Fixup momoka_ergo (qmk#18704)

keyboards/momoka_ergo/config.h

@@ -23,30 +23,26 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_ROWS 14
 #define MATRIX_COLS 6
 
-/*
- * Keyboard Matrix Assignments
- *
- * Change this to how you wired your keyboard
- * COLS: AVR pins used for columns, left to right
- * ROWS: AVR pins used for rows, top to bottom
- * DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
- *                  ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
- *
- */
 #define MATRIX_ROW_PINS { C6, D7, E6, B4, B5, B6, B7 }
 #define MATRIX_COL_PINS { F7, F6, F5, F4, F1, F0 }
 
 /* COL2ROW, ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 #define SELECT_SOFT_SERIAL_SPEED 5
+
 /*
  * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
  */
 #define SOFT_SERIAL_PIN D1  // or D1, D2, D3, E6
 
 #define RGB_DI_PIN C7
-#define RGBLIGHT_ANIMATIONS
 #define RGBLED_NUM 22
+#define RGBLIGHT_EFFECT_BREATHING
+#define RGBLIGHT_EFFECT_CHRISTMAS
+#define RGBLIGHT_EFFECT_KNIGHT
+#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
+#define RGBLIGHT_EFFECT_STATIC_GRADIENT
+#define RGBLIGHT_EFFECT_TWINKLE
 #define RGBLED_SPLIT { 11, 11 }
 #define RGBLIGHT_HUE_STEP 8
 #define RGBLIGHT_SAT_STEP 8
@@ -55,60 +51,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 3	
 
-/* define if matrix has ghost (lacks anti-ghosting diodes) */
-//#define MATRIX_HAS_GHOST
-
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE
 /* Locking resynchronize hack */
 #define LOCKING_RESYNC_ENABLE
 
-/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
- * This is useful for the Windows task manager shortcut (ctrl+shift+esc).
- */
-//#define GRAVE_ESC_CTRL_OVERRIDE
-
-/*
- * Force NKRO
- *
- * Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
- * state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
- * makefile for this to work.)
- *
- * If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
- * until the next keyboard reset.
- *
- * NKRO may prevent your keystrokes from being detected in the BIOS, but it is
- * fully operational during normal computer usage.
- *
- * For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
- * or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
- * bootmagic, NKRO mode will always be enabled until it is toggled again during a
- * power-up.
- *
- */
-//#define FORCE_NKRO
-
-/*
- * Feature disable options
- *  These options are also useful to firmware size reduction.
- */
-
-/* disable debug print */
-//#define NO_DEBUG
-
-/* disable print */
-//#define NO_PRINT
-
-/* disable action features */
-//#define NO_ACTION_LAYER
-//#define NO_ACTION_TAPPING
-//#define NO_ACTION_ONESHOT
-
-/* Bootmagic Lite key configuration */
-//#define BOOTMAGIC_LITE_ROW 0
-//#define BOOTMAGIC_LITE_COLUMN 0	
-
-#define USE_SERIAL
 #define SPLIT_USB_DETECT
 #define EE_HANDS

keyboards/momoka_ergo/keymaps/via/keymap.c

@@ -37,7 +37,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                                                       KC_BSPC, KC_DEL,  KC_END,     KC_PGDN, KC_ENT,  KC_SPC
     ),
     [_FN1] = LAYOUT(
-        RESET,    KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,                                          KC_F7,   KC_F8,   KC_F9,    KC_F10,  KC_F11,  KC_F12,
+        QK_BOOT,  KC_F2,   KC_F3,   KC_F4,   KC_F5,   KC_F6,                                          KC_F7,   KC_F8,   KC_F9,    KC_F10,  KC_F11,  KC_F12,
         KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                                        KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS,
         KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                                        KC_TRNS, KC_TRNS, KC_TRNS,  KC_TRNS, KC_TRNS, KC_TRNS,
         MO(_FN2), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,                                        KC_TRNS, KC_TRNS, RGB_RMOD, RGB_MOD, RGB_TOG, MO(_FN2),