ROS2 Tello Driver

About The Project

ROS2 driver to control Tello drones based on Tello SDK 2.0. Features include: status and video stream, action server for processing commands (takeoff, land, etc), connect to wifi access points, and swarm control.

Getting Started

The driver has been tested on Ubuntu 22.04 with ROS2 Humble.

Prerequisites

• ROS2 Humble
• Numpy
• h264decoder (link to repo)

Installation

To install the Tello driver:

mkdir tello_ws && cd tello_ws
mkdir src && cd src
git clone https://github.com/kousheekc/ros2_tello_driver.git
cd ..
colcon build
source install/setup.bash

Usage

Run by connecting to drone access point

ros2 launch tello_driver single_launch.py

To change access point, first connect to the drone then modify the ssid and password in change_ap_launch.py in the tello_driver package, then run:

ros2 launch tello_driver change_ap_launch.py

To connect to the drone through your own access point, make sure your PC is connected to the access point, then run:

ros2 launch tello_driver ap_single_launch.py

To control a swarm of drones: (you can add more nodes to the launch file depending on the number of drones connected)

ros2 launch tello_driver ap_multiple_launch.py

Contact

Kousheek Chakraborty - kousheekc@gmail.com

Project Link: https://github.com/kousheekc/ros2_tello_driver.git