Case for Greaseweazle v4 and 3.5" floppy drive by hadessuk.
Knurled brass threaded inserts:
- 8 x M3x5 (for the case)
- 4 x M2x5 (for the Greaseweazle)
Bolts:
- 8 x M3x10 hex (for the case)
- 4 x M2x4 hex (for the Greaseweazle)
- 4 x M3x5 Phillips (to mount drive)
To complete the device, you will also need a working 3.5" drive, a floppy drive ribbon cable, and either jumper cables or a cable with a Berg connector, and a Greaseweazle v4.
This case requires the drive to be powered by the Greaseweazle, and makes no accommodation for drives that require too much power or 12V.
STL files are available on Printables.com.
You can also generate them on Unix systems if openscad is in your PATH by running make.
2 different set of models exist.
- the simplest are the
big-*files. One model for the top and one model for the bottom of the drive case. This requires a printer that can print at least 22cm x 14cm. - the more complicated
small-*models use 2 parts for the bottom case, and 3 parts for the top case. The top case is split in 3 and can be printed in different materials to give it that striped look. This requires a 15cm x 15cm printer.
If your printer is big enough, you can of course use the single bottom plate with the "small" top case models. The back and front of the small variant of the top case can usually be printed, sequentially, in one sitting, even on a small printer.
- The "small" top case flexes a bit too much and could do with having a lip that prevents this.
- The holes for mounting the Greaseweazle are a bit too unforgiving when brass inserts are mounted.
- The USB port hole could be moved left to accommodate shorter ribbon cables.
- The holes in the bottom case are ever so slightly too tight for common hex head screws.
Based on Greaseweazle F7 Lightning Plus case by n13ldo, itself based on Case for Greaseweazle F7 and 3.5" floppy drive by ali1234.
Licensed under CC BY 4.0.