release: 1.6.0

CHANGELOG.md

@@ -1,17 +1,19 @@
 # CHANGELOG
 
-## 1.6.0 -- TODO
+## 1.6.0 -- 2021/01/04
 
 ### New Feature
 * Basic support for custom VPC
 * DualStack support
 * Overlay to underlay gateway through BGP
 * Support binding pod to subnet
+* Support distributed eip
 * Support disable interconnection for specific subnet
 * Iface now support regex
 * `install.sh` supports DPDK resource configuration
 * Remove cluster ip dependency for ovn/ovs components
 * Change base image to ubuntu
+* Update OVN to 20.09
 
 ### Monitoring
 * Add OVN/OVS monitor
@@ -34,6 +36,7 @@
 * Tolerate all taints
 * OVN/OVS log rotation
 * Update Go to 1.15
+* Multi arch image
 
 ### Bugfix
 * Remove not alive pod in networkpolicy portGroup
@@ -60,6 +63,8 @@
 * OVN-IC support SSL
 * Pod static ip validation
 * Multiple rule networkpolicy issues
+* Modify service vip parse error
+* CNIServer default encap ip use node ip
 
 ## 1.5.2 -- 2020/12/01
 

dist/images/generate-ssl-docker.sh

@@ -2,7 +2,7 @@
 set -euo pipefail
 exist=$(kubectl get secret -n kube-system kube-ovn-tls --ignore-not-found)
 if [[ $exist == "" ]];then
-  docker run --rm -v $PWD:/etc/ovn kubeovn/kube-ovn:v1.5.0 bash generate-ssl.sh
+  docker run --rm -v $PWD:/etc/ovn kubeovn/kube-ovn:v1.6.0 bash generate-ssl.sh
   kubectl create secret generic -n kube-system kube-ovn-tls --from-file=cacert=cacert.pem --from-file=cert=ovn-cert.pem --from-file=key=ovn-privkey.pem
   rm -rf cacert.pem ovn-cert.pem ovn-privkey.pem ovn-req.pem
 fi

dist/images/ovn-ic-db-docker.sh

@@ -1 +1 @@
-docker run -d --network=host -v /etc/ovn/:/etc/ovn -v /var/run/ovn:/var/run/ovn -v /var/log/ovn:/var/log/ovn kubeovn/kube-ovn:v1.5.0 bash start-ic-db.sh
+docker run -d --network=host -v /etc/ovn/:/etc/ovn -v /var/run/ovn:/var/run/ovn -v /var/log/ovn:/var/log/ovn kubeovn/kube-ovn:v1.6.0 bash start-ic-db.sh

docs/cluster-interconnection.md

@@ -13,7 +13,7 @@ only L3 connectivity for gateway nodes is required.
 ## Auto Route Step
 1. Run Interconnection Controller in a region that can be accessed by other cluster
 ```bash
-docker run --name=ovn-ic-db -d --network=host -v /etc/ovn/:/etc/ovn -v /var/run/ovn:/var/run/ovn -v /var/log/ovn:/var/log/ovn kubeovn/kube-ovn:v1.5.2 bash start-ic-db.sh
+docker run --name=ovn-ic-db -d --network=host -v /etc/ovn/:/etc/ovn -v /var/run/ovn:/var/run/ovn -v /var/log/ovn:/var/log/ovn kubeovn/kube-ovn:v1.6.0 bash start-ic-db.sh
 ```
 2. Create `ovn-ic-config` ConfigMap in each cluster `kube-system` namespace. Edit and apply the yaml below in each cluster.
 ```yaml
@@ -85,7 +85,7 @@ For manually adding routes, you need to find the
 ## Manually Route Step
 1. Same as AutoRoute step 1,run Interconnection Controller in a region that can be accessed by other cluster
 ```bash
-docker run --name=ovn-ic-db -d --network=host -v /etc/ovn/:/etc/ovn -v /var/run/ovn:/var/run/ovn -v /var/log/ovn:/var/log/ovn kubeovn/kube-ovn:v1.5.2 bash start-ic-db.sh
+docker run --name=ovn-ic-db -d --network=host -v /etc/ovn/:/etc/ovn -v /var/run/ovn:/var/run/ovn -v /var/log/ovn:/var/log/ovn kubeovn/kube-ovn:v1.6.0 bash start-ic-db.sh
 ```
 2. Create `ic-config` ConfigMap in each cluster. Edit and apply the yaml below in each cluster. Note that `auto-route` is set to `false`
 ```yaml

docs/dpdk.md

@@ -62,7 +62,7 @@ dpdk-hugepage-dir=/dev/hugepages
 ## To Install
 
 1. Download the installation script:
-`wget https://raw.githubusercontent.com/alauda/kube-ovn/release-1.5/dist/images/install.sh`
+`wget https://raw.githubusercontent.com/alauda/kube-ovn/release-1.6/dist/images/install.sh`
 
 2. Use vim to edit the script variables to meet your requirement
 ```bash

docs/high-available.md

@@ -8,7 +8,7 @@ Change the replicas to 3, and add NODE_IPS environment var points to node that h
       replicas: 3
       containers:
         - name: ovn-central
-          image: "kubeovn/kube-ovn:v1.5.2"
+          image: "kubeovn/kube-ovn:v1.6.0"
           imagePullPolicy: Always
           env:
             - name: POD_IP

docs/install.md

@@ -24,10 +24,10 @@ Kube-OVN provides a one script install to easily install a high-available, produ
 1. Download the stable release installer scripts
 
 For Kubernetes version>=1.16
-`wget https://raw.githubusercontent.com/alauda/kube-ovn/release-1.5/dist/images/install.sh`
+`wget https://raw.githubusercontent.com/alauda/kube-ovn/release-1.6/dist/images/install.sh`
 
 For Kubernetes version<1.16
-`wget https://raw.githubusercontent.com/alauda/kube-ovn/release-1.5/dist/images/install-pre-1.16.sh`
+`wget https://raw.githubusercontent.com/alauda/kube-ovn/release-1.6/dist/images/install-pre-1.16.sh`
 
 If you want to try the latest developing Kube-OVN, try the script below
 `wget https://raw.githubusercontent.com/alauda/kube-ovn/master/dist/images/install.sh`
@@ -40,7 +40,7 @@ If you want to try the latest developing Kube-OVN, try the script below
  JOIN_CIDR="100.64.0.0/16"              # Do NOT overlap with NODE/POD/SVC CIDR
  LABEL="node-role.kubernetes.io/master" # The node label to deploy OVN DB
  IFACE=""                               # The nic to support container network can be a nic name or a group of regex separated by comma, if empty will use the nic that the default route use
- VERSION="v1.5.2"
+ VERSION="v1.6.0"
 ```
 
 After v1.6.0 `IFACE` support regex, e.g. `IFACE=enp6s0f0,eth.*`
@@ -62,19 +62,19 @@ For Kubernetes version before 1.17 please use the following command to add the n
     `kubectl label node <Node on which to deploy OVN DB> kube-ovn/role=master`
 2. Install Kube-OVN related CRDs
 
-    `kubectl apply -f https://raw.githubusercontent.com/alauda/kube-ovn/release-1.5/yamls/crd.yaml`
+    `kubectl apply -f https://raw.githubusercontent.com/alauda/kube-ovn/release-1.6/yamls/crd.yaml`
 3. Install native OVS and OVN components:
 
-    `kubectl apply -f https://raw.githubusercontent.com/alauda/kube-ovn/release-1.5/yamls/ovn.yaml`
+    `kubectl apply -f https://raw.githubusercontent.com/alauda/kube-ovn/release-1.6/yamls/ovn.yaml`
 4. Install the Kube-OVN Controller and CNI plugins:
 
-    `kubectl apply -f https://raw.githubusercontent.com/alauda/kube-ovn/release-1.5/yamls/kube-ovn.yaml`
+    `kubectl apply -f https://raw.githubusercontent.com/alauda/kube-ovn/release-1.6/yamls/kube-ovn.yaml`
 
 That's all! You can now create some pods and test connectivity.
 
 For high-available ovn db, see [high available](high-available.md)
 
-If you want to enable IPv6 on default subnet and node subnet, please apply https://raw.githubusercontent.com/alauda/kube-ovn/release-1.5/yamls/kube-ovn-ipv6.yaml on Step 3.
+If you want to enable IPv6 on default subnet and node subnet, please apply https://raw.githubusercontent.com/alauda/kube-ovn/release-1.6/yamls/kube-ovn-ipv6.yaml on Step 3.
 
 ## More Configuration
 
@@ -158,7 +158,7 @@ You can use `--default-cidr` flags below to config default Pod CIDR or create a
 1. Remove Kubernetes resources:
 
     ```bash
-    wget https://raw.githubusercontent.com/alauda/kube-ovn/release-1.5/dist/images/cleanup.sh
+    wget https://raw.githubusercontent.com/alauda/kube-ovn/release-1.6/dist/images/cleanup.sh
     bash cleanup.sh
     ```
 

docs/ipv6.md

@@ -2,4 +2,4 @@
 
 Through Kube-OVN does support both protocol subnets coexist in a cluster, Kubernetes control plan now only support one protocol. So you will lost some ability like probe and  service discovery if you use a protocol other than the kubernetes control plan. We recommend you use only one same ip protocol that same with kubernetes control plan.
 
-To enable IPv6 support you need to modify the installation yaml to specify the default subnet and node subnet cidrBlock and gateway with a ipv6 format. You can apply this [v6 version yaml](https://raw.githubusercontent.com/alauda/kube-ovn/release-1.5/yamls/kube-ovn-ipv6.yaml) at [installation step 3](install.md#to-install) for a quick start.
+To enable IPv6 support you need to modify the installation yaml to specify the default subnet and node subnet cidrBlock and gateway with a ipv6 format. You can apply this [v6 version yaml](https://raw.githubusercontent.com/alauda/kube-ovn/release-1.6/yamls/kube-ovn-ipv6.yaml) at [installation step 3](install.md#to-install) for a quick start.

docs/vlan.md

@@ -14,7 +14,7 @@ We are working at combine two networks in one cluster.
 
 1. Get the installation script
 
-`wget https://raw.githubusercontent.com/alauda/kube-ovn/release-1.5/dist/images/install.sh`
+`wget https://raw.githubusercontent.com/alauda/kube-ovn/release-1.6/dist/images/install.sh`
 
 2. Edit the `install.sh`, modify `NETWORK_TYPE` to `vlan`, `VLAN_INTERFACE_NAME` to related host interface.
 

yamls/kube-ovn-ipv6.yaml

@@ -38,7 +38,7 @@ spec:
       hostNetwork: true
       containers:
         - name: kube-ovn-controller
-          image: "kubeovn/kube-ovn:v1.5.2"
+          image: "kubeovn/kube-ovn:v1.6.0"
           imagePullPolicy: IfNotPresent
           command:
             - /kube-ovn/start-controller.sh
@@ -117,7 +117,7 @@ spec:
       hostPID: true
       initContainers:
         - name: install-cni
-          image: "kubeovn/kube-ovn:v1.5.2"
+          image: "kubeovn/kube-ovn:v1.6.0"
           imagePullPolicy: IfNotPresent
           command: ["/kube-ovn/install-cni.sh"]
           securityContext:
@@ -128,7 +128,7 @@ spec:
               name: cni-bin
       containers:
         - name: cni-server
-          image: "kubeovn/kube-ovn:v1.5.2"
+          image: "kubeovn/kube-ovn:v1.6.0"
           imagePullPolicy: IfNotPresent
           command:
             - bash
@@ -231,7 +231,7 @@ spec:
       hostPID: true
       containers:
         - name: pinger
-          image: "kubeovn/kube-ovn:v1.5.2"
+          image: "kubeovn/kube-ovn:v1.6.0"
           command: ["/kube-ovn/kube-ovn-pinger", "--external-address=114.114.114.114", "--external-dns=alauda.cn"]
           imagePullPolicy: IfNotPresent
           securityContext:

yamls/kube-ovn.yaml

@@ -38,7 +38,7 @@ spec:
       hostNetwork: true
       containers:
         - name: kube-ovn-controller
-          image: "kubeovn/kube-ovn:v1.5.2"
+          image: "kubeovn/kube-ovn:v1.6.0"
           imagePullPolicy: IfNotPresent
           command:
             - /kube-ovn/start-controller.sh
@@ -126,7 +126,7 @@ spec:
       hostPID: true
       initContainers:
         - name: install-cni
-          image: "kubeovn/kube-ovn:v1.5.2"
+          image: "kubeovn/kube-ovn:v1.6.0"
           imagePullPolicy: IfNotPresent
           command: ["/kube-ovn/install-cni.sh"]
           securityContext:
@@ -137,7 +137,7 @@ spec:
               name: cni-bin
       containers:
         - name: cni-server
-          image: "kubeovn/kube-ovn:v1.5.2"
+          image: "kubeovn/kube-ovn:v1.6.0"
           imagePullPolicy: IfNotPresent
           command:
             - bash
@@ -247,7 +247,7 @@ spec:
       hostPID: true
       containers:
         - name: pinger
-          image: "kubeovn/kube-ovn:v1.5.2"
+          image: "kubeovn/kube-ovn:v1.6.0"
           command: ["/kube-ovn/kube-ovn-pinger", "--external-address=114.114.114.114", "--external-dns=alauda.cn"]
           imagePullPolicy: IfNotPresent
           securityContext:

yamls/ovn-ha.yaml

@@ -187,7 +187,7 @@ spec:
       hostNetwork: true
       containers:
         - name: ovn-central
-          image: "kubeovn/kube-ovn:v1.5.2"
+          image: "kubeovn/kube-ovn:v1.6.0"
           imagePullPolicy: IfNotPresent
           command: ["/kube-ovn/start-db.sh"]
           securityContext:
@@ -310,7 +310,7 @@ spec:
       hostPID: true
       containers:
         - name: openvswitch
-          image: "kubeovn/kube-ovn:v1.5.2"
+          image: "kubeovn/kube-ovn:v1.6.0"
           imagePullPolicy: IfNotPresent
           command: ["/kube-ovn/start-ovs.sh"]
           securityContext:

yamls/ovn.yaml

@@ -204,7 +204,7 @@ spec:
       shareProcessNamespace: true
       containers:
         - name: ovn-central
-          image: "kubeovn/kube-ovn:v1.5.2"
+          image: "kubeovn/kube-ovn:v1.6.0"
           imagePullPolicy: IfNotPresent
           command: ["/kube-ovn/start-db.sh"]
           securityContext:
@@ -389,7 +389,7 @@ spec:
       hostPID: true
       containers:
         - name: openvswitch
-          image: "kubeovn/kube-ovn:v1.5.2"
+          image: "kubeovn/kube-ovn:v1.6.0"
           imagePullPolicy: IfNotPresent
           command: ["/kube-ovn/start-ovs.sh"]
           securityContext: