tensorflow_cc v2.0

Maintainer: Luigi Freda

• tensorflow_cc v2.0
  • 1. Install
    • 1.1. System configuration
      • 1.1.1. Install CUDA, CUDNN, TensorRT
    • 1.2. Clone this repository
    • 1.3. Configuration
    • 1.4. Build and install
    • 1.5. Free disk space Optional
  • 2. Usage
  • 3. Docker
  • 4. Some final notes and some tested working configurations
  • 5. Credits

This project allows to build and easily access (via cmake) the TensorFlow C++ API. In particular, after having built and deployed your new tensor_cc library, you won't need Bazel build system anymore (if you wish).

This project started as a fork of the repository https://github.com/FloopCZ/tensorflow_cc. After having hit and solved some build and deployment issues (especially with newer tensorflow configurations), I am sharing the updated and improved version of the scripts I obtained.

This repository contains two CMake projects.

• The tensorflow_cc project that downloads, builds and installs the TensorFlow C++ API into the operating system.
• The example project that demonstrates its simple usage.

---

Install

The following procedure has been tested under Ubuntu 20.04.

System configuration

IMPORTANT: before starting the install process, you need to check the tensorflow GPU compatibility table. Select your preferred configuration from the tested ones reported in the table.

• With CPU: https://www.tensorflow.org/install/source#cpu
• With GPU: https://www.tensorflow.org/install/source#gpu

My current preferred working configuration (default one) under Ubuntu 20.04:

• C++: 17
• TENSORFLOW_VERSION: 2.9.0
• BAZEL_VERSION: 5.1.1
• CUDA: 11.6
• CUDNN: 8.6.0.163-1+cuda11.8
  • sudo apt install -y libcudnn8=8.6.0.163-1+cuda11.8
  • sudo apt install -y libcudnn8-dev=8.6.0.163-1+cuda11.8

I successfully built/deployed/tested other newer tensorflow configurations by using the new updated scripts/configurations (see the list below).

Install CUDA, CUDNN, TensorRT

If you want to allow tensorflow_cc to use your GPU, start by checking you have properly installed the CUDA, CUDNN, TensorRT versions of the target configuration you selected in the table.

• CUDA: https://docs.nvidia.com/cuda/cuda-installation-guide-linux/index.html
• cudnn: https://docs.nvidia.com/deeplearning/cudnn/latest/installation/linux.html
• TensorRT: https://docs.nvidia.com/deeplearning/tensorrt/install-guide/index.html

Clone this repository

git clone https://github.com/luigifreda/tensorflow_cc.git
cd tensorflow_cc

Configuration

Check the tensorflow GPU compatibility table, select your preferred configuration from the tested ones, and then accordingly

1. Set your installed CUDA version in the script build.sh.
2. Set the target tensorflow and bazel versions in the following files (in the root folder):
   • BAZEL_VERSION
   • TENSORFLOW_VERSION
3. Set your target INSTALL_PATH in build.sh.

Build and install

Once you have properly set the build configuration, run

$ ./build.sh 

Warning: The build will take a long while (more than 2 hours).

Warning: Optimizations for Intel CPU are obtained by running export CC_OPT_FLAGS="-march=native" before the build. This command provides the best possible optimizations for your current CPU generation, but it may cause the built library to be incompatible with other machines (if you want to deploy it elsewhere).

Warning: In low-memory or many-cpu environments, the bazel scheduler can miss the resource consumption estimates and the build may be terminated by the out-of-memory killer. If that is your case, consider adding resource limit parameters to CMake, e.g., cmake -DLOCAL_RAM_RESOURCES=2048 -DLOCAL_CPU_RESOURCES=4 ..

Free disk space (Optional)

After you have build and deployed your Tensorflow C++ library, you may want to clean up the build artifacts.

# cleanup bazel build directory
rm -rf ~/.cache
# remove the build folder
cd .. && rm -rf build

---

Usage

The example project demonstrates the simple usage of tensorflow_cc.

In order to build and run the example program:

cd example
mkdir build && cd build
cmake .. && make
./example 

---

Docker

At present, I didn't test the new scripts under docker yet. If you wish, you may want to take a look at this repo and its docker image shared under Docker hub.

---

Some final notes and some tested working configurations

With respect to the original repo, one of the most important changes is the removal of the bazel option --config=monolithic since it brings some troubles. In particular, I removed this option from the file tensorflow_cc/cmake/build_tensorflow.sh.in, which is used by cmake to generate the final configure and build script tensorflow_cc/build/build_tensorflow.sh.

I successfully built and deployed other newer tensorflow configurations (see the list below). However, note that tensorflow does download and use its own custom versions of Eigen (and of other base libraries, according to the selected tensorflow version) and the used library versions may not be the same ones that are installed in your system. This fact may cause severe problems (undefined behaviors and uncontrolled crashes) in your final target projects (where you import the built and deployed Tensorflow C++): In fact, you may be mixing libraries built with different versions of Eigen (so with different data alignments)!

Some tested working tensorflow configurations:

• tensorflow 2.9.0, bazel 5.1.1, cudnn 8.6.0, cuda 11.6
• tensorflow 2.13.0, bazel 5.3.0, cudnn 8.6.0, cuda 11.8
• tensorflow 2.14.0, bazel 6.1.0, cudnn 8.9.7, cuda 11.8

---

Credits

Thanks to FlooCZ for his initial version of the tensorflow_cc repo.