Right AUX Spacer Screw Cutout

[L-Walker]

Description

Addition of a .375" radii arc extrude-cut in the top side of the Right Console - Right Aux Spacer to allow the inboard ELEC panel sandwiching screw to seat correctly without interfering with the spacer. I personally have built the entire right console and have encountered this issue, and can confirm that a simple clearance cut will solve the issue without sacrificing structural rigidity.

.375" allows an additional .125" in nut dimensions if metric size (M4) is used. It also allows a socket wrench to be placed around the nut without collision. The structural sacrifice of the extra clearance is negligible.

Addresses Git Issue #199

Detail

Type of change

• Change MCAD (fixed issue with existing MCAD model)
• Bug fix (non-breaking change which fixes an issue)

How Has This Been Tested?

Please describe the tests that you ran to verify your changes. Provide instructions so we can reproduce. Please also list any relevant details for your test configuration

• Test A | Visual inspection within Solidworks to confirm that no interference has been created as a result of the change. This was then confirmed by the Solidworks Interference detection module returning a negative test.

Before

After

Test Configuration:

• Software version: Solidworks Premium 2019
• Hardware: Part printed on Prusa i3MK3s

Checklist:

MCAD:

• Model is in SolidWorks 2019 format
• Design intent and requirements have been met
• Design has been fit checked to ensure no interferences exist
• Design has been integrated into Next Higher Assembly (NHA)