ASUS P8Z68 - DELUXE Catalina

Introduction

Bios: Last version

OPEN CORE 0.6.0 RELEASE efi for ASUS P8Z68 - DELUXE Hackintosh Catalina 10.15.6.

CPU: i7-2600 3.40Ghz (intel: Sundy Bride) RAM: 12GB DDR3

GEFORCE GTX 770

Bios

• AI Tweaker > Ai Overclock Tuner > Auto
• AI Tweaker > Turbo Ratio > Auto
• AI Tweaker > Internal PLL Overvoltage > Auto
• AI Tweaker > Memory Frequency > Auto
• AI Tweaker > EPU Power Saving Mode > Disabled
• AI Tweaker > CPU Power Management > CPU Ratio > Auto
• AI Tweaker > CPU Power Management > Enhanced Intel Speedstep Technology > Enabled
• AI Tweaker > CPU Power Management > Turbo Mode > Enabled
• Advanced Settings > CPU Configuration > Active Processor Cores > All
• Advanced Settings > CPU Configuration > Limit CPUID Maximum > Disabled
• Advanced Settings > CPU Configuration > Execute Disable Bit > Enabled
• Advanced Settings > CPU Configuration > Enhanced Intel Speedstep Technology > Enabled
• Advanced Settings > CPU Configuration > Turbo Mode > Enabled
• Advanced Settings > CPU Configuration > CPU C1E > Auto
• Advanced Settings > CPU Configuration > CPU C3 Report > Auto
• Advanced Settings > CPU Configuration > CPU C6 Report > Auto
• Advanced Settings > CPU Configuration > Intel Virtualization Technology > Enabled
• Advanced Settings > PCH Configuration > High Precision Timer > Enabled
• Advanced Settings > SATA Configuration > SATA Mode Selection > AHCI
• Advanced Settings > SATA Configuration > S.M.A.R.T. Status Check > Enabled
• Advanced Settings > System Agent Configuration > Memory Remap Feature > Enabled
• Advanced Settings > System Agent Configuration > Graphics Configuration > Primary Display > Auto
• Advanced Settings > System Agent Configuration > Graphics Configuration > iGPU Memory > 64M
• Advanced Settings > System Agent Configuration > Graphics Configuration > Render Standby > Disabled
• Advanced Settings > System Agent Configuration > Graphics Configuration > iGPU Multi-monitor > Disabled
• Advanced Settings > CPU Configurations > VT-d > Disabled
• Advanced Settings > USB Configuration > Legacy Support > Auto
• Advanced Settings > USB Configuration > Legacy USB 3.0 Support > Enabled
• Advanced Settings > USB Configuration > EHCI Hand-off > Disabled
• Advanced Settings > Onboard Devices Configuration > HD Audio Controller > Enabled
• Advanced Settings > Onboard Devices Configuration > Front Panel Type > HD
• Advanced Settings > Onboard Devices Configuration > SPDIF Out Type > SPDIF
• Advanced Settings > Onboard Devices Configuration > Bluetooth Controller > Enabled
• Advanced Settings > Onboard Devices Configuration > VIA 1394 Controller > Enabled
• Advanced Settings > Onboard Devices Configuration > PCI Express X16_3 slot (black) bandwidth > Auto
• Advanced Settings > Onboard Devices Configuration > Marvell Storage Controller > AHCI Mode
• Advanced Settings > Onboard Devices Configuration > Marvell Storage OPROM > Disabled
• Advanced Settings > Onboard Devices Configuration > JMB Storage Controller > Enabled
• Advanced Settings > Onboard Devices Configuration > JMB Storage OPROM > Enabled
• Advanced Settings > Onboard Devices Configuration > Display OptionRom in POST > Enabled
• Advanced Settings > Onboard Devices Configuration > Asmedia USB 3.0 Controller > Enabled
• Advanced Settings > Onboard Devices Configuration > Asmedia USB 3.0 Battery Charging Support > Disabled
• Advanced Settings > Onboard Devices Configuration > Intel LAN Controller > Enabled
• Advanced Settings > Onboard Devices Configuration > Intel PXE OPROM > Disabled
• Advanced Settings > APM > Restore AC Power Loss > Power Off
• Advanced Settings > APM > Power On By PCI > Disabled
• Advanced Settings > APM > Power On By PCIE > Disabled
• Advanced Settings > APM > Power On By RTC > Disabled
• Monitor > CPU Q-Fan Control > Enabled
• Monitor > Chassis Q-Fan Control > Enabled

What works

• Keyboard & Trackpad
• Audio ALC892 (can change 4 outputs)
• VGA + HDMI (Dual monitor)
• LAN x2 Internal RealtekRTL8111
• USB 2.0
• USB 3.0 (Inertnal on motherboard) + 2 blue on back
• USB 3.1 +
• TurboBoost
• GPU Acceleration
• NVMe on AGP port (PCI-e)
• BCM4933 Native working wifi + bt (airdrop)

What doesn't work

• Bluetooth on motherboard

Post Install

• With Colover -> write EFI
• Copy files and decor it...
• I put new folder (After install) with other kexts, what I use
• Add SMBIOS, Serials and other stuff

BIOS

• BIOS update for support NVMe on PCI-e

After Update to 10.15.6

Probably you have kernel Panic and poker face :P

In message look on line where saying Kernel Extensions in backtrace: probably you have com.apple.driver.AppleAHCIPort panic

- reboot
- Use usb for boot or if EFI working boot recovery partition.
- Open terminal and go to you install disk

- see your disk partitions
- ~ df
- go to kext folder
- ~ /Volumes/<OSX>/Library/Extensions/
- ls -l
- look if you see something like panic message AppleAHCIPortHotplug.kext
- you can moved it to other folder or delete
- ~ rm AppleAHCIPortHotplug.kext
- now you need restore permissions
- ~ chmod -Rf 766 /Volumes/<OSX>/S*/L*/E*
- ~ chmod -Rf 766 /Volumes/<OSX>/L*/E*
- and now rebuild kext cache
- ~ kextcache -i /Volumes/<OSX>
- ~ reboot

Thats it! Finally boot normal, and use Hackintool