Add run-live-gui target to run monitor container

- monitor app is run only on physical monitor so we need to run QEMU
  with -vga or similar to see it

Signed-off-by: Mikhail Malyshev <mike.malyshev@gmail.com>

Makefile

@@ -252,16 +252,19 @@ QEMU_OPTS_TPM=$(QEMU_OPTS_TPM_$(TPM:%=Y)_$(ZARCH))
 QEMU_OPTS_amd64=-smbios type=1,serial=$(QEMU_EVE_SERIAL)
 QEMU_OPTS_arm64=-smbios type=1,serial=$(QEMU_EVE_SERIAL) -drive file=fat:rw:$(dir $(DEVICETREE_DTB)),label=QEMU_DTB,format=vvfat
 QEMU_OPTS_riscv64=-kernel $(UBOOT_IMG)/u-boot.bin -device virtio-blk,drive=uefi-disk
-QEMU_OPTS_COMMON= -m $(QEMU_MEMORY) -smp 4 -display none $(QEMU_OPTS_BIOS) \
+QEMU_OPTS_NO_DISPLAY=-display none
+QEMU_OPTS_VGA_DISPLAY=-vga std
+QEMU_OPTS_COMMON= -m $(QEMU_MEMORY) -smp 4  $(QEMU_OPTS_BIOS) \
         -serial mon:stdio      \
-	-global ICH9-LPC.noreboot=false -watchdog-action reset \
+        -global ICH9-LPC.noreboot=false -watchdog-action reset \
         -rtc base=utc,clock=rt \
         -netdev user,id=eth0,net=$(QEMU_OPTS_NET1),dhcpstart=$(QEMU_OPTS_NET1_FIRST_IP),hostfwd=tcp::$(SSH_PORT)-:22$(QEMU_TFTP_OPTS) -device virtio-net-pci,netdev=eth0,romfile="" \
         -netdev user,id=eth1,net=$(QEMU_OPTS_NET2),dhcpstart=$(QEMU_OPTS_NET2_FIRST_IP) -device virtio-net-pci,netdev=eth1,romfile="" \
         -device nec-usb-xhci,id=xhci \
         -qmp unix:$(CURDIR)/qmp.sock,server,wait=off
 QEMU_OPTS_CONF_PART=$(shell [ -d "$(CONF_PART)" ] && echo '-drive file=fat:rw:$(CONF_PART),format=raw')
-QEMU_OPTS=$(QEMU_OPTS_COMMON) $(QEMU_ACCEL) $(QEMU_OPTS_$(ZARCH)) $(QEMU_OPTS_CONF_PART) $(QEMU_OPTS_TPM)
+QEMU_OPTS=$(QEMU_OPTS_NO_DISPLAY) $(QEMU_OPTS_COMMON) $(QEMU_ACCEL) $(QEMU_OPTS_$(ZARCH)) $(QEMU_OPTS_CONF_PART) $(QEMU_OPTS_TPM)
+QEMU_OPTS_GUI=$(QEMU_OPTS_VGA_DISPLAY) $(QEMU_OPTS_COMMON) $(QEMU_ACCEL) $(QEMU_OPTS_$(ZARCH)) $(QEMU_OPTS_CONF_PART) $(QEMU_OPTS_TPM)
 # -device virtio-blk-device,drive=image -drive if=none,id=image,file=X
 # -device virtio-net-device,netdev=user0 -netdev user,id=user0,hostfwd=tcp::1234-:22
 
@@ -566,6 +569,8 @@ run-installer-net: $(BIOS_IMG) $(IPXE_IMG) $(DEVICETREE_DTB) $(SWTPM) GETTY
 # run MUST NOT change the current dir; it depends on the output being correct from a previous build
 run-live run: $(BIOS_IMG) $(DEVICETREE_DTB) $(SWTPM) GETTY
 	$(QEMU_SYSTEM) $(QEMU_OPTS) -drive file=$(CURRENT_IMG),format=$(IMG_FORMAT),id=uefi-disk
+run-live-gui run: $(BIOS_IMG) $(DEVICETREE_DTB) $(SWTPM) GETTY
+	$(QEMU_SYSTEM) $(QEMU_OPTS_GUI) -drive file=$(CURRENT_IMG),format=$(IMG_FORMAT),id=uefi-disk
 
 run-target: $(BIOS_IMG) $(DEVICETREE_DTB) $(SWTPM) GETTY
 	$(QEMU_SYSTEM) $(QEMU_OPTS) -drive file=$(TARGET_IMG),format=$(IMG_FORMAT)