Upstream main #9
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
This is due to a change in Shake&Tune v3.0.0
ksummers92
added a commit
that referenced
this pull request
Jun 22, 2024
* Update install.sh * Added Fysetc Cheetah V2 to mcu_definitions * Change moonraker Klippain update manager * Create SKR Pico+Cheetah mcu_definitions * Added picobilicial mcu_definitions * Upstream main (#9) * Further parameterize nozzle brush variables * Update brush_center_offset.md * Fix default brush size * Added default values to nozzle_cleaning.cfg * Update Shake&Tune path This is due to a change in Shake&Tune v3.0.0 * fixed max_z bug in PARK macro * Update BTT_SKR_2.cfg to fix EXP1_4 typo (Frix-x#578) * Nozzle cleaning parameters update (Frix-x#569) * add built in adxl sensor from nitehawk sb board (Frix-x#602) * add: mcu Fystec Cheetah v3 (Frix-x#604) --------- Co-authored-by: Félix Boisselier <felix@fboisselier.fr> Co-authored-by: tsk-2222 <111063724+tsk-2222@users.noreply.github.com> Co-authored-by: dev-aphex <dev-aphex@users.noreply.github.com> Co-authored-by: Minims <github@minims.fr> --------- Co-authored-by: Félix Boisselier <felix@fboisselier.fr> Co-authored-by: tsk-2222 <111063724+tsk-2222@users.noreply.github.com> Co-authored-by: dev-aphex <dev-aphex@users.noreply.github.com> Co-authored-by: Minims <github@minims.fr>
ksummers92
added a commit
that referenced
this pull request
Jun 22, 2024
* check test * check mmu * test * check * check * check mmu startup * macros * macros * macros * printer.cfg update only for LGX Heavy for MMU * orbiter2.0 mmu * changes * MMU specific mcu config * readme * moonraker * update printer.cfg for mmu extruders sections * typo * moonraker * typo * readme update * typo * MMU_HOME * check for mmu synch with extruder in prime line and swap * add CHECK_GATES optional parameter in start_print * unload at end for mmu * new HHv2 extruder modifications. You must review extruder section of printer.cfg and run Happy-Hare/install.sh script!!! * typo * changes on boards templates * Add configuration for BTT SKR Pro v1.2 and use of BTT SKR Pico v1.0 as mmu controller * Update calibrate.cfg Update to accommodate use of MMU. * Update base.conf Removed update manager for Klippain from base.conf to put in moonraker.conf to be editable. * Update install.sh * Updated start_print macro to put mmu stuff in modules. Removed mmu toolhead loading from extruder heating because one may like to wait to load until later. Updated end_print macro to save mmu_ready variable to 0 after eject. * Accidentally put "else if" instead of "elif". * for develop HHv2 * Update start_print.cfg Change mmu ready variable to save in macro and call from macro instead of save variables. * Update end_print.cfg * Update start_print.cfg Put ready variable in _MODULE_MMU_READY in the right place. * Update start_print.cfg Capitalize False? * Another attempt to get mmu to load in start print. * merge develop into Happy_Hare * Remove MMU_PREP reference. * readme * typo * typo * typo * Update README.md * Update mmu.md * Update mmu.md * Update configuration.md * Update mmu.md * Update README.md * Update mmu.md * Update README.md * Update README.md * Update README.md * Update README.md * Update Tircown_ERCF_easy_brd.cfg * Update Fysetc_ERCF_ERB.cfg * Update Mellow_fly_ERCF.cfg * add servo and comments in skr_Mini_E3 mcu * add servo in template mcu for spider board * add xyz check in park macro * Update park.cfg typo * test for PARK macro * startup * add Spider 3.0 and EBB2209_Can_RP2040 boards into happy_hare * add BTT MMB CAN Board and simplification of mmu templates * test for park * info on extruder retraction in PARK macro * Update park.cfg * cancel park mod and changes for the mmu_error_check in start print * rename ercf to mmu in variables * btt rp2040 * remove completly ercf name in variable * test error check * check gate to True by default on variables.cfg * configuration.md * Update variables.cfg * changes to only check mmu initial tool * typos * mmu.md adds * mmu doc * add check for new/rename mmu variables in variables.cfg * doc * test * upload image * update mmu.md * update comment * startup * remove check tool * Work for loading filament only if need... * typo correction * typo * some messges improvement * typo * color test * first commit * for bypass * test with check all gates * bypass * start_detection * test * test * test * test * ok? * typo * Update startup.cfg * Update mmu.cfg * Update startup.cfg * test * test2 * print_start_detection not forced * test * test * test * test * test * info * start check1 * bypass doc * 2 * info * base.conf * New HHv2 Hardware * comment mcu * mmu doc update * changes in start_print.cfg for new vesion of HHv2 extruder * Typos * mmu doc * first test for mmu errors * config start_print * error * doc * load bypass * merge from * start print mod * use new print_start_detection * doc * typo * typo * typo * test * test * test3 * ok * Correction for typo errors and test some print_start MMU * Some adjustment + first try Spoolman * typo 1 * typo 2 * test * typo * typo2 * ok * canceled * typo correction * typo * little bug * minor bug + hidden mmu_check_state * add hiden mmu_check_state * test tool used * Tool_use check * prevent bug if check gate and gate marked empty in HH * simplification 1 * typo * changes in MMU start_print * error * error? * install script * install.sh * typo * fix errors without mmu * fix error without mmu * missing mmu * missing mmu * zut * temp * reverse changes * remove option to sync mmu extruder in gcode print_start * doc * remove Sync mmu extruder from option in start print gcode * typo * typo * info check * added Ocotpus Pro v1.1 template (Frix-x#349) * changes * always desactivate clog detection for primelin * change readme for correct beta branch * Fixed start_print to merge * Another fix * remove and rename * typo * Update install.sh * Added LDO Nitehawk toolhead board configuration * Update LDO Nitehawk pin names to match pin diagram. Added LDO Nitehawk toolhead mcu template * Fixed missing comma * Fixed erroneous - sign * Happy hare v2.5 merge (#8) * make Klippain compatible with HH v2.5 * start print for HH > v2.5 * move HHv2.5 init in _KLIPPAIN_MMU_INIT * add some info in mmu.md for 2.5 * add sync fonction with HH>2.5 * add eject slicer option for HH>2.5 * typo error * Update end_print.cfg Change EJECT to boolean for MMU_END * show HH version on startup * added custom4..9 in start_print (Frix-x#539) * updated beeper sections (Frix-x#549) by switching to pwm_cycle_time instead of output pin * removed M204 in favor of SET_VELOCITY_LIMIT (Frix-x#555) * support for LDO Picobilical (Frix-x#533) * removed M204 for SET_VELOCITY_LIMIT (Frix-x#554) * removed last M204 for SET_VELOCITY_LIMIT (Frix-x#553) * added Beacon accelerometer support (Frix-x#552) * deprecate HH<v2.5 and small typos * removed old artifacts from TMC2240 init feature Please use https://github.com/andrewmcgr/klipper_tmc_autotune instead! * error on changes in _INIT_CHECK_MMU --------- Co-authored-by: Benoitone <63300355+Benoitone@users.noreply.github.com> Co-authored-by: Félix Boisselier <felix@fboisselier.fr> Co-authored-by: Jan-Gerrit Drexhage <102791900+Surion79@users.noreply.github.com> Co-authored-by: Colten Edwards <cd.edwards@sasktel.net> Co-authored-by: Nick Danyluk <ndanyluk7@gmail.com> Co-authored-by: Svennixx <xsvenhd@hotmail.com> * Align hardware/mmu.cfg with upstream * Update nozzle brushing to accomodate offset for situations in which standard nozzle brushing parameters lead to undesired interactions. * Modify starting move prior to brush procedure to accomodate for brush_offset * Fix brush center calculation * Add some debugging messages * ??? * Fixed brush stroke maths * Removed unneccessary if statement * Attempt to merge main in HH (#12) * Update install.sh * Added Fysetc Cheetah V2 to mcu_definitions * Change moonraker Klippain update manager * Create SKR Pico+Cheetah mcu_definitions * Added picobilicial mcu_definitions * Upstream main (#9) * Further parameterize nozzle brush variables * Update brush_center_offset.md * Fix default brush size * Added default values to nozzle_cleaning.cfg * Update Shake&Tune path This is due to a change in Shake&Tune v3.0.0 * fixed max_z bug in PARK macro * Update BTT_SKR_2.cfg to fix EXP1_4 typo (Frix-x#578) * Nozzle cleaning parameters update (Frix-x#569) * add built in adxl sensor from nitehawk sb board (Frix-x#602) * add: mcu Fystec Cheetah v3 (Frix-x#604) --------- Co-authored-by: Félix Boisselier <felix@fboisselier.fr> Co-authored-by: tsk-2222 <111063724+tsk-2222@users.noreply.github.com> Co-authored-by: dev-aphex <dev-aphex@users.noreply.github.com> Co-authored-by: Minims <github@minims.fr> --------- Co-authored-by: Félix Boisselier <felix@fboisselier.fr> Co-authored-by: tsk-2222 <111063724+tsk-2222@users.noreply.github.com> Co-authored-by: dev-aphex <dev-aphex@users.noreply.github.com> Co-authored-by: Minims <github@minims.fr> --------- Co-authored-by: Benoitone <63300355+Benoitone@users.noreply.github.com> Co-authored-by: Benoitone <benoitonepub@gmail.com> Co-authored-by: Jan-Gerrit Drexhage <102791900+Surion79@users.noreply.github.com> Co-authored-by: Félix Boisselier <felix@fboisselier.fr> Co-authored-by: Colten Edwards <cd.edwards@sasktel.net> Co-authored-by: Nick Danyluk <ndanyluk7@gmail.com> Co-authored-by: Svennixx <xsvenhd@hotmail.com> Co-authored-by: tsk-2222 <111063724+tsk-2222@users.noreply.github.com> Co-authored-by: dev-aphex <dev-aphex@users.noreply.github.com> Co-authored-by: Minims <github@minims.fr>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
No description provided.