.322303] Code: 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 90 0f 1f 44 00 00 55 48 89 e5 41 54 49 89 fc e8 9d cd ff ff 31 c0 ba 01 00 00 00 <f0> 49 0f b1 14 24 75 17 65 48 8b 05 f6 84 dd 5f 49 89 44 24 08 4c [ 2399.323669] RSP: 0018:ff53859d6c663a70 EFLAGS: 00010246 [ 2399.324061] RAX: 0000000000000000 RBX: ff1d4eb505060180 RCX: ffffff8100000000 [ 2399.324620] RDX: 0000000000000001 RSI: 0000000000000064 RDI: 0000000000000098 [ 2399.325167] RBP: ff53859d6c663a78 R08: 00000000000009c4 R09: ff1d4eb4fac90000 [ 2399.325681] R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000098 [ 2399.326185] R13: ff1d4e42e1a4a0c8 R14: ff1d4eb538ce0000 R15: 0000000000000098 [ 2399.326755] FS: 00007fe729570000(0000) GS:ff1d4eb2b7200000(0000) knlGS:0000000000000000 [ 2399.327269] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2399.327690] CR2: 0000000000000098 CR3: 00000001c0584005 CR4: 0000000000373ef0 [ 2399.328166] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 2399.328623] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 [ 2399.329055] Call Trace: [ 2399.329243] <TASK> [ 2399.329379] ? show_regs+0x69/0x80 [ 2399.329602] ? __die+0x25/0x70 [ 2399.329856] ? page_fault_oops+0x271/0x550 [ 2399.330088] ? psi_group_change+0x217/0x470 [ 2399.330341] ? do_user_addr_fault+0x455/0x7b0 [ 2399.330667] ? finish_task_switch.isra.0+0x91/0x2f0 [ 2399.331004] ? exc_page_fault+0x73/0x160 [ 2399.331275] ? asm_exc_page_fault+0x27/0x30 [ 2399.343324] ? down_write+0x1a/0x50 [ 2399.343631] simple_recursive_removal+0x4d/0x2c0 [ 2399.343977] ? __pfx_remove_one+0x10/0x10 [ 2399.344251] debugfs_remove+0x45/0x70 [ 2399.344511] mana_destroy_rxq+0x44/0x400 [mana] [ 2399.344845] mana_destroy_vport+0x54/0x1c0 [mana] [ 2399.345229] mana_detach+0x2f1/0x4e0 [mana] [ 2399.345466] ? ida_free+0x150/0x160 [ 2399.345718] ? __cond_resched+0x1a/0x50 [ 2399.345987] mana_remove+0xf4/0x1a0 [mana] [ 2399.346243] mana_gd_remove+0x25/0x80 [mana] [ 2399.346605] pci_device_remove+0x41/0xb0 [ 2399.346878] device_remove+0x46/0x70 [ 2399.347150] device_release_driver_internal+0x1e3/0x250 [ 2399.347831] ? klist_remove+0x81/0xe0 [ 2399.348377] driver_detach+0x4b/0xa0 [ 2399.348906] bus_remove_driver+0x83/0x100 [ 2399.349435] driver_unregister+0x31/0x60 [ 2399.349919] pci_unregister_driver+0x40/0x90 [ 2399.350492] mana_driver_exit+0x1c/0xb50 [mana] [ 2399.351102] __do_sys_delete_module.constprop.0+0x184/0x320 [ 2399.351664] ? __fput+0x1a9/0x2d0 [ 2399.352200] __x64_sys_delete_module+0x12/0x20 [ 2399.352760] x64_sys_call+0x1e66/0x2140 [ 2399.353316] do_syscall_64+0x79/0x150 [ 2399.353813] ? syscall_exit_to_user_mode+0x49/0x230 [ 2399.354346] ? do_syscall_64+0x85/0x150 [ 2399.354816] ? irqentry_exit+0x1d/0x30 [ 2399.355287] ? exc_page_fault+0x7f/0x160 [ 2399.355756] entry_SYSCALL_64_after_hwframe+0x76/0x7e [ 2399.356302] RIP: 0033:0x7fe728d26aeb [ 2399.356776] Code: 73 01 c3 48 8b 0d 45 33 0f 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 15 33 0f 00 f7 d8 64 89 01 48 [ 2399.358372] RSP: 002b:00007ffff954d6f8 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [ 2399.359066] RAX: ffffffffffffffda RBX: 00005609156cc760 RCX: 00007fe728d26aeb [ 2399.359779] RDX: 000000000000000a RSI: 0000000000000800 RDI: 00005609156cc7c8 [ 2399.360535] RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 [ 2399.361261] R10: 00007fe728dbeac0 R11: 0000000000000206 R12: 00007ffff954d950 [ 2399.361952] R13: 00005609156cc2a0 R14: 00007ffff954ee5f R15: 00005609156cc760 [ 2399.362688] </TASK> Fixes: 6607c17 ("net: mana: Enable debugfs files for MANA device") Cc: stable@vger.kernel.org Signed-off-by: Shradha Gupta <shradhagupta@linux.microsoft.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/1736398991-764-1-git-send-email-shradhagupta@linux.microsoft.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
pmachata
pushed a commit
that referenced
this pull request
Jan 17, 2025
This reverts commit eaebeb9. Commit eaebeb9 ("mm: zswap: fix race between [de]compression and CPU hotunplug") used the CPU hotplug lock in zswap compress/decompress operations to protect against a race with CPU hotunplug making some per-CPU resources go away. However, zswap compress/decompress can be reached through reclaim while the lock is held, resulting in a potential deadlock as reported by syzbot: ====================================================== WARNING: possible circular locking dependency detected 6.13.0-rc6-syzkaller-00006-g5428dc1906dd #0 Not tainted ------------------------------------------------------ kswapd0/89 is trying to acquire lock: ffffffff8e7d2ed0 (cpu_hotplug_lock){++++}-{0:0}, at: acomp_ctx_get_cpu mm/zswap.c:886 [inline] ffffffff8e7d2ed0 (cpu_hotplug_lock){++++}-{0:0}, at: zswap_compress mm/zswap.c:908 [inline] ffffffff8e7d2ed0 (cpu_hotplug_lock){++++}-{0:0}, at: zswap_store_page mm/zswap.c:1439 [inline] ffffffff8e7d2ed0 (cpu_hotplug_lock){++++}-{0:0}, at: zswap_store+0xa74/0x1ba0 mm/zswap.c:1546 but task is already holding lock: ffffffff8ea355a0 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat mm/vmscan.c:6871 [inline] ffffffff8ea355a0 (fs_reclaim){+.+.}-{0:0}, at: kswapd+0xb58/0x2f30 mm/vmscan.c:7253 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (fs_reclaim){+.+.}-{0:0}: lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5849 __fs_reclaim_acquire mm/page_alloc.c:3853 [inline] fs_reclaim_acquire+0x88/0x130 mm/page_alloc.c:3867 might_alloc include/linux/sched/mm.h:318 [inline] slab_pre_alloc_hook mm/slub.c:4070 [inline] slab_alloc_node mm/slub.c:4148 [inline] __kmalloc_cache_node_noprof+0x40/0x3a0 mm/slub.c:4337 kmalloc_node_noprof include/linux/slab.h:924 [inline] alloc_worker kernel/workqueue.c:2638 [inline] create_worker+0x11b/0x720 kernel/workqueue.c:2781 workqueue_prepare_cpu+0xe3/0x170 kernel/workqueue.c:6628 cpuhp_invoke_callback+0x48d/0x830 kernel/cpu.c:194 __cpuhp_invoke_callback_range kernel/cpu.c:965 [inline] cpuhp_invoke_callback_range kernel/cpu.c:989 [inline] cpuhp_up_callbacks kernel/cpu.c:1020 [inline] _cpu_up+0x2b3/0x580 kernel/cpu.c:1690 cpu_up+0x184/0x230 kernel/cpu.c:1722 cpuhp_bringup_mask+0xdf/0x260 kernel/cpu.c:1788 cpuhp_bringup_cpus_parallel+0xf9/0x160 kernel/cpu.c:1878 bringup_nonboot_cpus+0x2b/0x50 kernel/cpu.c:1892 smp_init+0x34/0x150 kernel/smp.c:1009 kernel_init_freeable+0x417/0x5d0 init/main.c:1569 kernel_init+0x1d/0x2b0 init/main.c:1466 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 -> #0 (cpu_hotplug_lock){++++}-{0:0}: check_prev_add kernel/locking/lockdep.c:3161 [inline] check_prevs_add kernel/locking/lockdep.c:3280 [inline] validate_chain+0x18ef/0x5920 kernel/locking/lockdep.c:3904 __lock_acquire+0x1397/0x2100 kernel/locking/lockdep.c:5226 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5849 percpu_down_read include/linux/percpu-rwsem.h:51 [inline] cpus_read_lock+0x42/0x150 kernel/cpu.c:490 acomp_ctx_get_cpu mm/zswap.c:886 [inline] zswap_compress mm/zswap.c:908 [inline] zswap_store_page mm/zswap.c:1439 [inline] zswap_store+0xa74/0x1ba0 mm/zswap.c:1546 swap_writepage+0x647/0xce0 mm/page_io.c:279 shmem_writepage+0x1248/0x1610 mm/shmem.c:1579 pageout mm/vmscan.c:696 [inline] shrink_folio_list+0x35ee/0x57e0 mm/vmscan.c:1374 shrink_inactive_list mm/vmscan.c:1967 [inline] shrink_list mm/vmscan.c:2205 [inline] shrink_lruvec+0x16db/0x2f30 mm/vmscan.c:5734 mem_cgroup_shrink_node+0x385/0x8e0 mm/vmscan.c:6575 mem_cgroup_soft_reclaim mm/memcontrol-v1.c:312 [inline] memcg1_soft_limit_reclaim+0x346/0x810 mm/memcontrol-v1.c:362 balance_pgdat mm/vmscan.c:6975 [inline] kswapd+0x17b3/0x2f30 mm/vmscan.c:7253 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(fs_reclaim); lock(cpu_hotplug_lock); lock(fs_reclaim); rlock(cpu_hotplug_lock); *** DEADLOCK *** 1 lock held by kswapd0/89: #0: ffffffff8ea355a0 (fs_reclaim){+.+.}-{0:0}, at: balance_pgdat mm/vmscan.c:6871 [inline] #0: ffffffff8ea355a0 (fs_reclaim){+.+.}-{0:0}, at: kswapd+0xb58/0x2f30 mm/vmscan.c:7253 stack backtrace: CPU: 0 UID: 0 PID: 89 Comm: kswapd0 Not tainted 6.13.0-rc6-syzkaller-00006-g5428dc1906dd #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 09/13/2024 Call Trace: <TASK> __dump_stack lib/dump_stack.c:94 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:120 print_circular_bug+0x13a/0x1b0 kernel/locking/lockdep.c:2074 check_noncircular+0x36a/0x4a0 kernel/locking/lockdep.c:2206 check_prev_add kernel/locking/lockdep.c:3161 [inline] check_prevs_add kernel/locking/lockdep.c:3280 [inline] validate_chain+0x18ef/0x5920 kernel/locking/lockdep.c:3904 __lock_acquire+0x1397/0x2100 kernel/locking/lockdep.c:5226 lock_acquire+0x1ed/0x550 kernel/locking/lockdep.c:5849 percpu_down_read include/linux/percpu-rwsem.h:51 [inline] cpus_read_lock+0x42/0x150 kernel/cpu.c:490 acomp_ctx_get_cpu mm/zswap.c:886 [inline] zswap_compress mm/zswap.c:908 [inline] zswap_store_page mm/zswap.c:1439 [inline] zswap_store+0xa74/0x1ba0 mm/zswap.c:1546 swap_writepage+0x647/0xce0 mm/page_io.c:279 shmem_writepage+0x1248/0x1610 mm/shmem.c:1579 pageout mm/vmscan.c:696 [inline] shrink_folio_list+0x35ee/0x57e0 mm/vmscan.c:1374 shrink_inactive_list mm/vmscan.c:1967 [inline] shrink_list mm/vmscan.c:2205 [inline] shrink_lruvec+0x16db/0x2f30 mm/vmscan.c:5734 mem_cgroup_shrink_node+0x385/0x8e0 mm/vmscan.c:6575 mem_cgroup_soft_reclaim mm/memcontrol-v1.c:312 [inline] memcg1_soft_limit_reclaim+0x346/0x810 mm/memcontrol-v1.c:362 balance_pgdat mm/vmscan.c:6975 [inline] kswapd+0x17b3/0x2f30 mm/vmscan.c:7253 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Revert the change. A different fix for the race with CPU hotunplug will follow. Link: https://lkml.kernel.org/r/20250107222236.2715883-1-yosryahmed@google.com Signed-off-by: Yosry Ahmed <yosryahmed@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Barry Song <baohua@kernel.org> Cc: Chengming Zhou <chengming.zhou@linux.dev> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Kanchana P Sridhar <kanchana.p.sridhar@intel.com> Cc: Nhat Pham <nphamcs@gmail.com> Cc: Sam Sun <samsun1006219@gmail.com> Cc: Vitaly Wool <vitalywool@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
pmachata
pushed a commit
that referenced
this pull request
Jan 17, 2025
A livepatch module can contain a special relocation section .klp.rela.<objname>.<secname> to apply its relocations at the appropriate time and to additionally access local and unexported symbols. When <objname> points to another module, such relocations are processed separately from the regular module relocation process. For instance, only when the target <objname> actually becomes loaded. With CONFIG_STRICT_MODULE_RWX, when the livepatch core decides to apply these relocations, their processing results in the following bug: [ 25.827238] BUG: unable to handle page fault for address: 00000000000012ba [ 25.827819] #PF: supervisor read access in kernel mode [ 25.828153] #PF: error_code(0x0000) - not-present page [ 25.828588] PGD 0 P4D 0 [ 25.829063] Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI [ 25.829742] CPU: 2 UID: 0 PID: 452 Comm: insmod Tainted: G O K 6.13.0-rc4-00078-g059dd502b263 #7820 [ 25.830417] Tainted: [O]=OOT_MODULE, [K]=LIVEPATCH [ 25.830768] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-20220807_005459-localhost 04/01/2014 [ 25.831651] RIP: 0010:memcmp+0x24/0x60 [ 25.832190] Code: [...] [ 25.833378] RSP: 0018:ffffa40b403a3ae8 EFLAGS: 00000246 [ 25.833637] RAX: 0000000000000000 RBX: ffff93bc81d8e700 RCX: ffffffffc0202000 [ 25.834072] RDX: 0000000000000000 RSI: 0000000000000004 RDI: 00000000000012ba [ 25.834548] RBP: ffffa40b403a3b68 R08: ffffa40b403a3b30 R09: 0000004a00000002 [ 25.835088] R10: ffffffffffffd222 R11: f000000000000000 R12: 0000000000000000 [ 25.835666] R13: ffffffffc02032ba R14: ffffffffc007d1e0 R15: 0000000000000004 [ 25.836139] FS: 00007fecef8c3080(0000) GS:ffff93bc8f900000(0000) knlGS:0000000000000000 [ 25.836519] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 25.836977] CR2: 00000000000012ba CR3: 0000000002f24000 CR4: 00000000000006f0 [ 25.837442] Call Trace: [ 25.838297] <TASK> [ 25.841083] __write_relocate_add.constprop.0+0xc7/0x2b0 [ 25.841701] apply_relocate_add+0x75/0xa0 [ 25.841973] klp_write_section_relocs+0x10e/0x140 [ 25.842304] klp_write_object_relocs+0x70/0xa0 [ 25.842682] klp_init_object_loaded+0x21/0xf0 [ 25.842972] klp_enable_patch+0x43d/0x900 [ 25.843572] do_one_initcall+0x4c/0x220 [ 25.844186] do_init_module+0x6a/0x260 [ 25.844423] init_module_from_file+0x9c/0xe0 [ 25.844702] idempotent_init_module+0x172/0x270 [ 25.845008] __x64_sys_finit_module+0x69/0xc0 [ 25.845253] do_syscall_64+0x9e/0x1a0 [ 25.845498] entry_SYSCALL_64_after_hwframe+0x77/0x7f [ 25.846056] RIP: 0033:0x7fecef9eb25d [ 25.846444] Code: [...] [ 25.847563] RSP: 002b:00007ffd0c5d6de8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 [ 25.848082] RAX: ffffffffffffffda RBX: 000055b03f05e470 RCX: 00007fecef9eb25d [ 25.848456] RDX: 0000000000000000 RSI: 000055b001e74e52 RDI: 0000000000000003 [ 25.848969] RBP: 00007ffd0c5d6ea0 R08: 0000000000000040 R09: 0000000000004100 [ 25.849411] R10: 00007fecefac7b20 R11: 0000000000000246 R12: 000055b001e74e52 [ 25.849905] R13: 0000000000000000 R14: 000055b03f05e440 R15: 0000000000000000 [ 25.850336] </TASK> [ 25.850553] Modules linked in: deku(OK+) uinput [ 25.851408] CR2: 00000000000012ba [ 25.852085] ---[ end trace 0000000000000000 ]--- The problem is that the .klp.rela.<objname>.<secname> relocations are processed after the module was already formed and mod->rw_copy was reset. However, the code in __write_relocate_add() calls module_writable_address() which translates the target address 'loc' still to 'loc + (mem->rw_copy - mem->base)', with mem->rw_copy now being 0. Fix the problem by returning directly 'loc' in module_writable_address() when the module is already formed. Function __write_relocate_add() knows to use text_poke() in such a case. Link: https://lkml.kernel.org/r/20250107153507.14733-1-petr.pavlu@suse.com Fixes: 0c133b1 ("module: prepare to handle ROX allocations for text") Signed-off-by: Petr Pavlu <petr.pavlu@suse.com> Reported-by: Marek Maslanka <mmaslanka@google.com> Closes: https://lore.kernel.org/linux-modules/CAGcaFA2hdThQV6mjD_1_U+GNHThv84+MQvMWLgEuX+LVbAyDxg@mail.gmail.com/ Reviewed-by: Petr Mladek <pmladek@suse.com> Tested-by: Petr Mladek <pmladek@suse.com> Cc: Joe Lawrence <joe.lawrence@redhat.com> Cc: Josh Poimboeuf <jpoimboe@kernel.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Mike Rapoport (Microsoft) <rppt@kernel.org> Cc: Petr Mladek <pmladek@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
pmachata
pushed a commit
that referenced
this pull request
Jan 17, 2025
Some of the core functions can only be called if the transport
has been assigned.
As Michal reported, a socket might have the transport at NULL,
for example after a failed connect(), causing the following trace:
BUG: kernel NULL pointer dereference, address: 00000000000000a0
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 12faf8067 P4D 12faf8067 PUD 113670067 PMD 0
Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
CPU: 15 UID: 0 PID: 1198 Comm: a.out Not tainted 6.13.0-rc2+
RIP: 0010:vsock_connectible_has_data+0x1f/0x40
Call Trace:
vsock_bpf_recvmsg+0xca/0x5e0
sock_recvmsg+0xb9/0xc0
__sys_recvfrom+0xb3/0x130
__x64_sys_recvfrom+0x20/0x30
do_syscall_64+0x93/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
So we need to check the `vsk->transport` in vsock_bpf_recvmsg(),
especially for connected sockets (stream/seqpacket) as we already
do in __vsock_connectible_recvmsg().
Fixes: 634f1a7 ("vsock: support sockmap")
Cc: stable@vger.kernel.org
Reported-by: Michal Luczaj <mhal@rbox.co>
Closes: https://lore.kernel.org/netdev/5ca20d4c-1017-49c2-9516-f6f75fd331e9@rbox.co/
Tested-by: Michal Luczaj <mhal@rbox.co>
Reported-by: syzbot+3affdbfc986ecd9200fd@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/677f84a8.050a0220.25a300.01b3.GAE@google.com/
Tested-by: syzbot+3affdbfc986ecd9200fd@syzkaller.appspotmail.com
Reviewed-by: Hyunwoo Kim <v4bel@theori.io>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Luigi Leonardi <leonardi@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
pmachata
pushed a commit
that referenced
this pull request
Jan 17, 2025
Fix a lockdep warning [1] observed during the write combining test.
The warning indicates a potential nested lock scenario that could lead
to a deadlock.
However, this is a false positive alarm because the SF lock and its
parent lock are distinct ones.
The lockdep confusion arises because the locks belong to the same object
class (i.e., struct mlx5_core_dev).
To resolve this, the code has been refactored to avoid taking both
locks. Instead, only the parent lock is acquired.
[1]
raw_ethernet_bw/2118 is trying to acquire lock:
[ 213.619032] ffff88811dd75e08 (&dev->wc_state_lock){+.+.}-{3:3}, at:
mlx5_wc_support_get+0x18c/0x210 [mlx5_core]
[ 213.620270]
[ 213.620270] but task is already holding lock:
[ 213.620943] ffff88810b585e08 (&dev->wc_state_lock){+.+.}-{3:3}, at:
mlx5_wc_support_get+0x10c/0x210 [mlx5_core]
[ 213.622045]
[ 213.622045] other info that might help us debug this:
[ 213.622778] Possible unsafe locking scenario:
[ 213.622778]
[ 213.623465] CPU0
[ 213.623815] ----
[ 213.624148] lock(&dev->wc_state_lock);
[ 213.624615] lock(&dev->wc_state_lock);
[ 213.625071]
[ 213.625071] *** DEADLOCK ***
[ 213.625071]
[ 213.625805] May be due to missing lock nesting notation
[ 213.625805]
[ 213.626522] 4 locks held by raw_ethernet_bw/2118:
[ 213.627019] #0: ffff88813f80d578 (&uverbs_dev->disassociate_srcu){.+.+}-{0:0},
at: ib_uverbs_ioctl+0xc4/0x170 [ib_uverbs]
[ 213.628088] #1: ffff88810fb23930 (&file->hw_destroy_rwsem){.+.+}-{3:3},
at: ib_init_ucontext+0x2d/0xf0 [ib_uverbs]
[ 213.629094] #2: ffff88810fb23878 (&file->ucontext_lock){+.+.}-{3:3},
at: ib_init_ucontext+0x49/0xf0 [ib_uverbs]
[ 213.630106] #3: ffff88810b585e08 (&dev->wc_state_lock){+.+.}-{3:3},
at: mlx5_wc_support_get+0x10c/0x210 [mlx5_core]
[ 213.631185]
[ 213.631185] stack backtrace:
[ 213.631718] CPU: 1 UID: 0 PID: 2118 Comm: raw_ethernet_bw Not tainted
6.12.0-rc7_internal_net_next_mlx5_89a0ad0 #1
[ 213.632722] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS
rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
[ 213.633785] Call Trace:
[ 213.634099]
[ 213.634393] dump_stack_lvl+0x7e/0xc0
[ 213.634806] print_deadlock_bug+0x278/0x3c0
[ 213.635265] __lock_acquire+0x15f4/0x2c40
[ 213.635712] lock_acquire+0xcd/0x2d0
[ 213.636120] ? mlx5_wc_support_get+0x18c/0x210 [mlx5_core]
[ 213.636722] ? mlx5_ib_enable_lb+0x24/0xa0 [mlx5_ib]
[ 213.637277] __mutex_lock+0x81/0xda0
[ 213.637697] ? mlx5_wc_support_get+0x18c/0x210 [mlx5_core]
[ 213.638305] ? mlx5_wc_support_get+0x18c/0x210 [mlx5_core]
[ 213.638902] ? rcu_read_lock_sched_held+0x3f/0x70
[ 213.639400] ? mlx5_wc_support_get+0x18c/0x210 [mlx5_core]
[ 213.640016] mlx5_wc_support_get+0x18c/0x210 [mlx5_core]
[ 213.640615] set_ucontext_resp+0x68/0x2b0 [mlx5_ib]
[ 213.641144] ? debug_mutex_init+0x33/0x40
[ 213.641586] mlx5_ib_alloc_ucontext+0x18e/0x7b0 [mlx5_ib]
[ 213.642145] ib_init_ucontext+0xa0/0xf0 [ib_uverbs]
[ 213.642679] ib_uverbs_handler_UVERBS_METHOD_GET_CONTEXT+0x95/0xc0
[ib_uverbs]
[ 213.643426] ? _copy_from_user+0x46/0x80
[ 213.643878] ib_uverbs_cmd_verbs+0xa6b/0xc80 [ib_uverbs]
[ 213.644426] ? ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x130/0x130
[ib_uverbs]
[ 213.645213] ? __lock_acquire+0xa99/0x2c40
[ 213.645675] ? lock_acquire+0xcd/0x2d0
[ 213.646101] ? ib_uverbs_ioctl+0xc4/0x170 [ib_uverbs]
[ 213.646625] ? reacquire_held_locks+0xcf/0x1f0
[ 213.647102] ? do_user_addr_fault+0x45d/0x770
[ 213.647586] ib_uverbs_ioctl+0xe0/0x170 [ib_uverbs]
[ 213.648102] ? ib_uverbs_ioctl+0xc4/0x170 [ib_uverbs]
[ 213.648632] __x64_sys_ioctl+0x4d3/0xaa0
[ 213.649060] ? do_user_addr_fault+0x4a8/0x770
[ 213.649528] do_syscall_64+0x6d/0x140
[ 213.649947] entry_SYSCALL_64_after_hwframe+0x4b/0x53
[ 213.650478] RIP: 0033:0x7fa179b0737b
[ 213.650893] Code: ff ff ff 85 c0 79 9b 49 c7 c4 ff ff ff ff 5b 5d 4c
89 e0 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa b8
10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d
7d 2a 0f 00 f7 d8 64 89 01 48
[ 213.652619] RSP: 002b:00007ffd2e6d46e8 EFLAGS: 00000246 ORIG_RAX:
0000000000000010
[ 213.653390] RAX: ffffffffffffffda RBX: 00007ffd2e6d47f8 RCX:
00007fa179b0737b
[ 213.654084] RDX: 00007ffd2e6d47e0 RSI: 00000000c0181b01 RDI:
0000000000000003
[ 213.654767] RBP: 00007ffd2e6d47c0 R08: 00007fa1799be010 R09:
0000000000000002
[ 213.655453] R10: 00007ffd2e6d4960 R11: 0000000000000246 R12:
00007ffd2e6d487c
[ 213.656170] R13: 0000000000000027 R14: 0000000000000001 R15:
00007ffd2e6d4f70
Fixes: d98995b ("net/mlx5: Reimplement write combining test")
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Michael Guralnik <michaelgur@nvidia.com>
Reviewed-by: Larysa Zaremba <larysa.zaremba@intel.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
pmachata
pushed a commit
that referenced
this pull request
Jan 17, 2025
Clear the port select structure on error so no stale values left after
definers are destroyed. That's because the mlx5_lag_destroy_definers()
always try to destroy all lag definers in the tt_map, so in the flow
below lag definers get double-destroyed and cause kernel crash:
mlx5_lag_port_sel_create()
mlx5_lag_create_definers()
mlx5_lag_create_definer() <- Failed on tt 1
mlx5_lag_destroy_definers() <- definers[tt=0] gets destroyed
mlx5_lag_port_sel_create()
mlx5_lag_create_definers()
mlx5_lag_create_definer() <- Failed on tt 0
mlx5_lag_destroy_definers() <- definers[tt=0] gets double-destroyed
Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
Mem abort info:
ESR = 0x0000000096000005
EC = 0x25: DABT (current EL), IL = 32 bits
SET = 0, FnV = 0
EA = 0, S1PTW = 0
FSC = 0x05: level 1 translation fault
Data abort info:
ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000
CM = 0, WnR = 0, TnD = 0, TagAccess = 0
GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
user pgtable: 64k pages, 48-bit VAs, pgdp=0000000112ce2e00
[0000000000000008] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
Modules linked in: iptable_raw bonding ip_gre ip6_gre gre ip6_tunnel tunnel6 geneve ip6_udp_tunnel udp_tunnel ipip tunnel4 ip_tunnel rdma_ucm(OE) rdma_cm(OE) iw_cm(OE) ib_ipoib(OE) ib_cm(OE) ib_umad(OE) mlx5_ib(OE) ib_uverbs(OE) mlx5_fwctl(OE) fwctl(OE) mlx5_core(OE) mlxdevm(OE) ib_core(OE) mlxfw(OE) memtrack(OE) mlx_compat(OE) openvswitch nsh nf_conncount psample xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xfrm_user xfrm_algo xt_addrtype iptable_filter iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter bridge stp llc netconsole overlay efi_pstore sch_fq_codel zram ip_tables crct10dif_ce qemu_fw_cfg fuse ipv6 crc_ccitt [last unloaded: mlx_compat(OE)]
CPU: 3 UID: 0 PID: 217 Comm: kworker/u53:2 Tainted: G OE 6.11.0+ #2
Tainted: [O]=OOT_MODULE, [E]=UNSIGNED_MODULE
Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0 02/06/2015
Workqueue: mlx5_lag mlx5_do_bond_work [mlx5_core]
pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : mlx5_del_flow_rules+0x24/0x2c0 [mlx5_core]
lr : mlx5_lag_destroy_definer+0x54/0x100 [mlx5_core]
sp : ffff800085fafb00
x29: ffff800085fafb00 x28: ffff0000da0c8000 x27: 0000000000000000
x26: ffff0000da0c8000 x25: ffff0000da0c8000 x24: ffff0000da0c8000
x23: ffff0000c31f81a0 x22: 0400000000000000 x21: ffff0000da0c8000
x20: 0000000000000000 x19: 0000000000000001 x18: 0000000000000000
x17: 0000000000000000 x16: 0000000000000000 x15: 0000ffff8b0c9350
x14: 0000000000000000 x13: ffff800081390d18 x12: ffff800081dc3cc0
x11: 0000000000000001 x10: 0000000000000b10 x9 : ffff80007ab7304c
x8 : ffff0000d00711f0 x7 : 0000000000000004 x6 : 0000000000000190
x5 : ffff00027edb3010 x4 : 0000000000000000 x3 : 0000000000000000
x2 : ffff0000d39b8000 x1 : ffff0000d39b8000 x0 : 0400000000000000
Call trace:
mlx5_del_flow_rules+0x24/0x2c0 [mlx5_core]
mlx5_lag_destroy_definer+0x54/0x100 [mlx5_core]
mlx5_lag_destroy_definers+0xa0/0x108 [mlx5_core]
mlx5_lag_port_sel_create+0x2d4/0x6f8 [mlx5_core]
mlx5_activate_lag+0x60c/0x6f8 [mlx5_core]
mlx5_do_bond_work+0x284/0x5c8 [mlx5_core]
process_one_work+0x170/0x3e0
worker_thread+0x2d8/0x3e0
kthread+0x11c/0x128
ret_from_fork+0x10/0x20
Code: a9025bf5 aa0003f6 a90363f7 f90023f9 (f9400400)
---[ end trace 0000000000000000 ]---
Fixes: dc48516 ("net/mlx5: Lag, add support to create definers for LAG")
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
pmachata
pushed a commit
that referenced
this pull request
Jan 17, 2025
Attempt to enable IPsec packet offload in tunnel mode in debug kernel
generates the following kernel panic, which is happening due to two
issues:
1. In SA add section, the should be _bh() variant when marking SA mode.
2. There is not needed flush_workqueue in SA delete routine. It is not
needed as at this stage as it is removed from SADB and the running work
will be canceled later in SA free.
=====================================================
WARNING: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected
6.12.0+ #4 Not tainted
-----------------------------------------------------
charon/1337 [HC0[0]:SC0[4]:HE1:SE0] is trying to acquire:
ffff88810f365020 (&xa->xa_lock#24){+.+.}-{3:3}, at: mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core]
and this task is already holding:
ffff88813e0f0d48 (&x->lock){+.-.}-{3:3}, at: xfrm_state_delete+0x16/0x30
which would create a new lock dependency:
(&x->lock){+.-.}-{3:3} -> (&xa->xa_lock#24){+.+.}-{3:3}
but this new dependency connects a SOFTIRQ-irq-safe lock:
(&x->lock){+.-.}-{3:3}
... which became SOFTIRQ-irq-safe at:
lock_acquire+0x1be/0x520
_raw_spin_lock_bh+0x34/0x40
xfrm_timer_handler+0x91/0xd70
__hrtimer_run_queues+0x1dd/0xa60
hrtimer_run_softirq+0x146/0x2e0
handle_softirqs+0x266/0x860
irq_exit_rcu+0x115/0x1a0
sysvec_apic_timer_interrupt+0x6e/0x90
asm_sysvec_apic_timer_interrupt+0x16/0x20
default_idle+0x13/0x20
default_idle_call+0x67/0xa0
do_idle+0x2da/0x320
cpu_startup_entry+0x50/0x60
start_secondary+0x213/0x2a0
common_startup_64+0x129/0x138
to a SOFTIRQ-irq-unsafe lock:
(&xa->xa_lock#24){+.+.}-{3:3}
... which became SOFTIRQ-irq-unsafe at:
...
lock_acquire+0x1be/0x520
_raw_spin_lock+0x2c/0x40
xa_set_mark+0x70/0x110
mlx5e_xfrm_add_state+0xe48/0x2290 [mlx5_core]
xfrm_dev_state_add+0x3bb/0xd70
xfrm_add_sa+0x2451/0x4a90
xfrm_user_rcv_msg+0x493/0x880
netlink_rcv_skb+0x12e/0x380
xfrm_netlink_rcv+0x6d/0x90
netlink_unicast+0x42f/0x740
netlink_sendmsg+0x745/0xbe0
__sock_sendmsg+0xc5/0x190
__sys_sendto+0x1fe/0x2c0
__x64_sys_sendto+0xdc/0x1b0
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
other info that might help us debug this:
Possible interrupt unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&xa->xa_lock#24);
local_irq_disable();
lock(&x->lock);
lock(&xa->xa_lock#24);
<Interrupt>
lock(&x->lock);
*** DEADLOCK ***
2 locks held by charon/1337:
#0: ffffffff87f8f858 (&net->xfrm.xfrm_cfg_mutex){+.+.}-{4:4}, at: xfrm_netlink_rcv+0x5e/0x90
#1: ffff88813e0f0d48 (&x->lock){+.-.}-{3:3}, at: xfrm_state_delete+0x16/0x30
the dependencies between SOFTIRQ-irq-safe lock and the holding lock:
-> (&x->lock){+.-.}-{3:3} ops: 29 {
HARDIRQ-ON-W at:
lock_acquire+0x1be/0x520
_raw_spin_lock_bh+0x34/0x40
xfrm_alloc_spi+0xc0/0xe60
xfrm_alloc_userspi+0x5f6/0xbc0
xfrm_user_rcv_msg+0x493/0x880
netlink_rcv_skb+0x12e/0x380
xfrm_netlink_rcv+0x6d/0x90
netlink_unicast+0x42f/0x740
netlink_sendmsg+0x745/0xbe0
__sock_sendmsg+0xc5/0x190
__sys_sendto+0x1fe/0x2c0
__x64_sys_sendto+0xdc/0x1b0
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
IN-SOFTIRQ-W at:
lock_acquire+0x1be/0x520
_raw_spin_lock_bh+0x34/0x40
xfrm_timer_handler+0x91/0xd70
__hrtimer_run_queues+0x1dd/0xa60
hrtimer_run_softirq+0x146/0x2e0
handle_softirqs+0x266/0x860
irq_exit_rcu+0x115/0x1a0
sysvec_apic_timer_interrupt+0x6e/0x90
asm_sysvec_apic_timer_interrupt+0x16/0x20
default_idle+0x13/0x20
default_idle_call+0x67/0xa0
do_idle+0x2da/0x320
cpu_startup_entry+0x50/0x60
start_secondary+0x213/0x2a0
common_startup_64+0x129/0x138
INITIAL USE at:
lock_acquire+0x1be/0x520
_raw_spin_lock_bh+0x34/0x40
xfrm_alloc_spi+0xc0/0xe60
xfrm_alloc_userspi+0x5f6/0xbc0
xfrm_user_rcv_msg+0x493/0x880
netlink_rcv_skb+0x12e/0x380
xfrm_netlink_rcv+0x6d/0x90
netlink_unicast+0x42f/0x740
netlink_sendmsg+0x745/0xbe0
__sock_sendmsg+0xc5/0x190
__sys_sendto+0x1fe/0x2c0
__x64_sys_sendto+0xdc/0x1b0
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
}
... key at: [<ffffffff87f9cd20>] __key.18+0x0/0x40
the dependencies between the lock to be acquired
and SOFTIRQ-irq-unsafe lock:
-> (&xa->xa_lock#24){+.+.}-{3:3} ops: 9 {
HARDIRQ-ON-W at:
lock_acquire+0x1be/0x520
_raw_spin_lock_bh+0x34/0x40
mlx5e_xfrm_add_state+0xc5b/0x2290 [mlx5_core]
xfrm_dev_state_add+0x3bb/0xd70
xfrm_add_sa+0x2451/0x4a90
xfrm_user_rcv_msg+0x493/0x880
netlink_rcv_skb+0x12e/0x380
xfrm_netlink_rcv+0x6d/0x90
netlink_unicast+0x42f/0x740
netlink_sendmsg+0x745/0xbe0
__sock_sendmsg+0xc5/0x190
__sys_sendto+0x1fe/0x2c0
__x64_sys_sendto+0xdc/0x1b0
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
SOFTIRQ-ON-W at:
lock_acquire+0x1be/0x520
_raw_spin_lock+0x2c/0x40
xa_set_mark+0x70/0x110
mlx5e_xfrm_add_state+0xe48/0x2290 [mlx5_core]
xfrm_dev_state_add+0x3bb/0xd70
xfrm_add_sa+0x2451/0x4a90
xfrm_user_rcv_msg+0x493/0x880
netlink_rcv_skb+0x12e/0x380
xfrm_netlink_rcv+0x6d/0x90
netlink_unicast+0x42f/0x740
netlink_sendmsg+0x745/0xbe0
__sock_sendmsg+0xc5/0x190
__sys_sendto+0x1fe/0x2c0
__x64_sys_sendto+0xdc/0x1b0
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
INITIAL USE at:
lock_acquire+0x1be/0x520
_raw_spin_lock_bh+0x34/0x40
mlx5e_xfrm_add_state+0xc5b/0x2290 [mlx5_core]
xfrm_dev_state_add+0x3bb/0xd70
xfrm_add_sa+0x2451/0x4a90
xfrm_user_rcv_msg+0x493/0x880
netlink_rcv_skb+0x12e/0x380
xfrm_netlink_rcv+0x6d/0x90
netlink_unicast+0x42f/0x740
netlink_sendmsg+0x745/0xbe0
__sock_sendmsg+0xc5/0x190
__sys_sendto+0x1fe/0x2c0
__x64_sys_sendto+0xdc/0x1b0
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
}
... key at: [<ffffffffa078ff60>] __key.48+0x0/0xfffffffffff210a0 [mlx5_core]
... acquired at:
__lock_acquire+0x30a0/0x5040
lock_acquire+0x1be/0x520
_raw_spin_lock_bh+0x34/0x40
mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core]
xfrm_dev_state_delete+0x90/0x160
__xfrm_state_delete+0x662/0xae0
xfrm_state_delete+0x1e/0x30
xfrm_del_sa+0x1c2/0x340
xfrm_user_rcv_msg+0x493/0x880
netlink_rcv_skb+0x12e/0x380
xfrm_netlink_rcv+0x6d/0x90
netlink_unicast+0x42f/0x740
netlink_sendmsg+0x745/0xbe0
__sock_sendmsg+0xc5/0x190
__sys_sendto+0x1fe/0x2c0
__x64_sys_sendto+0xdc/0x1b0
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
stack backtrace:
CPU: 7 UID: 0 PID: 1337 Comm: charon Not tainted 6.12.0+ #4
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x74/0xd0
check_irq_usage+0x12e8/0x1d90
? print_shortest_lock_dependencies_backwards+0x1b0/0x1b0
? check_chain_key+0x1bb/0x4c0
? __lockdep_reset_lock+0x180/0x180
? check_path.constprop.0+0x24/0x50
? mark_lock+0x108/0x2fb0
? print_circular_bug+0x9b0/0x9b0
? mark_lock+0x108/0x2fb0
? print_usage_bug.part.0+0x670/0x670
? check_prev_add+0x1c4/0x2310
check_prev_add+0x1c4/0x2310
__lock_acquire+0x30a0/0x5040
? lockdep_set_lock_cmp_fn+0x190/0x190
? lockdep_set_lock_cmp_fn+0x190/0x190
lock_acquire+0x1be/0x520
? mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core]
? lockdep_hardirqs_on_prepare+0x400/0x400
? __xfrm_state_delete+0x5f0/0xae0
? lock_downgrade+0x6b0/0x6b0
_raw_spin_lock_bh+0x34/0x40
? mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core]
mlx5e_xfrm_del_state+0xca/0x1e0 [mlx5_core]
xfrm_dev_state_delete+0x90/0x160
__xfrm_state_delete+0x662/0xae0
xfrm_state_delete+0x1e/0x30
xfrm_del_sa+0x1c2/0x340
? xfrm_get_sa+0x250/0x250
? check_chain_key+0x1bb/0x4c0
xfrm_user_rcv_msg+0x493/0x880
? copy_sec_ctx+0x270/0x270
? check_chain_key+0x1bb/0x4c0
? lockdep_set_lock_cmp_fn+0x190/0x190
? lockdep_set_lock_cmp_fn+0x190/0x190
netlink_rcv_skb+0x12e/0x380
? copy_sec_ctx+0x270/0x270
? netlink_ack+0xd90/0xd90
? netlink_deliver_tap+0xcd/0xb60
xfrm_netlink_rcv+0x6d/0x90
netlink_unicast+0x42f/0x740
? netlink_attachskb+0x730/0x730
? lock_acquire+0x1be/0x520
netlink_sendmsg+0x745/0xbe0
? netlink_unicast+0x740/0x740
? __might_fault+0xbb/0x170
? netlink_unicast+0x740/0x740
__sock_sendmsg+0xc5/0x190
? fdget+0x163/0x1d0
__sys_sendto+0x1fe/0x2c0
? __x64_sys_getpeername+0xb0/0xb0
? do_user_addr_fault+0x856/0xe30
? lock_acquire+0x1be/0x520
? __task_pid_nr_ns+0x117/0x410
? lock_downgrade+0x6b0/0x6b0
__x64_sys_sendto+0xdc/0x1b0
? lockdep_hardirqs_on_prepare+0x284/0x400
do_syscall_64+0x6d/0x140
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x7f7d31291ba4
Code: 7d e8 89 4d d4 e8 4c 42 f7 ff 44 8b 4d d0 4c 8b 45 c8 89 c3 44 8b 55 d4 8b 7d e8 b8 2c 00 00 00 48 8b 55 d8 48 8b 75 e0 0f 05 <48> 3d 00 f0 ff ff 77 34 89 df 48 89 45 e8 e8 99 42 f7 ff 48 8b 45
RSP: 002b:00007f7d2ccd94f0 EFLAGS: 00000297 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f7d31291ba4
RDX: 0000000000000028 RSI: 00007f7d2ccd96a0 RDI: 000000000000000a
RBP: 00007f7d2ccd9530 R08: 00007f7d2ccd9598 R09: 000000000000000c
R10: 0000000000000000 R11: 0000000000000297 R12: 0000000000000028
R13: 00007f7d2ccd9598 R14: 00007f7d2ccd96a0 R15: 00000000000000e1
</TASK>
Fixes: 4c24272 ("net/mlx5e: Listen to ARP events to update IPsec L2 headers in tunnel mode")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
pmachata
pushed a commit
that referenced
this pull request
Jan 17, 2025
A next patch will add support for transmitting XDP frames. There is a limitation to call XDP APIs when budget is zero. In Rx flow, we just skip processing for all packets. For Tx completion, driver should free the SKBs, but can not handle XDP completions. To be able to separate such handling, dedicate SDQ #1 for XDP frames. The driver already dedicates SDQ #0 for EMADs. The appropriate CQ is also dedicated for XDP, as it is dedicated for specific SDQ. Add an enum for SDQ reserved indexes, instead of MLXSW_PCI_SDQ_EMAD_INDEX macro. Derive minimum required SDQs from the new enum. Adjust the exiting code to use the enum and to take into account the reserved SDQ for XDP. Next patches will use this queue. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Bumps pip from 23.2.1 to 23.3.
Changelog
Sourced from pip's changelog.
... (truncated)
Commits
e3dc91dBump for release3e85558Update AUTHORS.txt8d02787Reclassify news fragmentf6ecf40Merge pull request #12350 from sbidoul/readact-collecting-url3060865Merge pull request #12335 from edmorley/patch-18f0ed32Redact URLs in Collecting... logsd1659b8Correct issue number for NEWS entry added by #121972333ef3Upgrade urllib3 to 1.26.17 (#12343)496b268Update "Running Tests" documentation (#12334)d1f0981Merge pull request #12331 from sbidoul/update-egg-deprecation-messageDependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting
@dependabot rebase.Dependabot commands and options
You can trigger Dependabot actions by commenting on this PR:
@dependabot rebasewill rebase this PR@dependabot recreatewill recreate this PR, overwriting any edits that have been made to it@dependabot mergewill merge this PR after your CI passes on it@dependabot squash and mergewill squash and merge this PR after your CI passes on it@dependabot cancel mergewill cancel a previously requested merge and block automerging@dependabot reopenwill reopen this PR if it is closed@dependabot closewill close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually@dependabot show <dependency name> ignore conditionswill show all of the ignore conditions of the specified dependency@dependabot ignore this major versionwill close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)@dependabot ignore this minor versionwill close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)@dependabot ignore this dependencywill close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)You can disable automated security fix PRs for this repo from the Security Alerts page.