A Python 3 library for interacting with a CoolMasterNet HVAC bridge.
pip install pycoolmasternet
Or you can get the code from https://github.com/koreth/pycoolmasternet
from pycoolmasternet import CoolMasterNet
# Supply the IP address and optional port number (default 10102).
#
# By default, properties will be refreshed by querying the device
# if last refresh was more than 1 second ago; pass auto_update=False
# to disable that behavior (in which case you will need to call
# update_status() explicitly).
cool = CoolMasterNet('192.168.0.123', port=12345, auto_update=False)
# Returns a list of CoolMasterDevice objects
devices = cool.devices()
# Device's unit ID on the CoolMasterNet bridge, e.g., "L7.001"
device.uid
# Temperature unit: imperial, celsius
device.unit
# Current reading of device's thermometer
device.temperature
# Current setting of device's thermostat
device.thermostat
device.set_thermostat(28)
# True if device is turned on
device.is_on
device.turn_on()
device.turn_off()
# Fan speed: low, med, high
device.fan_speed
device.set_fan_speed('med')
# Mode of operation: auto, cool, dry, fan, heat
device.mode
device.set_mode('cool')
# Swing mode: horizontal, vertical, auto, 30, 45, 60, stop
# Numeric settings are degrees of louver tilt. On read, the property can
# be None if the bridge reports that the device doesn't support swing.
device.swing
device.set_swing('30')
# Dict with all the properties listed above
device.status
# Force refresh of status (by default, device auto-updates its status
# if most recent update is more than 1 second ago)
device.update_status()This code is released under the MIT license.