Skip to content

Conducted a Design of Experiments (DOE) study to evaluate the effects of infill percentage (density) and print speed on the tensile strength of 3D-printed poly lactic acid (PLA) components

Notifications You must be signed in to change notification settings

kulkarnipreetam/design_of_experiments_project

Repository files navigation

Important Notice

The code in this repository is proprietary and protected by copyright law. Unauthorized copying, distribution, or use of this code is strictly prohibited. By accessing this repository, you agree to the following terms:

  • Do Not Copy: You are not permitted to copy any part of this code for any purpose.
  • Do Not Distribute: You are not permitted to distribute this code, in whole or in part, to any third party.
  • Do Not Use: You are not permitted to use this code, in whole or in part, for any purpose without explicit permission from the owner.

Any violation of these terms will be subject to legal action. If you have any questions or require permission, please contact the repository owner.

Thank you for your cooperation.

About

Conducted a Design of Experiments (DOE) study to evaluate the effects of infill percentage (density) and print speed on the tensile strength of 3D-printed poly lactic acid (PLA) components

Resources

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages