Weather Station

Description

Measure the temperature using your Raspberry device, it's really simple! All you need is a Raspberry, temperature sensor and our project.

• Beautiful graphs
• Exact sunrise and sunset time
• 24 hours maximum and minimum temperature
• Average day, month and year temperature

Requirements

• Raspbery Pi
• Temperature sensor DS18B20
• (Optional) VPS with Ubuntu 15.04 OS - if you want to make your website available on the Internet
• Source files: https://github.com/bumbur/weather_station/archive/master.zip
• Gmail account

Prerequisities

You will need to create an email that will be used to handle server exceptions and send emails to people registered for your newsletter.

The easiest way is to create a brand new Gmail account and follow these instructions: http://docs.helpscout.net/article/120-smtp-settings to make your account available for some scripts.

---

Installation

Raspberry

This tutorial covers installation on Raspberry Model B Revision 2.0 with temperature sensor DS18B20. Firstly, connect temperature sensor to the Raspberry and then install Raspbian Jessie Lite on your Raspberry.

Connect to Raspberry and add the following line to /boot/config.txt:

dtoverlay=w1-gpio

Reboot with:

$ sudo reboot

Run commands:

$ sudo modprobe w1-gpio
$ sudo modprobe w1-therm
$ sudo dpkg-reconfigure tzdata
$ sudo apt-get install python3
$ sudo apt-get install python3-pip

Go to home directory and run:

$ sudo wget https://github.com/bumbur/weather_station/archive/master.zip
$ sudo unzip master.zip
$ cd weather_station-master
$ sudo pip3 install -r rasp_requirements.txt

Move all scripts from 'scripts' folder to /root directory (use root user if necessary).

If you are planning to run your website on VPS server please skip these steps (until temp.py file part):

$ cd /home/weather_station-master/weather_station/weather_station
$ sudo mv settings_secret.py.template settings_secret.py

Go here: http://www.miniwebtool.com/django-secret-key-generator/, generate your key and paste it to settings_secret.py.

Then run:

cd /home
$ sudo mv weather_station-master/weather_station/ /home/weather_station
$ cd /home/weather_station
$ sudo python3 manage.py makemigrations temperatures
$ sudo python3 manage.py migrate
$ sudo python3 manage.py runserver 0.0.0.0:8000

Now you can access your website on any device in your local network by going to web browser and using IP address of your Raspberry followed by port number. It will look like this: 192.168.X.XX:8000. Stop the server for a while and continue with following steps (at the end run it again with the same command).

Open /home/weather_station-master/raspberry_scripts/temp.py file and enter your Gmail account credentials. You can also enter SSH authentication data for your VPS server if your are going to use one. Set variable REMOTE_CONNECTION:

• True - if you are going to use VPS
• False - if you aren't going to use VPS

Open crobtab:

$ sudo crontab -e

Add following line: */10 * * * * sudo python3 /home/weather_station-master/raspberry_scripts/temp.py

Script will save temperature info to the database every 10 minutes.

Set up newsletter now. Open send_mail.py file from root directory. Change variable fromaddr to your Gmail address, for example: ‘weather123@gmail.com’, enter your username and password under SMTP section, save. Open crontab again and add the following line: 00 20 * * * python3 /root/send_mail.py

If you are not using VPS run your server again but in the background this time so it won't stop when you leave terminal. If you want to use VPS, please carry on with the instruction.

WebServer on VPS

If you would like to use ssh on Ubuntu 15.04 you need to login as root and type this in terminal: $ sudo apt-get install openssh-server Additionally, you can also login via SSH as a root user but you need to change this line in /etc/ssh/sshd_config: PermitRootLogin without-password to PermitRootLogin yes and restart the SSH server: $ sudo service ssh restart

1. Make sure you have already installed Ubuntu 15.04 Server (Vivid Vervet)
2. Log in to root user
3. Download source mentioned above
4. There is Python 3.4.3 installed by default
5. Change your timezone by typing in console: $ dpkg-reconfigure tzdata and check appropriate options
6. Restart your system
7. Place web_requirements.txt in, for example, /root location and go to this location
8. Install pip3 by typing in console $ sudo apt-get install python3-pip
9. Install all necessary dependencies: $ pip3 install -r web_requirements.txt
10. Place 'weather_station' folder in /home directory
11. Go to /home/weather_station/weather_station
12. Rename file settings_secret.py.template to settings_secret.py
13. Go here: http://www.miniwebtool.com/django-secret-key-generator/
14. Click "Generate Django Secret Key"
15. Copy Generated Django Secret Key
16. Open settings_secret.py
17. Paste generated value instead your-secret-key (between ' ')
18. Save settings_secret.py
19. Extract 'scripts' folder content in /root directory
20. Open send_mail.py file
21. In the SMTP section replace username and password with your gmail account username and password
22. Change variable fromaddr to your gmail email, for example: 'weather123@gmail.com'
23. Go to the /home/weather_station directory
24. Type this in command line: $ python3 manage.py makemigrations temperatures
25. and $ python3 manage.py migrate
26. Now open crontab: $ crontab -e
27. Add this line at the end: 00 20 * * * python3 /root/send_mail.py
28. Save crontab and leave it
29. You can now go to the /home/weather_station and run server: $ python3 manage.py runserver 0.0.0.0:80

Checking Availability

If you would like to simultanously check web server's availability you can use script from checking_availability folder (check_availability.py). It depends on you, where you want to host this script. What's more important, is fact that you need to replace following variables in this script file(check_availability.py):

• address variable should be set to your web server address, for example: 'http://example.net'
• username and password variables should be set according to your gmail account created before. The script will use this email to send you notifications about failures.

Now you can manually run this script whenever you want, add it to crontab (in the same way you've added other scripts in this tutorial). The choice is yours.

---

This project was implemented by Przemysław Jamrozowicz and Piotr Jatkowski as a Python class assignment.The idea belongs to our techer dr Leszek Grzanka.