Added pin definitions for Heltec WiFi LoRa32 V2

.github/workflows/CI.yml

@@ -20,6 +20,7 @@ jobs:
           #- esp32:esp32:ttgo-lora32:Revision=TTGO_LoRa32_V2
           - esp32:esp32:ttgo-lora32:Revision=TTGO_LoRa32_v21new
           - esp32:esp32:heltec_wireless_stick:PSRAM=disabled
+          - esp32:esp32:heltec_wifi_lora_32_V2
           - esp32:esp32:adafruit_feather_esp32s2
           - esp32:esp32:featheresp32
           - esp8266:esp8266:generic:dbg=Disabled

README.md

@@ -42,7 +42,8 @@ If this is not what you need, you have to switch to **Manual Configuration**
    | [LILYGO®TTGO-LORA32 V1](https://github.com/Xinyuan-LilyGo/TTGO-LoRa-Series) | "TTGO LoRa32-OLED" | "TTGO LoRa32 V1 (No TFCard)" | ARDUINO_TTGO_LORA32_V1 | SX1276 (HPD13A) | -   |
    | [LILYGO®TTGO-LORA32 V2](https://github.com/LilyGO/TTGO-LORA32) | "TTGO LoRa32-OLED" | "TTGO LoRa32 V2"             | ARDUINO_TTGO_LoRa32_V2 | SX1276 (HPD13A) | Wire DIO1 to GPIO33 |
    | [LILYGO®TTGO-LORA32 V2.1](http://www.lilygo.cn/prod_view.aspx?TypeId=50060&Id=1271&FId=t3:50060:3) | "TTGO LoRa32-OLED" | "TTGO LoRa32 V2.1 (1.6.1)" | ARDUINO_TTGO_LoRa32_v21new |  SX1276 (HPD13A) | - |
-   | [Heltec Wireless Stick](https://heltec.org/project/wireless-stick/)      | "Heltec Wireless Stick" | n.a.                       | ARDUINO_heltec_wireless_stick     | SX1276 | - |
+   | [Heltec Wireless Stick](https://heltec.org/project/wireless-stick/) | "Heltec Wireless Stick"   | n.a.             | ARDUINO_heltec_wireless_stick  | SX1276 | - |
+   | [Heltec WiFi LoRa 32 V2](https://heltec.org/project/wifi-lora-32/)  | "Heltec WiFi LoRa 32(V2)" | n.a.             | ARDUINO_heltec_wifi_lora_32_V2 | SX1276 | - |
    | [Adafruit Feather ESP32S2 with Adafruit LoRa Radio FeatherWing](https://github.com/matthias-bs/BresserWeatherSensorReceiver#adafruit-feather-esp32s2-with-adafruit-lora-radio-featherwing)                                | "Adafruit Feather ESP32-S2" | n.a.               | ARDUINO_ADAFRUIT_FEATHER_ESP32S2   | SX1276 (RFM95W) | Wiring on the Featherwing:<br>E to IRQ<br>D to CS<br>C to RST<br>A to DI01 |
    | [Adafruit Feather ESP32 or ThingPulse ePulse Feather with Adafruit LoRa Radio FeatherWing](https://github.com/matthias-bs/BresserWeatherSensorReceiver/blob/main/README.md#adafruit-feather-esp32-or-thingpulse-epulse-feather-with-adafruit-lora-radio-featherwing)                                | "Adafruit ESP32 Feather" | n.a.               | ARDUINO_FEATHER_ESP32   | SX1276 (RFM95W) | Wiring on the Featherwing:<br>A to RST<br>B to DIO1<br>D to IRQ<br>E to CS |
  | [DFRobot FireBeetle with FireBeetle Cover LoRa Radio 868MHz](https://github.com/matthias-bs/BresserWeatherSensorReceiver/blob/main/README.md#dfrobot-firebeetle-esp32-with-firebeetle-cover-lora-radio-868mhz)                               | "FireBeetle-ESP32" | n.a.               | ARDUINO_ESP32_DEV & **FIREBEETLE_ESP32_COVER_LORA**<sup>1</sup>   | SX1276 (LoRa1276) | Wiring on the cover: <br>D2 to RESET<br>D3 to DIO0<br>D4 to CS<br>D5 to DIO1 |

examples/BresserWeatherSensorMQTTCustom/src/WeatherSensorCfg.h

@@ -42,6 +42,7 @@
 // 20230330 Added pin definitions and changes for Adafruit Feather 32u4 (AVR) RFM95 LoRa Radio 
 // 20230412 Added workaround for Professional Wind Gauge / Anemometer, P/N 7002531
 // 20230420 Added pin definitions for DFRobot FireBeetle ESP32 with FireBeetle Cover LoRa
+// 20230607 Added pin definitions for Heltec WiFi LoRa 32(V2)
 //
 // ToDo:
 // -
@@ -81,6 +82,10 @@
 // in the Arduino IDE:
 //#define ARDUINO_heltec_wireless_stick
 
+// This define is set by selecting "Board: Heltec WiFi LoRa 32(V2)"
+// in the Adruino IDE:
+//#define ARDUINO_heltec_wifi_lora_32_V2
+
 // Adafruit Feather ESP32S2 with RFM95W "FeatherWing" ADA3232
 // https://github.com/espressif/arduino-esp32/blob/master/variants/adafruit_feather_esp32s2/pins_arduino.h
 //
@@ -116,6 +121,10 @@
     #pragma message("ARDUINO_heltec_wireless_stick defined; using on-board transceiver")
     #define USE_SX1276
 
+#elif defined(ARDUINO_heltec_wifi_lora_32_V2)
+    #pragma message("ARDUINO_heltec_wifi_lora_32_V2 defined; using on-board transceiver")
+    #define USE_SX1276
+
 #elif defined(ARDUINO_ADAFRUIT_FEATHER_ESP32S2)
     #pragma message("ARDUINO_ADAFRUIT_FEATHER_ESP32S2 defined; assuming RFM95W FeatherWing will be used")
     #define USE_SX1276
@@ -125,15 +134,27 @@
     #define USE_SX1276
     #pragma message("Required wiring: A to RST, B to DIO1, D to DIO0, E to CS")
 
-#elif defined(ARDUINO_ESP32_DEV)
-    #pragma message("Generic ESP32; assuming this is the LoRaWAN_Node board (DFRobot Firebeetle32 + Adafruit RFM95W LoRa Radio)")
-    #define LORAWAN_NODE
-    #define USE_SX1276
-
 #elif defined(ARDUINO_AVR_FEATHER32U4)
     #pragma message("ARDUINO_AVR_FEATHER32U4 defined; assuming this is the Arduino Feather 32u4 RFM95 LoRa Radio")
     #define USE_SX1276
-
+
+#elif defined(ARDUINO_ESP32_DEV)
+    //#define LORAWAN_NODE
+    #define FIREBEETLE_ESP32_COVER_LORA
+
+    #if !defined(LORAWAN_NODE) && !defined(FIREBEETLE_ESP32_COVER_LORA)
+        #pragma message("ARDUINO_ESP32_DEV defined; select either LORAWAN_NODE or FIREBEETLE_ESP32_COVER_LORA manually!")
+
+    #elif defined(LORAWAN_NODE) 
+        #pragma message("LORAWAN_NODE defined; assuming this is the LoRaWAN_Node board (DFRobot Firebeetle32 + Adafruit RFM95W LoRa Radio)")
+        #define USE_SX1276
+
+    #elif defined(FIREBEETLE_ESP32_COVER_LORA)
+        #define USE_SX1276
+        #pragma message("FIREBEETLE_ESP32_COVER_LORA defined; assuming this is a FireBeetle ESP32 with FireBeetle Cover LoRa")
+        #pragma message("Required wiring: D2 to RESET, D3 to DIO0, D4 to CS, D5 to DIO1")
+
+    #endif
 #endif
 
 
@@ -219,6 +240,7 @@
 
 #endif
 
+
 //   Replacement for
 //   https://github.com/espressif/arduino-esp32/blob/master/cores/esp32/esp32-hal-log.h
 //   on Arduino AVR:
@@ -315,6 +337,18 @@
     // RFM95W/SX127x - GPIOxx / CC1101 - RADIOLIB_NC
     #define PIN_RECEIVER_RST  12
 
+#elif defined(FIREBEETLE_ESP32_COVER_LORA)
+    #define PIN_RECEIVER_CS   27 // D4
+
+    // CC1101: GDO0 / RFM95W/SX127x: G0
+    #define PIN_RECEIVER_IRQ  26 // D3
+
+    // CC1101: GDO2 / RFM95W/SX127x: G1
+    #define PIN_RECEIVER_GPIO 9  // D5
+
+    // RFM95W/SX127x - GPIOxx / CC1101 - RADIOLIB_NC
+    #define PIN_RECEIVER_RST  25 // D2
+
 #elif defined(ARDUINO_TTGO_LoRa32_V1) || defined(ARDUINO_TTGO_LoRa32_V2)
     // Use pinning for LILIGO TTGO LoRa32-OLED
     #define PIN_RECEIVER_CS   LORA_CS
@@ -343,8 +377,8 @@
     // RFM95W/SX127x - GPIOxx / CC1101 - RADIOLIB_NC
     #define PIN_RECEIVER_RST  LORA_RST
 
-#elif defined(ARDUINO_heltec_wireless_stick)
-    // Use pinning for Heltec Wireless Stick
+#elif defined(ARDUINO_heltec_wireless_stick) || defined(ARDUINO_heltec_wifi_lora_32_V2)
+    // Use pinning for Heltec Wireless Stick or WiFi LoRa32 V2, respectively
     #define PIN_RECEIVER_CS   SS
 
     // CC1101: GDO0 / RFM95W/SX127x: G0
@@ -394,7 +428,7 @@
 
     // RFM95W/SX127x - GPIOxx / CC1101 - RADIOLIB_NC
     #define PIN_RECEIVER_RST  32
-
+    
 #elif defined(ESP8266)
     // Generic pinning for ESP8266 development boards (e.g. LOLIN/WEMOS D1 mini)
     #define PIN_RECEIVER_CS   15
@@ -407,9 +441,9 @@
 
     // RFM95W/SX127x - GPIOxx / CC1101 - RADIOLIB_NC
     #define PIN_RECEIVER_RST  2
-
+    
 #elif defined(ARDUINO_AVR_FEATHER32U4)
-        // Pinning for Adafruit Feather 32u4 
+    // Pinning for Adafruit Feather 32u4 
     #define PIN_RECEIVER_CS   8
 
     // CC1101: GDO0 / RFM95W/SX127x: G0

src/WeatherSensorCfg.h

@@ -42,6 +42,7 @@
 // 20230330 Added pin definitions and changes for Adafruit Feather 32u4 (AVR) RFM95 LoRa Radio 
 // 20230412 Added workaround for Professional Wind Gauge / Anemometer, P/N 7002531
 // 20230420 Added pin definitions for DFRobot FireBeetle ESP32 with FireBeetle Cover LoRa
+// 20230607 Added pin definitions for Heltec WiFi LoRa 32(V2)
 //
 // ToDo:
 // -
@@ -81,6 +82,10 @@
 // in the Arduino IDE:
 //#define ARDUINO_heltec_wireless_stick
 
+// This define is set by selecting "Board: Heltec WiFi LoRa 32(V2)"
+// in the Adruino IDE:
+//#define ARDUINO_heltec_wifi_lora_32_V2
+
 // Adafruit Feather ESP32S2 with RFM95W "FeatherWing" ADA3232
 // https://github.com/espressif/arduino-esp32/blob/master/variants/adafruit_feather_esp32s2/pins_arduino.h
 //
@@ -116,6 +121,10 @@
     #pragma message("ARDUINO_heltec_wireless_stick defined; using on-board transceiver")
     #define USE_SX1276
 
+#elif defined(ARDUINO_heltec_wifi_lora_32_V2)
+    #pragma message("ARDUINO_heltec_wifi_lora_32_V2 defined; using on-board transceiver")
+    #define USE_SX1276
+
 #elif defined(ARDUINO_ADAFRUIT_FEATHER_ESP32S2)
     #pragma message("ARDUINO_ADAFRUIT_FEATHER_ESP32S2 defined; assuming RFM95W FeatherWing will be used")
     #define USE_SX1276
@@ -368,8 +377,8 @@
     // RFM95W/SX127x - GPIOxx / CC1101 - RADIOLIB_NC
     #define PIN_RECEIVER_RST  LORA_RST
 
-#elif defined(ARDUINO_heltec_wireless_stick)
-    // Use pinning for Heltec Wireless Stick
+#elif defined(ARDUINO_heltec_wireless_stick) || defined(ARDUINO_heltec_wifi_lora_32_V2)
+    // Use pinning for Heltec Wireless Stick or WiFi LoRa32 V2, respectively
     #define PIN_RECEIVER_CS   SS
 
     // CC1101: GDO0 / RFM95W/SX127x: G0

src/WeatherSensorCfg.h.template

@@ -42,6 +42,7 @@
 // 20230330 Added pin definitions and changes for Adafruit Feather 32u4 (AVR) RFM95 LoRa Radio 
 // 20230412 Added workaround for Professional Wind Gauge / Anemometer, P/N 7002531
 // 20230420 Added pin definitions for DFRobot FireBeetle ESP32 with FireBeetle Cover LoRa
+// 20230607 Added pin definitions for Heltec WiFi LoRa 32(V2)
 //
 // ToDo:
 // -
@@ -81,6 +82,10 @@
 // in the Arduino IDE:
 //#define ARDUINO_heltec_wireless_stick
 
+// This define is set by selecting "Board: Heltec WiFi LoRa 32(V2)"
+// in the Adruino IDE:
+//#define ARDUINO_heltec_wifi_lora_32_V2
+
 // Adafruit Feather ESP32S2 with RFM95W "FeatherWing" ADA3232
 // https://github.com/espressif/arduino-esp32/blob/master/variants/adafruit_feather_esp32s2/pins_arduino.h
 //
@@ -116,6 +121,10 @@
     #pragma message("ARDUINO_heltec_wireless_stick defined; using on-board transceiver")
     #define USE_SX1276
 
+#elif defined(ARDUINO_heltec_wifi_lora_32_V2)
+    #pragma message("ARDUINO_heltec_wifi_lora_32_V2 defined; using on-board transceiver")
+    #define USE_SX1276
+
 #elif defined(ARDUINO_ADAFRUIT_FEATHER_ESP32S2)
     #pragma message("ARDUINO_ADAFRUIT_FEATHER_ESP32S2 defined; assuming RFM95W FeatherWing will be used")
     #define USE_SX1276
@@ -125,15 +134,27 @@
     #define USE_SX1276
     #pragma message("Required wiring: A to RST, B to DIO1, D to DIO0, E to CS")
 
-#elif defined(ARDUINO_ESP32_DEV)
-    #pragma message("Generic ESP32; assuming this is the LoRaWAN_Node board (DFRobot Firebeetle32 + Adafruit RFM95W LoRa Radio)")
-    #define LORAWAN_NODE
-    #define USE_SX1276
-
 #elif defined(ARDUINO_AVR_FEATHER32U4)
     #pragma message("ARDUINO_AVR_FEATHER32U4 defined; assuming this is the Arduino Feather 32u4 RFM95 LoRa Radio")
     #define USE_SX1276
-
+
+#elif defined(ARDUINO_ESP32_DEV)
+    //#define LORAWAN_NODE
+    #define FIREBEETLE_ESP32_COVER_LORA
+
+    #if !defined(LORAWAN_NODE) && !defined(FIREBEETLE_ESP32_COVER_LORA)
+        #pragma message("ARDUINO_ESP32_DEV defined; select either LORAWAN_NODE or FIREBEETLE_ESP32_COVER_LORA manually!")
+
+    #elif defined(LORAWAN_NODE) 
+        #pragma message("LORAWAN_NODE defined; assuming this is the LoRaWAN_Node board (DFRobot Firebeetle32 + Adafruit RFM95W LoRa Radio)")
+        #define USE_SX1276
+
+    #elif defined(FIREBEETLE_ESP32_COVER_LORA)
+        #define USE_SX1276
+        #pragma message("FIREBEETLE_ESP32_COVER_LORA defined; assuming this is a FireBeetle ESP32 with FireBeetle Cover LoRa")
+        #pragma message("Required wiring: D2 to RESET, D3 to DIO0, D4 to CS, D5 to DIO1")
+
+    #endif
 #endif
 
 
@@ -219,6 +240,7 @@
 
 #endif
 
+
 //   Replacement for
 //   https://github.com/espressif/arduino-esp32/blob/master/cores/esp32/esp32-hal-log.h
 //   on Arduino AVR:
@@ -315,6 +337,18 @@
     // RFM95W/SX127x - GPIOxx / CC1101 - RADIOLIB_NC
     #define PIN_RECEIVER_RST  12
 
+#elif defined(FIREBEETLE_ESP32_COVER_LORA)
+    #define PIN_RECEIVER_CS   27 // D4
+
+    // CC1101: GDO0 / RFM95W/SX127x: G0
+    #define PIN_RECEIVER_IRQ  26 // D3
+
+    // CC1101: GDO2 / RFM95W/SX127x: G1
+    #define PIN_RECEIVER_GPIO 9  // D5
+
+    // RFM95W/SX127x - GPIOxx / CC1101 - RADIOLIB_NC
+    #define PIN_RECEIVER_RST  25 // D2
+
 #elif defined(ARDUINO_TTGO_LoRa32_V1) || defined(ARDUINO_TTGO_LoRa32_V2)
     // Use pinning for LILIGO TTGO LoRa32-OLED
     #define PIN_RECEIVER_CS   LORA_CS
@@ -343,8 +377,8 @@
     // RFM95W/SX127x - GPIOxx / CC1101 - RADIOLIB_NC
     #define PIN_RECEIVER_RST  LORA_RST
 
-#elif defined(ARDUINO_heltec_wireless_stick)
-    // Use pinning for Heltec Wireless Stick
+#elif defined(ARDUINO_heltec_wireless_stick) || defined(ARDUINO_heltec_wifi_lora_32_V2)
+    // Use pinning for Heltec Wireless Stick or WiFi LoRa32 V2, respectively
     #define PIN_RECEIVER_CS   SS
 
     // CC1101: GDO0 / RFM95W/SX127x: G0
@@ -394,7 +428,7 @@
 
     // RFM95W/SX127x - GPIOxx / CC1101 - RADIOLIB_NC
     #define PIN_RECEIVER_RST  32
-
+    
 #elif defined(ESP8266)
     // Generic pinning for ESP8266 development boards (e.g. LOLIN/WEMOS D1 mini)
     #define PIN_RECEIVER_CS   15
@@ -407,9 +441,9 @@
 
     // RFM95W/SX127x - GPIOxx / CC1101 - RADIOLIB_NC
     #define PIN_RECEIVER_RST  2
-
+    
 #elif defined(ARDUINO_AVR_FEATHER32U4)
-        // Pinning for Adafruit Feather 32u4 
+    // Pinning for Adafruit Feather 32u4 
     #define PIN_RECEIVER_CS   8
 
     // CC1101: GDO0 / RFM95W/SX127x: G0