2.1.2.1 My Configurations (DOESN’T WORK)

Updated my Tevo Tarantula Pro 3D Printer with my Marlin Firmware settings through the files:

• Configuration.h
• Configuration_adv.h
• _Bootscreen.h
• _Statusscreen.h

I kept the table configuration from the previous version. The goal was just to update the firmware.

🚨 Doesn’t work 🚨

I discovered a problem with the printer's extruder during a print:

• For some reason the extruder motor stops extruding in the middle of printing, I thought it was a mechanical problem, but when I downgraded from the previous version, it started working normally again.
• The extruder motor was disabled during printing, it was possible to move it manually through the extruder's external gear.

I did some research to see if anyone else had a similar problem, but I think it's still an unsolved bug at the moment, meanwhile I'll be using the LTS version of the firmware.

⚠️ All settings were made for the Tarantula Pro printer with my modifications, check your printer's compatibility first.

2.1.1 My Configurations

Updated my Tevo Tarantula Pro 3D Printer with my Marlin Firmware settings through the files:

• Configuration.h
• Configuration_adv.h
• _Bootscreen.h
• _Statusscreen.h

⚠️ All settings were made for the Tarantula Pro printer with my modifications, check your printer's compatibility first.