This is a GitHub repository intended to act as a template for an open source assistive technology device. It is meant to contain all design files, build files, and documentation for the project. More information about how to use the template is available in the Documentation_Guide. You can see examples of other Open AT Devices at the Makers Making Change website.
The is an assistive technology widget that makes it easier to document Open-Source Assistive Technology devices.
It is intended for use by makers.
The device is comprised of off-the-shelf electronics and 3D printed parts.
The overall cost of materials is about $ (plus $ for component shipping).
This is an open-source assistive technology, so anyone is free to build it. All of the files and instructions required to build the device are contained within this repository. Refer to the Maker Guide below.
You may also submit a build request through the Makers Making Change Assistive Device Library Listing to have a volunteer maker build the device. As the requestor, you are responsible for reimbursing the maker for the cost of materials and any shipping.
If you have the skills and equipment to build this device, and would like to donate your time to create the device for someone who needs it, visit the MMC Maker Wanted section.
The Maker Guide contains all the necessary information to build this device, including tool lists, assembly instructions, programming instructions (if applicable) and testing.
The Bill of Materials lists all of the parts and components required to build the device.
All of the files and individual print files can be in the /Build_Files/3D_Printing_Files folder.
Reference the Assembly Guide for the tools and steps required to build each portion.
As open source assistive technology, you are welcomed and encouraged to improve upon the design.
| Document | Version | Link |
|---|---|---|
| Design Rationale | 1.0 | _Design_Rationale |
| Maker Guide | 1.0 | _Maker_Checklist |
| Bill of Materials | 1.0 | _Bill_of_Materials |
| User Guide | 1.0 | _User_Guide |
| Changelog | 1.0 | Changelog |
The device was designed by .
The documentation template was created by Makers Making Change / Neil Squire Society and is used under a CC BY-SA 4.0 license. It is available at the following link: https://github.com/makersmakingchange/OpenAT-Template
Designers:
- Designer 1
- Designer 2
Copyright (c) YYYY .
This repository describes Open Hardware:
- Everything needed or used to design, make, test, or prepare the is licensed under the CERN 2.0 Weakly Reciprocal license (CERN-OHL-W v2) or later .
- All software is under the GNU General Public License v3.0 (GPL-3.0).
- Accompanying material such as instruction manuals, videos, and other copyrightable works that are useful but not necessary to design, make, test, or prepare the are published under a Creative Commons Attribution-ShareAlike 4.0 license (CC BY-SA 4.0) .
You may redistribute and modify this documentation and make products using it under the terms of the CERN-OHL-W v2. This documentation is distributed WITHOUT ANY EXPRESS OR IMPLIED WARRANTY, INCLUDING OF MERCHANTABILITY, SATISFACTORY QUALITY AND FITNESS FOR A PARTICULAR PURPOSE. Please see the CERN-OHL-W v2 for applicable conditions.
Source Location: <Repository_Link>
Makers Making Change is a program of Neil Squire, a Canadian non-profit that uses technology, knowledge, and passion to empower people with disabilities.
Makers Making Change leverages the capacity of community based Makers, Disability Professionals and Volunteers to develop and deliver affordable Open Source Assistive Technologies.
- Website: www.MakersMakingChange.com
- GitHub: makersmakingchange
- X (formerly Twitter): @makermakechange
- Instagram: @makersmakingchange
- Facebook: makersmakechange
- LinkedIn: Neil Squire Society
- Thingiverse: makersmakingchange
- Printables: MakersMakingChange
For technical questions, to get involved, or to share your experience we encourage you to visit our website or contact us.